GetUsageStatistics TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "guardduty"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://guardduty.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "guardduty.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateInt $json "maxResults" 123
CkJsonObject_UpdateString $json "nextToken" "string"
CkJsonObject_UpdateString $json "unit" "string"
CkJsonObject_UpdateString $json "usageCriteria.accountIds[0]" "string"
CkJsonObject_UpdateString $json "usageCriteria.dataSources[0]" "string"
CkJsonObject_UpdateString $json "usageCriteria.resources[0]" "string"
CkJsonObject_UpdateString $json "usageStatisticsType" "string"
# The JSON request body created by the above code:
# {
# "maxResults": number,
# "nextToken": "string",
# "unit": "string",
# "usageCriteria": {
# "accountIds": [
# "string"
# ],
# "dataSources": [
# "string"
# ],
# "resources": [
# "string"
# ]
# },
# "usageStatisticsType": "string"
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "GetUsageStatistics"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/detector/{detectorId}/usage/statistics" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set nextToken [CkJsonObject_stringOf $jResp "nextToken"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "usageStatistics.sumByAccount"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set accountId [CkJsonObject_stringOf $jResp "usageStatistics.sumByAccount[i].accountId"]
set Amount [CkJsonObject_stringOf $jResp "usageStatistics.sumByAccount[i].total.amount"]
set Unit [CkJsonObject_stringOf $jResp "usageStatistics.sumByAccount[i].total.unit"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "usageStatistics.sumByDataSource"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set dataSource [CkJsonObject_stringOf $jResp "usageStatistics.sumByDataSource[i].dataSource"]
set totalAmount [CkJsonObject_stringOf $jResp "usageStatistics.sumByDataSource[i].total.amount"]
set totalUnit [CkJsonObject_stringOf $jResp "usageStatistics.sumByDataSource[i].total.unit"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "usageStatistics.sumByResource"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set resource [CkJsonObject_stringOf $jResp "usageStatistics.sumByResource[i].resource"]
set totalAmount [CkJsonObject_stringOf $jResp "usageStatistics.sumByResource[i].total.amount"]
set totalUnit [CkJsonObject_stringOf $jResp "usageStatistics.sumByResource[i].total.unit"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "usageStatistics.topResources"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set resource [CkJsonObject_stringOf $jResp "usageStatistics.topResources[i].resource"]
set totalAmount [CkJsonObject_stringOf $jResp "usageStatistics.topResources[i].total.amount"]
set totalUnit [CkJsonObject_stringOf $jResp "usageStatistics.topResources[i].total.unit"]
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "nextToken": "string",
# "usageStatistics": {
# "sumByAccount": [
# {
# "accountId": "string",
# "total": {
# "amount": "string",
# "unit": "string"
# }
# }
# ],
# "sumByDataSource": [
# {
# "dataSource": "string",
# "total": {
# "amount": "string",
# "unit": "string"
# }
# }
# ],
# "sumByResource": [
# {
# "resource": "string",
# "total": {
# "amount": "string",
# "unit": "string"
# }
# }
# ],
# "topResources": [
# {
# "resource": "string",
# "total": {
# "amount": "string",
# "unit": "string"
# }
# }
# ]
# }
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp