ListIncomingTypedLinks TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "clouddirectory"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://clouddirectory.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "clouddirectory.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateString $json "ConsistencyLevel" "string"
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].AttributeName" "string"
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.EndMode" "string"
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.EndValue.BinaryValue" 123
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.EndValue.BooleanValue" 123
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.EndValue.DatetimeValue" 123
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.EndValue.NumberValue" "string"
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.EndValue.StringValue" "string"
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.StartMode" "string"
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.StartValue.BinaryValue" 123
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.StartValue.BooleanValue" 123
CkJsonObject_UpdateInt $json "FilterAttributeRanges[0].Range.StartValue.DatetimeValue" 123
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.StartValue.NumberValue" "string"
CkJsonObject_UpdateString $json "FilterAttributeRanges[0].Range.StartValue.StringValue" "string"
CkJsonObject_UpdateString $json "FilterTypedLink.SchemaArn" "string"
CkJsonObject_UpdateString $json "FilterTypedLink.TypedLinkName" "string"
CkJsonObject_UpdateInt $json "MaxResults" 123
CkJsonObject_UpdateString $json "NextToken" "string"
CkJsonObject_UpdateString $json "ObjectReference.Selector" "string"
# The JSON request body created by the above code:
# {
# "ConsistencyLevel": "string",
# "FilterAttributeRanges": [
# {
# "AttributeName": "string",
# "Range": {
# "EndMode": "string",
# "EndValue": {
# "BinaryValue": blob,
# "BooleanValue": boolean,
# "DatetimeValue": number,
# "NumberValue": "string",
# "StringValue": "string"
# },
# "StartMode": "string",
# "StartValue": {
# "BinaryValue": blob,
# "BooleanValue": boolean,
# "DatetimeValue": number,
# "NumberValue": "string",
# "StringValue": "string"
# }
# }
# }
# ],
# "FilterTypedLink": {
# "SchemaArn": "string",
# "TypedLinkName": "string"
# },
# "MaxResults": number,
# "NextToken": "string",
# "ObjectReference": {
# "Selector": "string"
# }
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "ListIncomingTypedLinks"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/amazonclouddirectory/2017-01-11/typedlink/incoming" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set NextToken [CkJsonObject_stringOf $jResp "NextToken"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "LinkSpecifiers"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set Selector [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].SourceObjectReference.Selector"]
set TargetObjectReferenceSelector [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].TargetObjectReference.Selector"]
set SchemaArn [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].TypedLinkFacet.SchemaArn"]
set TypedLinkName [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].TypedLinkFacet.TypedLinkName"]
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "LinkSpecifiers[i].IdentityAttributeValues"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set AttributeName [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].AttributeName"]
set BinaryValue [CkJsonObject_IntOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].Value.BinaryValue"]
set BooleanValue [CkJsonObject_IntOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].Value.BooleanValue"]
set DatetimeValue [CkJsonObject_IntOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].Value.DatetimeValue"]
set NumberValue [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].Value.NumberValue"]
set StringValue [CkJsonObject_stringOf $jResp "LinkSpecifiers[i].IdentityAttributeValues[j].Value.StringValue"]
set j [expr $j + 1]
}
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "LinkSpecifiers": [
# {
# "IdentityAttributeValues": [
# {
# "AttributeName": "string",
# "Value": {
# "BinaryValue": blob,
# "BooleanValue": boolean,
# "DatetimeValue": number,
# "NumberValue": "string",
# "StringValue": "string"
# }
# }
# ],
# "SourceObjectReference": {
# "Selector": "string"
# },
# "TargetObjectReference": {
# "Selector": "string"
# },
# "TypedLinkFacet": {
# "SchemaArn": "string",
# "TypedLinkName": "string"
# }
# }
# ],
# "NextToken": "string"
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
