StopRun TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "devicefarm"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "devicefarm.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateString $json "arn" "string"
# The JSON request body created by the above code:
# {
# "arn": "string"
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "DeviceFarm_20150623.StopRun"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set AppUpload [CkJsonObject_stringOf $jResp "run.appUpload"]
set Arn [CkJsonObject_stringOf $jResp "run.arn"]
set BillingMethod [CkJsonObject_stringOf $jResp "run.billingMethod"]
set CompletedJobs [CkJsonObject_IntOf $jResp "run.completedJobs"]
set Errored [CkJsonObject_IntOf $jResp "run.counters.errored"]
set Failed [CkJsonObject_IntOf $jResp "run.counters.failed"]
set Passed [CkJsonObject_IntOf $jResp "run.counters.passed"]
set Skipped [CkJsonObject_IntOf $jResp "run.counters.skipped"]
set Stopped [CkJsonObject_IntOf $jResp "run.counters.stopped"]
set Total [CkJsonObject_IntOf $jResp "run.counters.total"]
set Warned [CkJsonObject_IntOf $jResp "run.counters.warned"]
set Created [CkJsonObject_IntOf $jResp "run.created"]
set Metered [CkJsonObject_IntOf $jResp "run.deviceMinutes.metered"]
set DeviceMinutesTotal [CkJsonObject_IntOf $jResp "run.deviceMinutes.total"]
set Unmetered [CkJsonObject_IntOf $jResp "run.deviceMinutes.unmetered"]
set DevicePoolArn [CkJsonObject_stringOf $jResp "run.devicePoolArn"]
set MatchedDevicesCount [CkJsonObject_IntOf $jResp "run.deviceSelectionResult.matchedDevicesCount"]
set MaxDevices [CkJsonObject_IntOf $jResp "run.deviceSelectionResult.maxDevices"]
set EventCount [CkJsonObject_IntOf $jResp "run.eventCount"]
set JobTimeoutMinutes [CkJsonObject_IntOf $jResp "run.jobTimeoutMinutes"]
set Locale [CkJsonObject_stringOf $jResp "run.locale"]
set Latitude [CkJsonObject_IntOf $jResp "run.location.latitude"]
set Longitude [CkJsonObject_IntOf $jResp "run.location.longitude"]
set Message [CkJsonObject_stringOf $jResp "run.message"]
set Name [CkJsonObject_stringOf $jResp "run.name"]
set NetworkProfileArn [CkJsonObject_stringOf $jResp "run.networkProfile.arn"]
set Description [CkJsonObject_stringOf $jResp "run.networkProfile.description"]
set DownlinkBandwidthBits [CkJsonObject_IntOf $jResp "run.networkProfile.downlinkBandwidthBits"]
set DownlinkDelayMs [CkJsonObject_IntOf $jResp "run.networkProfile.downlinkDelayMs"]
set DownlinkJitterMs [CkJsonObject_IntOf $jResp "run.networkProfile.downlinkJitterMs"]
set DownlinkLossPercent [CkJsonObject_IntOf $jResp "run.networkProfile.downlinkLossPercent"]
set NetworkProfileName [CkJsonObject_stringOf $jResp "run.networkProfile.name"]
set v_Type [CkJsonObject_stringOf $jResp "run.networkProfile.type"]
set UplinkBandwidthBits [CkJsonObject_IntOf $jResp "run.networkProfile.uplinkBandwidthBits"]
set UplinkDelayMs [CkJsonObject_IntOf $jResp "run.networkProfile.uplinkDelayMs"]
set UplinkJitterMs [CkJsonObject_IntOf $jResp "run.networkProfile.uplinkJitterMs"]
set UplinkLossPercent [CkJsonObject_IntOf $jResp "run.networkProfile.uplinkLossPercent"]
set ParsingResultUrl [CkJsonObject_stringOf $jResp "run.parsingResultUrl"]
set Platform [CkJsonObject_stringOf $jResp "run.platform"]
set Bluetooth [CkJsonObject_IntOf $jResp "run.radios.bluetooth"]
set Gps [CkJsonObject_IntOf $jResp "run.radios.gps"]
set Nfc [CkJsonObject_IntOf $jResp "run.radios.nfc"]
set Wifi [CkJsonObject_IntOf $jResp "run.radios.wifi"]
set Result [CkJsonObject_stringOf $jResp "run.result"]
set ResultCode [CkJsonObject_stringOf $jResp "run.resultCode"]
set Seed [CkJsonObject_IntOf $jResp "run.seed"]
set SkipAppResign [CkJsonObject_IntOf $jResp "run.skipAppResign"]
set Started [CkJsonObject_IntOf $jResp "run.started"]
set Status [CkJsonObject_stringOf $jResp "run.status"]
set runStopped [CkJsonObject_IntOf $jResp "run.stopped"]
set TestSpecArn [CkJsonObject_stringOf $jResp "run.testSpecArn"]
set TotalJobs [CkJsonObject_IntOf $jResp "run.totalJobs"]
set runType [CkJsonObject_stringOf $jResp "run.type"]
set WebUrl [CkJsonObject_stringOf $jResp "run.webUrl"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "run.customerArtifactPaths.androidPaths"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "run.customerArtifactPaths.androidPaths[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "run.customerArtifactPaths.deviceHostPaths"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "run.customerArtifactPaths.deviceHostPaths[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "run.customerArtifactPaths.iosPaths"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "run.customerArtifactPaths.iosPaths[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "run.deviceSelectionResult.filters"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set attribute [CkJsonObject_stringOf $jResp "run.deviceSelectionResult.filters[i].attribute"]
set operator [CkJsonObject_stringOf $jResp "run.deviceSelectionResult.filters[i].operator"]
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "run.deviceSelectionResult.filters[i].values"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set strVal [CkJsonObject_stringOf $jResp "run.deviceSelectionResult.filters[i].values[j]"]
set j [expr $j + 1]
}
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "run": {
# "appUpload": "string",
# "arn": "string",
# "billingMethod": "string",
# "completedJobs": number,
# "counters": {
# "errored": number,
# "failed": number,
# "passed": number,
# "skipped": number,
# "stopped": number,
# "total": number,
# "warned": number
# },
# "created": number,
# "customerArtifactPaths": {
# "androidPaths": [
# "string"
# ],
# "deviceHostPaths": [
# "string"
# ],
# "iosPaths": [
# "string"
# ]
# },
# "deviceMinutes": {
# "metered": number,
# "total": number,
# "unmetered": number
# },
# "devicePoolArn": "string",
# "deviceSelectionResult": {
# "filters": [
# {
# "attribute": "string",
# "operator": "string",
# "values": [
# "string"
# ]
# }
# ],
# "matchedDevicesCount": number,
# "maxDevices": number
# },
# "eventCount": number,
# "jobTimeoutMinutes": number,
# "locale": "string",
# "location": {
# "latitude": number,
# "longitude": number
# },
# "message": "string",
# "name": "string",
# "networkProfile": {
# "arn": "string",
# "description": "string",
# "downlinkBandwidthBits": number,
# "downlinkDelayMs": number,
# "downlinkJitterMs": number,
# "downlinkLossPercent": number,
# "name": "string",
# "type": "string",
# "uplinkBandwidthBits": number,
# "uplinkDelayMs": number,
# "uplinkJitterMs": number,
# "uplinkLossPercent": number
# },
# "parsingResultUrl": "string",
# "platform": "string",
# "radios": {
# "bluetooth": boolean,
# "gps": boolean,
# "nfc": boolean,
# "wifi": boolean
# },
# "result": "string",
# "resultCode": "string",
# "seed": number,
# "skipAppResign": boolean,
# "started": number,
# "status": "string",
# "stopped": number,
# "testSpecArn": "string",
# "totalJobs": number,
# "type": "string",
# "webUrl": "string"
# }
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
