StopRemoteAccessSession TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "devicefarm"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "devicefarm.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateString $json "arn" "string"
# The JSON request body created by the above code:
# {
# "arn": "string"
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "DeviceFarm_20150623.StopRemoteAccessSession"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set Arn [CkJsonObject_stringOf $jResp "remoteAccessSession.arn"]
set BillingMethod [CkJsonObject_stringOf $jResp "remoteAccessSession.billingMethod"]
set ClientId [CkJsonObject_stringOf $jResp "remoteAccessSession.clientId"]
set Created [CkJsonObject_IntOf $jResp "remoteAccessSession.created"]
set DeviceArn [CkJsonObject_stringOf $jResp "remoteAccessSession.device.arn"]
set Availability [CkJsonObject_stringOf $jResp "remoteAccessSession.device.availability"]
set Carrier [CkJsonObject_stringOf $jResp "remoteAccessSession.device.carrier"]
set Architecture [CkJsonObject_stringOf $jResp "remoteAccessSession.device.cpu.architecture"]
set Clock [CkJsonObject_IntOf $jResp "remoteAccessSession.device.cpu.clock"]
set Frequency [CkJsonObject_stringOf $jResp "remoteAccessSession.device.cpu.frequency"]
set FleetName [CkJsonObject_stringOf $jResp "remoteAccessSession.device.fleetName"]
set FleetType [CkJsonObject_stringOf $jResp "remoteAccessSession.device.fleetType"]
set FormFactor [CkJsonObject_stringOf $jResp "remoteAccessSession.device.formFactor"]
set HeapSize [CkJsonObject_IntOf $jResp "remoteAccessSession.device.heapSize"]
set Image [CkJsonObject_stringOf $jResp "remoteAccessSession.device.image"]
set Manufacturer [CkJsonObject_stringOf $jResp "remoteAccessSession.device.manufacturer"]
set Memory [CkJsonObject_IntOf $jResp "remoteAccessSession.device.memory"]
set Model [CkJsonObject_stringOf $jResp "remoteAccessSession.device.model"]
set ModelId [CkJsonObject_stringOf $jResp "remoteAccessSession.device.modelId"]
set Name [CkJsonObject_stringOf $jResp "remoteAccessSession.device.name"]
set Os [CkJsonObject_stringOf $jResp "remoteAccessSession.device.os"]
set Platform [CkJsonObject_stringOf $jResp "remoteAccessSession.device.platform"]
set Radio [CkJsonObject_stringOf $jResp "remoteAccessSession.device.radio"]
set RemoteAccessEnabled [CkJsonObject_IntOf $jResp "remoteAccessSession.device.remoteAccessEnabled"]
set RemoteDebugEnabled [CkJsonObject_IntOf $jResp "remoteAccessSession.device.remoteDebugEnabled"]
set Height [CkJsonObject_IntOf $jResp "remoteAccessSession.device.resolution.height"]
set Width [CkJsonObject_IntOf $jResp "remoteAccessSession.device.resolution.width"]
set Metered [CkJsonObject_IntOf $jResp "remoteAccessSession.deviceMinutes.metered"]
set Total [CkJsonObject_IntOf $jResp "remoteAccessSession.deviceMinutes.total"]
set Unmetered [CkJsonObject_IntOf $jResp "remoteAccessSession.deviceMinutes.unmetered"]
set DeviceUdid [CkJsonObject_stringOf $jResp "remoteAccessSession.deviceUdid"]
set Endpoint [CkJsonObject_stringOf $jResp "remoteAccessSession.endpoint"]
set HostAddress [CkJsonObject_stringOf $jResp "remoteAccessSession.hostAddress"]
set InstanceArn [CkJsonObject_stringOf $jResp "remoteAccessSession.instanceArn"]
set InteractionMode [CkJsonObject_stringOf $jResp "remoteAccessSession.interactionMode"]
set Message [CkJsonObject_stringOf $jResp "remoteAccessSession.message"]
set remoteAccessSessionName [CkJsonObject_stringOf $jResp "remoteAccessSession.name"]
set remoteAccessSessionRemoteDebugEnabled [CkJsonObject_IntOf $jResp "remoteAccessSession.remoteDebugEnabled"]
set RemoteRecordAppArn [CkJsonObject_stringOf $jResp "remoteAccessSession.remoteRecordAppArn"]
set RemoteRecordEnabled [CkJsonObject_IntOf $jResp "remoteAccessSession.remoteRecordEnabled"]
set Result [CkJsonObject_stringOf $jResp "remoteAccessSession.result"]
set SkipAppResign [CkJsonObject_IntOf $jResp "remoteAccessSession.skipAppResign"]
set Started [CkJsonObject_IntOf $jResp "remoteAccessSession.started"]
set Status [CkJsonObject_stringOf $jResp "remoteAccessSession.status"]
set Stopped [CkJsonObject_IntOf $jResp "remoteAccessSession.stopped"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "remoteAccessSession.device.instances"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set arn [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].arn"]
set deviceArn [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].deviceArn"]
set instanceProfileArn [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.arn"]
set Description [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.description"]
set instanceProfileName [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.name"]
set PackageCleanup [CkJsonObject_IntOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.packageCleanup"]
set RebootAfterUse [CkJsonObject_IntOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse"]
set status [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].status"]
set udid [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].udid"]
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set strVal [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]"]
set j [expr $j + 1]
}
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "remoteAccessSession.device.instances[i].labels"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set strVal [CkJsonObject_stringOf $jResp "remoteAccessSession.device.instances[i].labels[j]"]
set j [expr $j + 1]
}
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "remoteAccessSession": {
# "arn": "string",
# "billingMethod": "string",
# "clientId": "string",
# "created": number,
# "device": {
# "arn": "string",
# "availability": "string",
# "carrier": "string",
# "cpu": {
# "architecture": "string",
# "clock": number,
# "frequency": "string"
# },
# "fleetName": "string",
# "fleetType": "string",
# "formFactor": "string",
# "heapSize": number,
# "image": "string",
# "instances": [
# {
# "arn": "string",
# "deviceArn": "string",
# "instanceProfile": {
# "arn": "string",
# "description": "string",
# "excludeAppPackagesFromCleanup": [
# "string"
# ],
# "name": "string",
# "packageCleanup": boolean,
# "rebootAfterUse": boolean
# },
# "labels": [
# "string"
# ],
# "status": "string",
# "udid": "string"
# }
# ],
# "manufacturer": "string",
# "memory": number,
# "model": "string",
# "modelId": "string",
# "name": "string",
# "os": "string",
# "platform": "string",
# "radio": "string",
# "remoteAccessEnabled": boolean,
# "remoteDebugEnabled": boolean,
# "resolution": {
# "height": number,
# "width": number
# }
# },
# "deviceMinutes": {
# "metered": number,
# "total": number,
# "unmetered": number
# },
# "deviceUdid": "string",
# "endpoint": "string",
# "hostAddress": "string",
# "instanceArn": "string",
# "interactionMode": "string",
# "message": "string",
# "name": "string",
# "remoteDebugEnabled": boolean,
# "remoteRecordAppArn": "string",
# "remoteRecordEnabled": boolean,
# "result": "string",
# "skipAppResign": boolean,
# "started": number,
# "status": "string",
# "stopped": number
# }
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
