DescribeMergeConflicts TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "codecommit"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://codecommit.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "codecommit.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateString $json "conflictDetailLevel" "string"
CkJsonObject_UpdateString $json "conflictResolutionStrategy" "string"
CkJsonObject_UpdateString $json "destinationCommitSpecifier" "string"
CkJsonObject_UpdateString $json "filePath" "string"
CkJsonObject_UpdateInt $json "maxMergeHunks" 123
CkJsonObject_UpdateString $json "mergeOption" "string"
CkJsonObject_UpdateString $json "nextToken" "string"
CkJsonObject_UpdateString $json "repositoryName" "string"
CkJsonObject_UpdateString $json "sourceCommitSpecifier" "string"
# The JSON request body created by the above code:
# {
# "conflictDetailLevel": "string",
# "conflictResolutionStrategy": "string",
# "destinationCommitSpecifier": "string",
# "filePath": "string",
# "maxMergeHunks": number,
# "mergeOption": "string",
# "nextToken": "string",
# "repositoryName": "string",
# "sourceCommitSpecifier": "string"
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "CodeCommit_20150413.DescribeMergeConflicts"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set baseCommitId [CkJsonObject_stringOf $jResp "baseCommitId"]
set ContentConflict [CkJsonObject_IntOf $jResp "conflictMetadata.contentConflict"]
set FileModeConflict [CkJsonObject_IntOf $jResp "conflictMetadata.fileModeConflict"]
set Base [CkJsonObject_stringOf $jResp "conflictMetadata.fileModes.base"]
set Destination [CkJsonObject_stringOf $jResp "conflictMetadata.fileModes.destination"]
set Source [CkJsonObject_stringOf $jResp "conflictMetadata.fileModes.source"]
set FilePath [CkJsonObject_stringOf $jResp "conflictMetadata.filePath"]
set FileSizesBase [CkJsonObject_IntOf $jResp "conflictMetadata.fileSizes.base"]
set FileSizesDestination [CkJsonObject_IntOf $jResp "conflictMetadata.fileSizes.destination"]
set FileSizesSource [CkJsonObject_IntOf $jResp "conflictMetadata.fileSizes.source"]
set IsBinaryFileBase [CkJsonObject_IntOf $jResp "conflictMetadata.isBinaryFile.base"]
set IsBinaryFileDestination [CkJsonObject_IntOf $jResp "conflictMetadata.isBinaryFile.destination"]
set IsBinaryFileSource [CkJsonObject_IntOf $jResp "conflictMetadata.isBinaryFile.source"]
set MergeOperationsDestination [CkJsonObject_stringOf $jResp "conflictMetadata.mergeOperations.destination"]
set MergeOperationsSource [CkJsonObject_stringOf $jResp "conflictMetadata.mergeOperations.source"]
set NumberOfConflicts [CkJsonObject_IntOf $jResp "conflictMetadata.numberOfConflicts"]
set ObjectTypeConflict [CkJsonObject_IntOf $jResp "conflictMetadata.objectTypeConflict"]
set ObjectTypesBase [CkJsonObject_stringOf $jResp "conflictMetadata.objectTypes.base"]
set ObjectTypesDestination [CkJsonObject_stringOf $jResp "conflictMetadata.objectTypes.destination"]
set ObjectTypesSource [CkJsonObject_stringOf $jResp "conflictMetadata.objectTypes.source"]
set destinationCommitId [CkJsonObject_stringOf $jResp "destinationCommitId"]
set nextToken [CkJsonObject_stringOf $jResp "nextToken"]
set sourceCommitId [CkJsonObject_stringOf $jResp "sourceCommitId"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "mergeHunks"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set EndLine [CkJsonObject_IntOf $jResp "mergeHunks[i].base.endLine"]
set HunkContent [CkJsonObject_stringOf $jResp "mergeHunks[i].base.hunkContent"]
set StartLine [CkJsonObject_IntOf $jResp "mergeHunks[i].base.startLine"]
set destinationEndLine [CkJsonObject_IntOf $jResp "mergeHunks[i].destination.endLine"]
set destinationHunkContent [CkJsonObject_stringOf $jResp "mergeHunks[i].destination.hunkContent"]
set destinationStartLine [CkJsonObject_IntOf $jResp "mergeHunks[i].destination.startLine"]
set isConflict [CkJsonObject_IntOf $jResp "mergeHunks[i].isConflict"]
set sourceEndLine [CkJsonObject_IntOf $jResp "mergeHunks[i].source.endLine"]
set sourceHunkContent [CkJsonObject_stringOf $jResp "mergeHunks[i].source.hunkContent"]
set sourceStartLine [CkJsonObject_IntOf $jResp "mergeHunks[i].source.startLine"]
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "baseCommitId": "string",
# "conflictMetadata": {
# "contentConflict": boolean,
# "fileModeConflict": boolean,
# "fileModes": {
# "base": "string",
# "destination": "string",
# "source": "string"
# },
# "filePath": "string",
# "fileSizes": {
# "base": number,
# "destination": number,
# "source": number
# },
# "isBinaryFile": {
# "base": boolean,
# "destination": boolean,
# "source": boolean
# },
# "mergeOperations": {
# "destination": "string",
# "source": "string"
# },
# "numberOfConflicts": number,
# "objectTypeConflict": boolean,
# "objectTypes": {
# "base": "string",
# "destination": "string",
# "source": "string"
# }
# },
# "destinationCommitId": "string",
# "mergeHunks": [
# {
# "base": {
# "endLine": number,
# "hunkContent": "string",
# "startLine": number
# },
# "destination": {
# "endLine": number,
# "hunkContent": "string",
# "startLine": number
# },
# "isConflict": boolean,
# "source": {
# "endLine": number,
# "hunkContent": "string",
# "startLine": number
# }
# }
# ],
# "nextToken": "string",
# "sourceCommitId": "string"
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
