DescribeClusters TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "cloudhsm"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://cloudhsmv2.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "cloudhsmv2.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateString $json "Filters.string[0]" "string"
CkJsonObject_UpdateInt $json "MaxResults" 123
CkJsonObject_UpdateString $json "NextToken" "string"
# The JSON request body created by the above code:
# {
# "Filters": {
# "string": [
# "string"
# ]
# },
# "MaxResults": number,
# "NextToken": "string"
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "BaldrApiService.DescribeClusters"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set NextToken [CkJsonObject_stringOf $jResp "NextToken"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "Clusters"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set BackupPolicy [CkJsonObject_stringOf $jResp "Clusters[i].BackupPolicy"]
set v_Type [CkJsonObject_stringOf $jResp "Clusters[i].BackupRetentionPolicy.Type"]
set Value [CkJsonObject_stringOf $jResp "Clusters[i].BackupRetentionPolicy.Value"]
set AwsHardwareCertificate [CkJsonObject_stringOf $jResp "Clusters[i].Certificates.AwsHardwareCertificate"]
set ClusterCertificate [CkJsonObject_stringOf $jResp "Clusters[i].Certificates.ClusterCertificate"]
set ClusterCsr [CkJsonObject_stringOf $jResp "Clusters[i].Certificates.ClusterCsr"]
set HsmCertificate [CkJsonObject_stringOf $jResp "Clusters[i].Certificates.HsmCertificate"]
set ManufacturerHardwareCertificate [CkJsonObject_stringOf $jResp "Clusters[i].Certificates.ManufacturerHardwareCertificate"]
set ClusterId [CkJsonObject_stringOf $jResp "Clusters[i].ClusterId"]
set CreateTimestamp [CkJsonObject_IntOf $jResp "Clusters[i].CreateTimestamp"]
set HsmType [CkJsonObject_stringOf $jResp "Clusters[i].HsmType"]
set PreCoPassword [CkJsonObject_stringOf $jResp "Clusters[i].PreCoPassword"]
set SecurityGroup [CkJsonObject_stringOf $jResp "Clusters[i].SecurityGroup"]
set SourceBackupId [CkJsonObject_stringOf $jResp "Clusters[i].SourceBackupId"]
set State [CkJsonObject_stringOf $jResp "Clusters[i].State"]
set StateMessage [CkJsonObject_stringOf $jResp "Clusters[i].StateMessage"]
set v_String [CkJsonObject_stringOf $jResp "Clusters[i].SubnetMapping.string"]
set VpcId [CkJsonObject_stringOf $jResp "Clusters[i].VpcId"]
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "Clusters[i].Hsms"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set AvailabilityZone [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].AvailabilityZone"]
set ClusterId [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].ClusterId"]
set EniId [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].EniId"]
set EniIp [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].EniIp"]
set HsmId [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].HsmId"]
set State [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].State"]
set StateMessage [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].StateMessage"]
set SubnetId [CkJsonObject_stringOf $jResp "Clusters[i].Hsms[j].SubnetId"]
set j [expr $j + 1]
}
set j 0
set count_j [CkJsonObject_SizeOfArray $jResp "Clusters[i].TagList"]
while {$j < $count_j} {
CkJsonObject_put_J $jResp $j
set Key [CkJsonObject_stringOf $jResp "Clusters[i].TagList[j].Key"]
set Value [CkJsonObject_stringOf $jResp "Clusters[i].TagList[j].Value"]
set j [expr $j + 1]
}
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "Clusters": [
# {
# "BackupPolicy": "string",
# "BackupRetentionPolicy": {
# "Type": "string",
# "Value": "string"
# },
# "Certificates": {
# "AwsHardwareCertificate": "string",
# "ClusterCertificate": "string",
# "ClusterCsr": "string",
# "HsmCertificate": "string",
# "ManufacturerHardwareCertificate": "string"
# },
# "ClusterId": "string",
# "CreateTimestamp": number,
# "Hsms": [
# {
# "AvailabilityZone": "string",
# "ClusterId": "string",
# "EniId": "string",
# "EniIp": "string",
# "HsmId": "string",
# "State": "string",
# "StateMessage": "string",
# "SubnetId": "string"
# }
# ],
# "HsmType": "string",
# "PreCoPassword": "string",
# "SecurityGroup": "string",
# "SourceBackupId": "string",
# "State": "string",
# "StateMessage": "string",
# "SubnetMapping": {
# "string": "string"
# },
# "TagList": [
# {
# "Key": "string",
# "Value": "string"
# }
# ],
# "VpcId": "string"
# }
# ],
# "NextToken": "string"
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
