CreateRemoteAccessSession Ruby Example
require 'chilkat'
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
rest = Chilkat::CkRest.new()
authAws = Chilkat::CkAuthAws.new()
authAws.put_AccessKey("AWS_ACCESS_KEY")
authAws.put_SecretKey("AWS_SECRET_KEY")
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
authAws.put_Region("us-west-2")
authAws.put_ServiceName("devicefarm")
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
rest.SetAuthAws(authAws)
# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
success = rest.Connect("devicefarm.us-west-2.amazonaws.com",443,true,true)
if (success != true)
print "ConnectFailReason: " + rest.get_ConnectFailReason().to_s() + "\n";
print rest.lastErrorText() + "\n";
exit
end
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
json = Chilkat::CkJsonObject.new()
json.UpdateString("clientId","string")
json.UpdateString("configuration.billingMethod","string")
json.UpdateString("configuration.vpceConfigurationArns[0]","string")
json.UpdateString("deviceArn","string")
json.UpdateString("instanceArn","string")
json.UpdateString("interactionMode","string")
json.UpdateString("name","string")
json.UpdateString("projectArn","string")
json.UpdateInt("remoteDebugEnabled",123)
json.UpdateString("remoteRecordAppArn","string")
json.UpdateInt("remoteRecordEnabled",123)
json.UpdateInt("skipAppResign",123)
json.UpdateString("sshPublicKey","string")
# The JSON request body created by the above code:
# {
# "clientId": "string",
# "configuration": {
# "billingMethod": "string",
# "vpceConfigurationArns": [
# "string"
# ]
# },
# "deviceArn": "string",
# "instanceArn": "string",
# "interactionMode": "string",
# "name": "string",
# "projectArn": "string",
# "remoteDebugEnabled": boolean,
# "remoteRecordAppArn": "string",
# "remoteRecordEnabled": boolean,
# "skipAppResign": boolean,
# "sshPublicKey": "string"
# }
rest.AddHeader("Content-Type","application/x-amz-json-1.1")
rest.AddHeader("X-Amz-Target","DeviceFarm_20150623.CreateRemoteAccessSession")
sbRequestBody = Chilkat::CkStringBuilder.new()
json.EmitSb(sbRequestBody)
sbResponseBody = Chilkat::CkStringBuilder.new()
success = rest.FullRequestSb("POST","/",sbRequestBody,sbResponseBody)
if (success != true)
print rest.lastErrorText() + "\n";
exit
end
respStatusCode = rest.get_ResponseStatusCode()
print "response status code = " + respStatusCode.to_s() + "\n";
if (respStatusCode != 200)
print "Response Header:" + "\n";
print rest.responseHeader() + "\n";
print "Response Body:" + "\n";
print sbResponseBody.getAsString() + "\n";
exit
end
jResp = Chilkat::CkJsonObject.new()
jResp.LoadSb(sbResponseBody)
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
Arn = jResp.stringOf("remoteAccessSession.arn")
BillingMethod = jResp.stringOf("remoteAccessSession.billingMethod")
ClientId = jResp.stringOf("remoteAccessSession.clientId")
Created = jResp.IntOf("remoteAccessSession.created")
DeviceArn = jResp.stringOf("remoteAccessSession.device.arn")
Availability = jResp.stringOf("remoteAccessSession.device.availability")
Carrier = jResp.stringOf("remoteAccessSession.device.carrier")
Architecture = jResp.stringOf("remoteAccessSession.device.cpu.architecture")
Clock = jResp.IntOf("remoteAccessSession.device.cpu.clock")
Frequency = jResp.stringOf("remoteAccessSession.device.cpu.frequency")
FleetName = jResp.stringOf("remoteAccessSession.device.fleetName")
FleetType = jResp.stringOf("remoteAccessSession.device.fleetType")
FormFactor = jResp.stringOf("remoteAccessSession.device.formFactor")
HeapSize = jResp.IntOf("remoteAccessSession.device.heapSize")
Image = jResp.stringOf("remoteAccessSession.device.image")
Manufacturer = jResp.stringOf("remoteAccessSession.device.manufacturer")
Memory = jResp.IntOf("remoteAccessSession.device.memory")
Model = jResp.stringOf("remoteAccessSession.device.model")
ModelId = jResp.stringOf("remoteAccessSession.device.modelId")
Name = jResp.stringOf("remoteAccessSession.device.name")
Os = jResp.stringOf("remoteAccessSession.device.os")
Platform = jResp.stringOf("remoteAccessSession.device.platform")
Radio = jResp.stringOf("remoteAccessSession.device.radio")
RemoteAccessEnabled = jResp.IntOf("remoteAccessSession.device.remoteAccessEnabled")
RemoteDebugEnabled = jResp.IntOf("remoteAccessSession.device.remoteDebugEnabled")
Height = jResp.IntOf("remoteAccessSession.device.resolution.height")
Width = jResp.IntOf("remoteAccessSession.device.resolution.width")
Metered = jResp.IntOf("remoteAccessSession.deviceMinutes.metered")
Total = jResp.IntOf("remoteAccessSession.deviceMinutes.total")
Unmetered = jResp.IntOf("remoteAccessSession.deviceMinutes.unmetered")
DeviceUdid = jResp.stringOf("remoteAccessSession.deviceUdid")
Endpoint = jResp.stringOf("remoteAccessSession.endpoint")
HostAddress = jResp.stringOf("remoteAccessSession.hostAddress")
InstanceArn = jResp.stringOf("remoteAccessSession.instanceArn")
InteractionMode = jResp.stringOf("remoteAccessSession.interactionMode")
Message = jResp.stringOf("remoteAccessSession.message")
remoteAccessSessionName = jResp.stringOf("remoteAccessSession.name")
remoteAccessSessionRemoteDebugEnabled = jResp.IntOf("remoteAccessSession.remoteDebugEnabled")
RemoteRecordAppArn = jResp.stringOf("remoteAccessSession.remoteRecordAppArn")
RemoteRecordEnabled = jResp.IntOf("remoteAccessSession.remoteRecordEnabled")
Result = jResp.stringOf("remoteAccessSession.result")
SkipAppResign = jResp.IntOf("remoteAccessSession.skipAppResign")
Started = jResp.IntOf("remoteAccessSession.started")
Status = jResp.stringOf("remoteAccessSession.status")
Stopped = jResp.IntOf("remoteAccessSession.stopped")
i = 0
count_i = jResp.SizeOfArray("remoteAccessSession.device.instances")
while i < count_i
jResp.put_I(i)
arn = jResp.stringOf("remoteAccessSession.device.instances[i].arn")
deviceArn = jResp.stringOf("remoteAccessSession.device.instances[i].deviceArn")
instanceProfileArn = jResp.stringOf("remoteAccessSession.device.instances[i].instanceProfile.arn")
Description = jResp.stringOf("remoteAccessSession.device.instances[i].instanceProfile.description")
instanceProfileName = jResp.stringOf("remoteAccessSession.device.instances[i].instanceProfile.name")
PackageCleanup = jResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.packageCleanup")
RebootAfterUse = jResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse")
status = jResp.stringOf("remoteAccessSession.device.instances[i].status")
udid = jResp.stringOf("remoteAccessSession.device.instances[i].udid")
j = 0
count_j = jResp.SizeOfArray("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup")
while j < count_j
jResp.put_J(j)
strVal = jResp.stringOf("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]")
j = j + 1
end
j = 0
count_j = jResp.SizeOfArray("remoteAccessSession.device.instances[i].labels")
while j < count_j
jResp.put_J(j)
strVal = jResp.stringOf("remoteAccessSession.device.instances[i].labels[j]")
j = j + 1
end
i = i + 1
end
# A sample JSON response body parsed by the above code:
# {
# "remoteAccessSession": {
# "arn": "string",
# "billingMethod": "string",
# "clientId": "string",
# "created": number,
# "device": {
# "arn": "string",
# "availability": "string",
# "carrier": "string",
# "cpu": {
# "architecture": "string",
# "clock": number,
# "frequency": "string"
# },
# "fleetName": "string",
# "fleetType": "string",
# "formFactor": "string",
# "heapSize": number,
# "image": "string",
# "instances": [
# {
# "arn": "string",
# "deviceArn": "string",
# "instanceProfile": {
# "arn": "string",
# "description": "string",
# "excludeAppPackagesFromCleanup": [
# "string"
# ],
# "name": "string",
# "packageCleanup": boolean,
# "rebootAfterUse": boolean
# },
# "labels": [
# "string"
# ],
# "status": "string",
# "udid": "string"
# }
# ],
# "manufacturer": "string",
# "memory": number,
# "model": "string",
# "modelId": "string",
# "name": "string",
# "os": "string",
# "platform": "string",
# "radio": "string",
# "remoteAccessEnabled": boolean,
# "remoteDebugEnabled": boolean,
# "resolution": {
# "height": number,
# "width": number
# }
# },
# "deviceMinutes": {
# "metered": number,
# "total": number,
# "unmetered": number
# },
# "deviceUdid": "string",
# "endpoint": "string",
# "hostAddress": "string",
# "instanceArn": "string",
# "interactionMode": "string",
# "message": "string",
# "name": "string",
# "remoteDebugEnabled": boolean,
# "remoteRecordAppArn": "string",
# "remoteRecordEnabled": boolean,
# "result": "string",
# "skipAppResign": boolean,
# "started": number,
# "status": "string",
# "stopped": number
# }
# }
