ListUniqueProblems Powershell Example
Add-Type -Path "C:\chilkat\ChilkatDotNet47-9.5.0-x64\ChilkatDotNet47.dll"
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
$rest = New-Object Chilkat.Rest
$authAws = New-Object Chilkat.AuthAws
$authAws.AccessKey = "AWS_ACCESS_KEY"
$authAws.SecretKey = "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws.Region = "us-west-2"
$authAws.ServiceName = "devicefarm"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest.SetAuthAws($authAws)
# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest.Connect("devicefarm.us-west-2.amazonaws.com",443,$true,$true)
if ($success -ne $true) {
$("ConnectFailReason: " + $rest.ConnectFailReason)
$($rest.LastErrorText)
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
$json = New-Object Chilkat.JsonObject
$json.UpdateString("arn","string")
$json.UpdateString("nextToken","string")
# The JSON request body created by the above code:
# {
# "arn": "string",
# "nextToken": "string"
# }
$rest.AddHeader("Content-Type","application/x-amz-json-1.1")
$rest.AddHeader("X-Amz-Target","DeviceFarm_20150623.ListUniqueProblems")
$sbRequestBody = New-Object Chilkat.StringBuilder
$json.EmitSb($sbRequestBody)
$sbResponseBody = New-Object Chilkat.StringBuilder
$success = $rest.FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody)
if ($success -ne $true) {
$($rest.LastErrorText)
exit
}
$respStatusCode = $rest.ResponseStatusCode
$("response status code = " + $respStatusCode)
if ($respStatusCode -ne 200) {
$("Response Header:")
$($rest.ResponseHeader)
$("Response Body:")
$($sbResponseBody.GetAsString())
exit
}
$jResp = New-Object Chilkat.JsonObject
$jResp.LoadSb($sbResponseBody)
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
$nextToken = $jResp.StringOf("nextToken")
$i = 0
$count_i = $jResp.SizeOfArray("uniqueProblems.string")
while ($i -lt $count_i) {
$jResp.I = $i
$message = $jResp.StringOf("uniqueProblems.string[i].message")
$j = 0
$count_j = $jResp.SizeOfArray("uniqueProblems.string[i].problems")
while ($j -lt $count_j) {
$jResp.J = $j
$Arn = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.arn")
$Availability = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.availability")
$Carrier = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.carrier")
$Architecture = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.cpu.architecture")
$Clock = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.cpu.clock")
$Frequency = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.cpu.frequency")
$FleetName = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.fleetName")
$FleetType = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.fleetType")
$FormFactor = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.formFactor")
$HeapSize = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.heapSize")
$Image = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.image")
$Manufacturer = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.manufacturer")
$Memory = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.memory")
$Model = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.model")
$ModelId = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.modelId")
$Name = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.name")
$Os = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.os")
$Platform = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.platform")
$Radio = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.radio")
$RemoteAccessEnabled = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.remoteAccessEnabled")
$RemoteDebugEnabled = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.remoteDebugEnabled")
$Height = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.resolution.height")
$Width = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.resolution.width")
$jobArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].job.arn")
$jobName = $jResp.StringOf("uniqueProblems.string[i].problems[j].job.name")
$message = $jResp.StringOf("uniqueProblems.string[i].problems[j].message")
$result = $jResp.StringOf("uniqueProblems.string[i].problems[j].result")
$runArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].run.arn")
$runName = $jResp.StringOf("uniqueProblems.string[i].problems[j].run.name")
$suiteArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].suite.arn")
$suiteName = $jResp.StringOf("uniqueProblems.string[i].problems[j].suite.name")
$testArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].test.arn")
$testName = $jResp.StringOf("uniqueProblems.string[i].problems[j].test.name")
$k = 0
$count_k = $jResp.SizeOfArray("uniqueProblems.string[i].problems[j].device.instances")
while ($k -lt $count_k) {
$jResp.K = $k
$arn = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].arn")
$deviceArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].deviceArn")
$instanceProfileArn = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.arn")
$Description = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.description")
$instanceProfileName = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.name")
$PackageCleanup = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.packageCleanup")
$RebootAfterUse = $jResp.IntOf("uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.rebootAfterUse")
$status = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].status")
$udid = $jResp.StringOf("uniqueProblems.string[i].problems[j].device.instances[k].udid")
$json1 = $jResp.ObjectOf("uniqueProblems.string[i].problems[j].device.instances[k]")
$i1 = 0
$count_i1 = $json1.SizeOfArray("instanceProfile.excludeAppPackagesFromCleanup")
while ($i1 -lt $count_i1) {
$json1.I = $i1
$strVal = $json1.StringOf("instanceProfile.excludeAppPackagesFromCleanup[i]")
$i1 = $i1 + 1
}
$json1 = $jResp.ObjectOf("uniqueProblems.string[i].problems[j].device.instances[k]")
$i1 = 0
$count_i1 = $json1.SizeOfArray("labels")
while ($i1 -lt $count_i1) {
$json1.I = $i1
$strVal = $json1.StringOf("labels[i]")
$i1 = $i1 + 1
}
$k = $k + 1
}
$j = $j + 1
}
$i = $i + 1
}
# A sample JSON response body parsed by the above code:
# {
# "nextToken": "string",
# "uniqueProblems": {
# "string": [
# {
# "message": "string",
# "problems": [
# {
# "device": {
# "arn": "string",
# "availability": "string",
# "carrier": "string",
# "cpu": {
# "architecture": "string",
# "clock": number,
# "frequency": "string"
# },
# "fleetName": "string",
# "fleetType": "string",
# "formFactor": "string",
# "heapSize": number,
# "image": "string",
# "instances": [
# {
# "arn": "string",
# "deviceArn": "string",
# "instanceProfile": {
# "arn": "string",
# "description": "string",
# "excludeAppPackagesFromCleanup": [
# "string"
# ],
# "name": "string",
# "packageCleanup": boolean,
# "rebootAfterUse": boolean
# },
# "labels": [
# "string"
# ],
# "status": "string",
# "udid": "string"
# }
# ],
# "manufacturer": "string",
# "memory": number,
# "model": "string",
# "modelId": "string",
# "name": "string",
# "os": "string",
# "platform": "string",
# "radio": "string",
# "remoteAccessEnabled": boolean,
# "remoteDebugEnabled": boolean,
# "resolution": {
# "height": number,
# "width": number
# }
# },
# "job": {
# "arn": "string",
# "name": "string"
# },
# "message": "string",
# "result": "string",
# "run": {
# "arn": "string",
# "name": "string"
# },
# "suite": {
# "arn": "string",
# "name": "string"
# },
# "test": {
# "arn": "string",
# "name": "string"
# }
# }
# ]
# }
# ]
# }
# }
