Chilkat Tools

CreateRemoteAccessSession Powershell Example

AWS Device Farm

Add-Type -Path "C:\chilkat\ChilkatDotNet47-9.5.0-x64\ChilkatDotNet47.dll"

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = New-Object Chilkat.Rest

$authAws = New-Object Chilkat.AuthAws
$authAws.AccessKey = "AWS_ACCESS_KEY"
$authAws.SecretKey = "AWS_SECRET_KEY"

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws.Region = "us-west-2"
$authAws.ServiceName = "devicefarm"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest.SetAuthAws($authAws)

# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest.Connect("devicefarm.us-west-2.amazonaws.com",443,$true,$true)
if ($success -ne $true) {
    $("ConnectFailReason: " + $rest.ConnectFailReason)
    $($rest.LastErrorText)
    exit
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = New-Object Chilkat.JsonObject
$json.UpdateString("clientId","string")
$json.UpdateString("configuration.billingMethod","string")
$json.UpdateString("configuration.vpceConfigurationArns[0]","string")
$json.UpdateString("deviceArn","string")
$json.UpdateString("instanceArn","string")
$json.UpdateString("interactionMode","string")
$json.UpdateString("name","string")
$json.UpdateString("projectArn","string")
$json.UpdateInt("remoteDebugEnabled",123)
$json.UpdateString("remoteRecordAppArn","string")
$json.UpdateInt("remoteRecordEnabled",123)
$json.UpdateInt("skipAppResign",123)
$json.UpdateString("sshPublicKey","string")

# The JSON request body created by the above code:

# {
#   "clientId": "string",
#   "configuration": {
#     "billingMethod": "string",
#     "vpceConfigurationArns": [
#       "string"
#     ]
#   },
#   "deviceArn": "string",
#   "instanceArn": "string",
#   "interactionMode": "string",
#   "name": "string",
#   "projectArn": "string",
#   "remoteDebugEnabled": boolean,
#   "remoteRecordAppArn": "string",
#   "remoteRecordEnabled": boolean,
#   "skipAppResign": boolean,
#   "sshPublicKey": "string"
# }

$rest.AddHeader("Content-Type","application/x-amz-json-1.1")
$rest.AddHeader("X-Amz-Target","DeviceFarm_20150623.CreateRemoteAccessSession")

$sbRequestBody = New-Object Chilkat.StringBuilder
$json.EmitSb($sbRequestBody)
$sbResponseBody = New-Object Chilkat.StringBuilder
$success = $rest.FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody)
if ($success -ne $true) {
    $($rest.LastErrorText)
    exit
}

$respStatusCode = $rest.ResponseStatusCode
$("response status code = " + $respStatusCode)
if ($respStatusCode -ne 200) {
    $("Response Header:")
    $($rest.ResponseHeader)
    $("Response Body:")
    $($sbResponseBody.GetAsString())
    exit
}

$jResp = New-Object Chilkat.JsonObject
$jResp.LoadSb($sbResponseBody)

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$Arn = $jResp.StringOf("remoteAccessSession.arn")
$BillingMethod = $jResp.StringOf("remoteAccessSession.billingMethod")
$ClientId = $jResp.StringOf("remoteAccessSession.clientId")
$Created = $jResp.IntOf("remoteAccessSession.created")
$DeviceArn = $jResp.StringOf("remoteAccessSession.device.arn")
$Availability = $jResp.StringOf("remoteAccessSession.device.availability")
$Carrier = $jResp.StringOf("remoteAccessSession.device.carrier")
$Architecture = $jResp.StringOf("remoteAccessSession.device.cpu.architecture")
$Clock = $jResp.IntOf("remoteAccessSession.device.cpu.clock")
$Frequency = $jResp.StringOf("remoteAccessSession.device.cpu.frequency")
$FleetName = $jResp.StringOf("remoteAccessSession.device.fleetName")
$FleetType = $jResp.StringOf("remoteAccessSession.device.fleetType")
$FormFactor = $jResp.StringOf("remoteAccessSession.device.formFactor")
$HeapSize = $jResp.IntOf("remoteAccessSession.device.heapSize")
$Image = $jResp.StringOf("remoteAccessSession.device.image")
$Manufacturer = $jResp.StringOf("remoteAccessSession.device.manufacturer")
$Memory = $jResp.IntOf("remoteAccessSession.device.memory")
$Model = $jResp.StringOf("remoteAccessSession.device.model")
$ModelId = $jResp.StringOf("remoteAccessSession.device.modelId")
$Name = $jResp.StringOf("remoteAccessSession.device.name")
$Os = $jResp.StringOf("remoteAccessSession.device.os")
$Platform = $jResp.StringOf("remoteAccessSession.device.platform")
$Radio = $jResp.StringOf("remoteAccessSession.device.radio")
$RemoteAccessEnabled = $jResp.IntOf("remoteAccessSession.device.remoteAccessEnabled")
$RemoteDebugEnabled = $jResp.IntOf("remoteAccessSession.device.remoteDebugEnabled")
$Height = $jResp.IntOf("remoteAccessSession.device.resolution.height")
$Width = $jResp.IntOf("remoteAccessSession.device.resolution.width")
$Metered = $jResp.IntOf("remoteAccessSession.deviceMinutes.metered")
$Total = $jResp.IntOf("remoteAccessSession.deviceMinutes.total")
$Unmetered = $jResp.IntOf("remoteAccessSession.deviceMinutes.unmetered")
$DeviceUdid = $jResp.StringOf("remoteAccessSession.deviceUdid")
$Endpoint = $jResp.StringOf("remoteAccessSession.endpoint")
$HostAddress = $jResp.StringOf("remoteAccessSession.hostAddress")
$InstanceArn = $jResp.StringOf("remoteAccessSession.instanceArn")
$InteractionMode = $jResp.StringOf("remoteAccessSession.interactionMode")
$Message = $jResp.StringOf("remoteAccessSession.message")
$remoteAccessSessionName = $jResp.StringOf("remoteAccessSession.name")
$remoteAccessSessionRemoteDebugEnabled = $jResp.IntOf("remoteAccessSession.remoteDebugEnabled")
$RemoteRecordAppArn = $jResp.StringOf("remoteAccessSession.remoteRecordAppArn")
$RemoteRecordEnabled = $jResp.IntOf("remoteAccessSession.remoteRecordEnabled")
$Result = $jResp.StringOf("remoteAccessSession.result")
$SkipAppResign = $jResp.IntOf("remoteAccessSession.skipAppResign")
$Started = $jResp.IntOf("remoteAccessSession.started")
$Status = $jResp.StringOf("remoteAccessSession.status")
$Stopped = $jResp.IntOf("remoteAccessSession.stopped")
$i = 0
$count_i = $jResp.SizeOfArray("remoteAccessSession.device.instances")
while ($i -lt $count_i) {
    $jResp.I = $i
    $arn = $jResp.StringOf("remoteAccessSession.device.instances[i].arn")
    $deviceArn = $jResp.StringOf("remoteAccessSession.device.instances[i].deviceArn")
    $instanceProfileArn = $jResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.arn")
    $Description = $jResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.description")
    $instanceProfileName = $jResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.name")
    $PackageCleanup = $jResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.packageCleanup")
    $RebootAfterUse = $jResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse")
    $status = $jResp.StringOf("remoteAccessSession.device.instances[i].status")
    $udid = $jResp.StringOf("remoteAccessSession.device.instances[i].udid")
    $j = 0
    $count_j = $jResp.SizeOfArray("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup")
    while ($j -lt $count_j) {
        $jResp.J = $j
        $strVal = $jResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]")
        $j = $j + 1
    }

    $j = 0
    $count_j = $jResp.SizeOfArray("remoteAccessSession.device.instances[i].labels")
    while ($j -lt $count_j) {
        $jResp.J = $j
        $strVal = $jResp.StringOf("remoteAccessSession.device.instances[i].labels[j]")
        $j = $j + 1
    }

    $i = $i + 1
}

# A sample JSON response body parsed by the above code:

# {
#   "remoteAccessSession": {
#     "arn": "string",
#     "billingMethod": "string",
#     "clientId": "string",
#     "created": number,
#     "device": {
#       "arn": "string",
#       "availability": "string",
#       "carrier": "string",
#       "cpu": {
#         "architecture": "string",
#         "clock": number,
#         "frequency": "string"
#       },
#       "fleetName": "string",
#       "fleetType": "string",
#       "formFactor": "string",
#       "heapSize": number,
#       "image": "string",
#       "instances": [
#         {
#           "arn": "string",
#           "deviceArn": "string",
#           "instanceProfile": {
#             "arn": "string",
#             "description": "string",
#             "excludeAppPackagesFromCleanup": [
#               "string"
#             ],
#             "name": "string",
#             "packageCleanup": boolean,
#             "rebootAfterUse": boolean
#           },
#           "labels": [
#             "string"
#           ],
#           "status": "string",
#           "udid": "string"
#         }
#       ],
#       "manufacturer": "string",
#       "memory": number,
#       "model": "string",
#       "modelId": "string",
#       "name": "string",
#       "os": "string",
#       "platform": "string",
#       "radio": "string",
#       "remoteAccessEnabled": boolean,
#       "remoteDebugEnabled": boolean,
#       "resolution": {
#         "height": number,
#         "width": number
#       }
#     },
#     "deviceMinutes": {
#       "metered": number,
#       "total": number,
#       "unmetered": number
#     },
#     "deviceUdid": "string",
#     "endpoint": "string",
#     "hostAddress": "string",
#     "instanceArn": "string",
#     "interactionMode": "string",
#     "message": "string",
#     "name": "string",
#     "remoteDebugEnabled": boolean,
#     "remoteRecordAppArn": "string",
#     "remoteRecordEnabled": boolean,
#     "result": "string",
#     "skipAppResign": boolean,
#     "started": number,
#     "status": "string",
#     "stopped": number
#   }
# }
Chilkat Online Tools

CreateRemoteAccessSession Powershell Example

AWS Device Farm
