Chilkat Online Tools

DescribeGatewayInformation phpExt Example

AWS Storage Gateway

<?php

// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new CkRest();

$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('storagegateway');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://storagegateway.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('storagegateway.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
    print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
    print $rest->lastErrorText() . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new CkJsonObject();
$json->UpdateString('GatewayARN','string');

// The JSON request body created by the above code:

// {
//   "GatewayARN": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','StorageGateway_20130630.DescribeGatewayInformation');

$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
    print $rest->lastErrorText() . "\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->responseHeader() . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$CloudWatchLogGroupARN = $jResp->stringOf('CloudWatchLogGroupARN');
$DeprecationDate = $jResp->stringOf('DeprecationDate');
$Ec2InstanceId = $jResp->stringOf('Ec2InstanceId');
$Ec2InstanceRegion = $jResp->stringOf('Ec2InstanceRegion');
$EndpointType = $jResp->stringOf('EndpointType');
$GatewayARN = $jResp->stringOf('GatewayARN');
$GatewayCapacity = $jResp->stringOf('GatewayCapacity');
$GatewayId = $jResp->stringOf('GatewayId');
$GatewayName = $jResp->stringOf('GatewayName');
$GatewayState = $jResp->stringOf('GatewayState');
$GatewayTimezone = $jResp->stringOf('GatewayTimezone');
$GatewayType = $jResp->stringOf('GatewayType');
$HostEnvironment = $jResp->stringOf('HostEnvironment');
$HostEnvironmentId = $jResp->stringOf('HostEnvironmentId');
$LastSoftwareUpdate = $jResp->stringOf('LastSoftwareUpdate');
$NextUpdateAvailabilityDate = $jResp->stringOf('NextUpdateAvailabilityDate');
$SoftwareUpdatesEndDate = $jResp->stringOf('SoftwareUpdatesEndDate');
$VPCEndpoint = $jResp->stringOf('VPCEndpoint');
$i = 0;
$count_i = $jResp->SizeOfArray('GatewayNetworkInterfaces');
while ($i < $count_i) {
    $jResp->put_I($i);
    $Ipv4Address = $jResp->stringOf('GatewayNetworkInterfaces[i].Ipv4Address');
    $Ipv6Address = $jResp->stringOf('GatewayNetworkInterfaces[i].Ipv6Address');
    $MacAddress = $jResp->stringOf('GatewayNetworkInterfaces[i].MacAddress');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('SupportedGatewayCapacities');
while ($i < $count_i) {
    $jResp->put_I($i);
    $strVal = $jResp->stringOf('SupportedGatewayCapacities[i]');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('Tags');
while ($i < $count_i) {
    $jResp->put_I($i);
    $Key = $jResp->stringOf('Tags[i].Key');
    $Value = $jResp->stringOf('Tags[i].Value');
    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "CloudWatchLogGroupARN": "string",
//   "DeprecationDate": "string",
//   "Ec2InstanceId": "string",
//   "Ec2InstanceRegion": "string",
//   "EndpointType": "string",
//   "GatewayARN": "string",
//   "GatewayCapacity": "string",
//   "GatewayId": "string",
//   "GatewayName": "string",
//   "GatewayNetworkInterfaces": [
//     {
//       "Ipv4Address": "string",
//       "Ipv6Address": "string",
//       "MacAddress": "string"
//     }
//   ],
//   "GatewayState": "string",
//   "GatewayTimezone": "string",
//   "GatewayType": "string",
//   "HostEnvironment": "string",
//   "HostEnvironmentId": "string",
//   "LastSoftwareUpdate": "string",
//   "NextUpdateAvailabilityDate": "string",
//   "SoftwareUpdatesEndDate": "string",
//   "SupportedGatewayCapacities": [
//     "string"
//   ],
//   "Tags": [
//     {
//       "Key": "string",
//       "Value": "string"
//     }
//   ],
//   "VPCEndpoint": "string"
// }

?>