Chilkat Online Tools

DescribeLayers phpExt Example

AWS OpsWorks

<?php

// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new CkRest();

$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('opsworks');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://opsworks.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('opsworks.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
    print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
    print $rest->lastErrorText() . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new CkJsonObject();
$json->UpdateString('LayerIds[0]','string');
$json->UpdateString('StackId','string');

// The JSON request body created by the above code:

// {
//   "LayerIds": [
//     "string"
//   ],
//   "StackId": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','OpsWorks_20130218.DescribeLayers');

$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
    print $rest->lastErrorText() . "\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->responseHeader() . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$i = 0;
$count_i = $jResp->SizeOfArray('Layers');
while ($i < $count_i) {
    $jResp->put_I($i);
    $Arn = $jResp->stringOf('Layers[i].Arn');
    $v_String = $jResp->stringOf('Layers[i].Attributes.string');
    $AutoAssignElasticIps = $jResp->IntOf('Layers[i].AutoAssignElasticIps');
    $AutoAssignPublicIps = $jResp->IntOf('Layers[i].AutoAssignPublicIps');
    $Enabled = $jResp->IntOf('Layers[i].CloudWatchLogsConfiguration.Enabled');
    $CreatedAt = $jResp->stringOf('Layers[i].CreatedAt');
    $CustomInstanceProfileArn = $jResp->stringOf('Layers[i].CustomInstanceProfileArn');
    $CustomJson = $jResp->stringOf('Layers[i].CustomJson');
    $EnableAutoHealing = $jResp->IntOf('Layers[i].EnableAutoHealing');
    $InstallUpdatesOnBoot = $jResp->IntOf('Layers[i].InstallUpdatesOnBoot');
    $LayerId = $jResp->stringOf('Layers[i].LayerId');
    $DelayUntilElbConnectionsDrained = $jResp->IntOf('Layers[i].LifecycleEventConfiguration.Shutdown.DelayUntilElbConnectionsDrained');
    $ExecutionTimeout = $jResp->IntOf('Layers[i].LifecycleEventConfiguration.Shutdown.ExecutionTimeout');
    $Name = $jResp->stringOf('Layers[i].Name');
    $Shortname = $jResp->stringOf('Layers[i].Shortname');
    $StackId = $jResp->stringOf('Layers[i].StackId');
    $v_Type = $jResp->stringOf('Layers[i].Type');
    $UseEbsOptimizedInstances = $jResp->IntOf('Layers[i].UseEbsOptimizedInstances');
    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CloudWatchLogsConfiguration.LogStreams');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $BatchCount = $jResp->IntOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BatchCount');
        $BatchSize = $jResp->IntOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BatchSize');
        $BufferDuration = $jResp->IntOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BufferDuration');
        $DatetimeFormat = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].DatetimeFormat');
        $Encoding = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].Encoding');
        $File = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].File');
        $FileFingerprintLines = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].FileFingerprintLines');
        $InitialPosition = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].InitialPosition');
        $LogGroupName = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].LogGroupName');
        $MultiLineStartPattern = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].MultiLineStartPattern');
        $TimeZone = $jResp->stringOf('Layers[i].CloudWatchLogsConfiguration.LogStreams[j].TimeZone');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomRecipes.Configure');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomRecipes.Configure[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomRecipes.Deploy');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomRecipes.Deploy[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomRecipes.Setup');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomRecipes.Setup[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomRecipes.Shutdown');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomRecipes.Shutdown[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomRecipes.Undeploy');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomRecipes.Undeploy[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].CustomSecurityGroupIds');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].CustomSecurityGroupIds[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultRecipes.Configure');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultRecipes.Configure[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultRecipes.Deploy');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultRecipes.Deploy[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultRecipes.Setup');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultRecipes.Setup[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultRecipes.Shutdown');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultRecipes.Shutdown[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultRecipes.Undeploy');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultRecipes.Undeploy[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].DefaultSecurityGroupNames');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].DefaultSecurityGroupNames[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].Packages');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf('Layers[i].Packages[j]');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('Layers[i].VolumeConfigurations');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Encrypted = $jResp->IntOf('Layers[i].VolumeConfigurations[j].Encrypted');
        $Iops = $jResp->IntOf('Layers[i].VolumeConfigurations[j].Iops');
        $MountPoint = $jResp->stringOf('Layers[i].VolumeConfigurations[j].MountPoint');
        $NumberOfDisks = $jResp->IntOf('Layers[i].VolumeConfigurations[j].NumberOfDisks');
        $RaidLevel = $jResp->IntOf('Layers[i].VolumeConfigurations[j].RaidLevel');
        $Size = $jResp->IntOf('Layers[i].VolumeConfigurations[j].Size');
        $VolumeType = $jResp->stringOf('Layers[i].VolumeConfigurations[j].VolumeType');
        $j = $j + 1;
    }

    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "Layers": [
//     {
//       "Arn": "string",
//       "Attributes": {
//         "string": "string"
//       },
//       "AutoAssignElasticIps": boolean,
//       "AutoAssignPublicIps": boolean,
//       "CloudWatchLogsConfiguration": {
//         "Enabled": boolean,
//         "LogStreams": [
//           {
//             "BatchCount": number,
//             "BatchSize": number,
//             "BufferDuration": number,
//             "DatetimeFormat": "string",
//             "Encoding": "string",
//             "File": "string",
//             "FileFingerprintLines": "string",
//             "InitialPosition": "string",
//             "LogGroupName": "string",
//             "MultiLineStartPattern": "string",
//             "TimeZone": "string"
//           }
//         ]
//       },
//       "CreatedAt": "string",
//       "CustomInstanceProfileArn": "string",
//       "CustomJson": "string",
//       "CustomRecipes": {
//         "Configure": [
//           "string"
//         ],
//         "Deploy": [
//           "string"
//         ],
//         "Setup": [
//           "string"
//         ],
//         "Shutdown": [
//           "string"
//         ],
//         "Undeploy": [
//           "string"
//         ]
//       },
//       "CustomSecurityGroupIds": [
//         "string"
//       ],
//       "DefaultRecipes": {
//         "Configure": [
//           "string"
//         ],
//         "Deploy": [
//           "string"
//         ],
//         "Setup": [
//           "string"
//         ],
//         "Shutdown": [
//           "string"
//         ],
//         "Undeploy": [
//           "string"
//         ]
//       },
//       "DefaultSecurityGroupNames": [
//         "string"
//       ],
//       "EnableAutoHealing": boolean,
//       "InstallUpdatesOnBoot": boolean,
//       "LayerId": "string",
//       "LifecycleEventConfiguration": {
//         "Shutdown": {
//           "DelayUntilElbConnectionsDrained": boolean,
//           "ExecutionTimeout": number
//         }
//       },
//       "Name": "string",
//       "Packages": [
//         "string"
//       ],
//       "Shortname": "string",
//       "StackId": "string",
//       "Type": "string",
//       "UseEbsOptimizedInstances": boolean,
//       "VolumeConfigurations": [
//         {
//           "Encrypted": boolean,
//           "Iops": number,
//           "MountPoint": "string",
//           "NumberOfDisks": number,
//           "RaidLevel": number,
//           "Size": number,
//           "VolumeType": "string"
//         }
//       ]
//     }
//   ]
// }

?>