Chilkat Online Tools

DescribeFirewall phpExt Example

AWS Network Firewall

<?php

// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new CkRest();

$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('network-firewall');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://network-firewall.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('network-firewall.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
    print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
    print $rest->lastErrorText() . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new CkJsonObject();
$json->UpdateString('FirewallArn','string');
$json->UpdateString('FirewallName','string');

// The JSON request body created by the above code:

// {
//   "FirewallArn": "string",
//   "FirewallName": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.0');
$rest->AddHeader('X-Amz-Target','NetworkFirewall_20201112.DescribeFirewall');

$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
    print $rest->lastErrorText() . "\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->responseHeader() . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$DeleteProtection = $jResp->IntOf('Firewall.DeleteProtection');
$Description = $jResp->stringOf('Firewall.Description');
$KeyId = $jResp->stringOf('Firewall.EncryptionConfiguration.KeyId');
$v_Type = $jResp->stringOf('Firewall.EncryptionConfiguration.Type');
$FirewallArn = $jResp->stringOf('Firewall.FirewallArn');
$FirewallId = $jResp->stringOf('Firewall.FirewallId');
$FirewallName = $jResp->stringOf('Firewall.FirewallName');
$FirewallPolicyArn = $jResp->stringOf('Firewall.FirewallPolicyArn');
$FirewallPolicyChangeProtection = $jResp->IntOf('Firewall.FirewallPolicyChangeProtection');
$SubnetChangeProtection = $jResp->IntOf('Firewall.SubnetChangeProtection');
$VpcId = $jResp->stringOf('Firewall.VpcId');
$ConfigurationSyncStateSummary = $jResp->stringOf('FirewallStatus.ConfigurationSyncStateSummary');
$Status = $jResp->stringOf('FirewallStatus.Status');
$EndpointId = $jResp->stringOf('FirewallStatus.SyncStates.string.Attachment.EndpointId');
$AttachmentStatus = $jResp->stringOf('FirewallStatus.SyncStates.string.Attachment.Status');
$SubnetId = $jResp->stringOf('FirewallStatus.SyncStates.string.Attachment.SubnetId');
$SyncStatus = $jResp->stringOf('FirewallStatus.SyncStates.string.Config.string.SyncStatus');
$UpdateToken = $jResp->stringOf('FirewallStatus.SyncStates.string.Config.string.UpdateToken');
$UpdateToken = $jResp->stringOf('UpdateToken');
$i = 0;
$count_i = $jResp->SizeOfArray('Firewall.SubnetMappings');
while ($i < $count_i) {
    $jResp->put_I($i);
    $SubnetId = $jResp->stringOf('Firewall.SubnetMappings[i].SubnetId');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('Firewall.Tags');
while ($i < $count_i) {
    $jResp->put_I($i);
    $Key = $jResp->stringOf('Firewall.Tags[i].Key');
    $Value = $jResp->stringOf('Firewall.Tags[i].Value');
    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "Firewall": {
//     "DeleteProtection": boolean,
//     "Description": "string",
//     "EncryptionConfiguration": {
//       "KeyId": "string",
//       "Type": "string"
//     },
//     "FirewallArn": "string",
//     "FirewallId": "string",
//     "FirewallName": "string",
//     "FirewallPolicyArn": "string",
//     "FirewallPolicyChangeProtection": boolean,
//     "SubnetChangeProtection": boolean,
//     "SubnetMappings": [
//       {
//         "SubnetId": "string"
//       }
//     ],
//     "Tags": [
//       {
//         "Key": "string",
//         "Value": "string"
//       }
//     ],
//     "VpcId": "string"
//   },
//   "FirewallStatus": {
//     "ConfigurationSyncStateSummary": "string",
//     "Status": "string",
//     "SyncStates": {
//       "string": {
//         "Attachment": {
//           "EndpointId": "string",
//           "Status": "string",
//           "SubnetId": "string"
//         },
//         "Config": {
//           "string": {
//             "SyncStatus": "string",
//             "UpdateToken": "string"
//           }
//         }
//       }
//     }
//   },
//   "UpdateToken": "string"
// }

?>