Chilkat Online Tools

DescribeConnections phpExt Example

AWS Direct Connect

<?php

// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new CkRest();

$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('directconnect');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://directconnect.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('directconnect.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
    print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
    print $rest->lastErrorText() . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new CkJsonObject();
$json->UpdateString('connectionId','string');

// The JSON request body created by the above code:

// {
//   "connectionId": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','OvertureService.DescribeConnections');

$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
    print $rest->lastErrorText() . "\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->responseHeader() . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$i = 0;
$count_i = $jResp->SizeOfArray('connections');
while ($i < $count_i) {
    $jResp->put_I($i);
    $awsDevice = $jResp->stringOf('connections[i].awsDevice');
    $awsDeviceV2 = $jResp->stringOf('connections[i].awsDeviceV2');
    $awsLogicalDeviceId = $jResp->stringOf('connections[i].awsLogicalDeviceId');
    $bandwidth = $jResp->stringOf('connections[i].bandwidth');
    $connectionId = $jResp->stringOf('connections[i].connectionId');
    $connectionName = $jResp->stringOf('connections[i].connectionName');
    $connectionState = $jResp->stringOf('connections[i].connectionState');
    $encryptionMode = $jResp->stringOf('connections[i].encryptionMode');
    $hasLogicalRedundancy = $jResp->stringOf('connections[i].hasLogicalRedundancy');
    $jumboFrameCapable = $jResp->IntOf('connections[i].jumboFrameCapable');
    $lagId = $jResp->stringOf('connections[i].lagId');
    $loaIssueTime = $jResp->IntOf('connections[i].loaIssueTime');
    $location = $jResp->stringOf('connections[i].location');
    $macSecCapable = $jResp->IntOf('connections[i].macSecCapable');
    $ownerAccount = $jResp->stringOf('connections[i].ownerAccount');
    $partnerName = $jResp->stringOf('connections[i].partnerName');
    $portEncryptionStatus = $jResp->stringOf('connections[i].portEncryptionStatus');
    $providerName = $jResp->stringOf('connections[i].providerName');
    $region = $jResp->stringOf('connections[i].region');
    $vlan = $jResp->IntOf('connections[i].vlan');
    $j = 0;
    $count_j = $jResp->SizeOfArray('connections[i].macSecKeys');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $ckn = $jResp->stringOf('connections[i].macSecKeys[j].ckn');
        $secretARN = $jResp->stringOf('connections[i].macSecKeys[j].secretARN');
        $startOn = $jResp->stringOf('connections[i].macSecKeys[j].startOn');
        $state = $jResp->stringOf('connections[i].macSecKeys[j].state');
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray('connections[i].tags');
    while ($j < $count_j) {
        $jResp->put_J($j);
        $key = $jResp->stringOf('connections[i].tags[j].key');
        $value = $jResp->stringOf('connections[i].tags[j].value');
        $j = $j + 1;
    }

    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "connections": [
//     {
//       "awsDevice": "string",
//       "awsDeviceV2": "string",
//       "awsLogicalDeviceId": "string",
//       "bandwidth": "string",
//       "connectionId": "string",
//       "connectionName": "string",
//       "connectionState": "string",
//       "encryptionMode": "string",
//       "hasLogicalRedundancy": "string",
//       "jumboFrameCapable": boolean,
//       "lagId": "string",
//       "loaIssueTime": number,
//       "location": "string",
//       "macSecCapable": boolean,
//       "macSecKeys": [
//         {
//           "ckn": "string",
//           "secretARN": "string",
//           "startOn": "string",
//           "state": "string"
//         }
//       ],
//       "ownerAccount": "string",
//       "partnerName": "string",
//       "portEncryptionStatus": "string",
//       "providerName": "string",
//       "region": "string",
//       "tags": [
//         {
//           "key": "string",
//           "value": "string"
//         }
//       ],
//       "vlan": number
//     }
//   ]
// }

?>