StopRemoteAccessSession phpExt Example
<?php
// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.
$rest = new CkRest();
$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');
// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('devicefarm');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
// URL: https://devicefarm.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('devicefarm.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
print $rest->lastErrorText() . "\n";
exit;
}
// The following code creates the JSON request body.
// The JSON created by this code is shown below.
// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON
$json = new CkJsonObject();
$json->UpdateString('arn','string');
// The JSON request body created by the above code:
// {
// "arn": "string"
// }
$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','DeviceFarm_20150623.StopRemoteAccessSession');
$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
print $rest->lastErrorText() . "\n";
exit;
}
$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
print 'Response Header:' . "\n";
print $rest->responseHeader() . "\n";
print 'Response Body:' . "\n";
print $sbResponseBody->getAsString() . "\n";
exit;
}
$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);
// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.
// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON
$Arn = $jResp->stringOf('remoteAccessSession.arn');
$BillingMethod = $jResp->stringOf('remoteAccessSession.billingMethod');
$ClientId = $jResp->stringOf('remoteAccessSession.clientId');
$Created = $jResp->IntOf('remoteAccessSession.created');
$DeviceArn = $jResp->stringOf('remoteAccessSession.device.arn');
$Availability = $jResp->stringOf('remoteAccessSession.device.availability');
$Carrier = $jResp->stringOf('remoteAccessSession.device.carrier');
$Architecture = $jResp->stringOf('remoteAccessSession.device.cpu.architecture');
$Clock = $jResp->IntOf('remoteAccessSession.device.cpu.clock');
$Frequency = $jResp->stringOf('remoteAccessSession.device.cpu.frequency');
$FleetName = $jResp->stringOf('remoteAccessSession.device.fleetName');
$FleetType = $jResp->stringOf('remoteAccessSession.device.fleetType');
$FormFactor = $jResp->stringOf('remoteAccessSession.device.formFactor');
$HeapSize = $jResp->IntOf('remoteAccessSession.device.heapSize');
$Image = $jResp->stringOf('remoteAccessSession.device.image');
$Manufacturer = $jResp->stringOf('remoteAccessSession.device.manufacturer');
$Memory = $jResp->IntOf('remoteAccessSession.device.memory');
$Model = $jResp->stringOf('remoteAccessSession.device.model');
$ModelId = $jResp->stringOf('remoteAccessSession.device.modelId');
$Name = $jResp->stringOf('remoteAccessSession.device.name');
$Os = $jResp->stringOf('remoteAccessSession.device.os');
$Platform = $jResp->stringOf('remoteAccessSession.device.platform');
$Radio = $jResp->stringOf('remoteAccessSession.device.radio');
$RemoteAccessEnabled = $jResp->IntOf('remoteAccessSession.device.remoteAccessEnabled');
$RemoteDebugEnabled = $jResp->IntOf('remoteAccessSession.device.remoteDebugEnabled');
$Height = $jResp->IntOf('remoteAccessSession.device.resolution.height');
$Width = $jResp->IntOf('remoteAccessSession.device.resolution.width');
$Metered = $jResp->IntOf('remoteAccessSession.deviceMinutes.metered');
$Total = $jResp->IntOf('remoteAccessSession.deviceMinutes.total');
$Unmetered = $jResp->IntOf('remoteAccessSession.deviceMinutes.unmetered');
$DeviceUdid = $jResp->stringOf('remoteAccessSession.deviceUdid');
$Endpoint = $jResp->stringOf('remoteAccessSession.endpoint');
$HostAddress = $jResp->stringOf('remoteAccessSession.hostAddress');
$InstanceArn = $jResp->stringOf('remoteAccessSession.instanceArn');
$InteractionMode = $jResp->stringOf('remoteAccessSession.interactionMode');
$Message = $jResp->stringOf('remoteAccessSession.message');
$remoteAccessSessionName = $jResp->stringOf('remoteAccessSession.name');
$remoteAccessSessionRemoteDebugEnabled = $jResp->IntOf('remoteAccessSession.remoteDebugEnabled');
$RemoteRecordAppArn = $jResp->stringOf('remoteAccessSession.remoteRecordAppArn');
$RemoteRecordEnabled = $jResp->IntOf('remoteAccessSession.remoteRecordEnabled');
$Result = $jResp->stringOf('remoteAccessSession.result');
$SkipAppResign = $jResp->IntOf('remoteAccessSession.skipAppResign');
$Started = $jResp->IntOf('remoteAccessSession.started');
$Status = $jResp->stringOf('remoteAccessSession.status');
$Stopped = $jResp->IntOf('remoteAccessSession.stopped');
$i = 0;
$count_i = $jResp->SizeOfArray('remoteAccessSession.device.instances');
while ($i < $count_i) {
$jResp->put_I($i);
$arn = $jResp->stringOf('remoteAccessSession.device.instances[i].arn');
$deviceArn = $jResp->stringOf('remoteAccessSession.device.instances[i].deviceArn');
$instanceProfileArn = $jResp->stringOf('remoteAccessSession.device.instances[i].instanceProfile.arn');
$Description = $jResp->stringOf('remoteAccessSession.device.instances[i].instanceProfile.description');
$instanceProfileName = $jResp->stringOf('remoteAccessSession.device.instances[i].instanceProfile.name');
$PackageCleanup = $jResp->IntOf('remoteAccessSession.device.instances[i].instanceProfile.packageCleanup');
$RebootAfterUse = $jResp->IntOf('remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse');
$status = $jResp->stringOf('remoteAccessSession.device.instances[i].status');
$udid = $jResp->stringOf('remoteAccessSession.device.instances[i].udid');
$j = 0;
$count_j = $jResp->SizeOfArray('remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup');
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf('remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]');
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray('remoteAccessSession.device.instances[i].labels');
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf('remoteAccessSession.device.instances[i].labels[j]');
$j = $j + 1;
}
$i = $i + 1;
}
// A sample JSON response body parsed by the above code:
// {
// "remoteAccessSession": {
// "arn": "string",
// "billingMethod": "string",
// "clientId": "string",
// "created": number,
// "device": {
// "arn": "string",
// "availability": "string",
// "carrier": "string",
// "cpu": {
// "architecture": "string",
// "clock": number,
// "frequency": "string"
// },
// "fleetName": "string",
// "fleetType": "string",
// "formFactor": "string",
// "heapSize": number,
// "image": "string",
// "instances": [
// {
// "arn": "string",
// "deviceArn": "string",
// "instanceProfile": {
// "arn": "string",
// "description": "string",
// "excludeAppPackagesFromCleanup": [
// "string"
// ],
// "name": "string",
// "packageCleanup": boolean,
// "rebootAfterUse": boolean
// },
// "labels": [
// "string"
// ],
// "status": "string",
// "udid": "string"
// }
// ],
// "manufacturer": "string",
// "memory": number,
// "model": "string",
// "modelId": "string",
// "name": "string",
// "os": "string",
// "platform": "string",
// "radio": "string",
// "remoteAccessEnabled": boolean,
// "remoteDebugEnabled": boolean,
// "resolution": {
// "height": number,
// "width": number
// }
// },
// "deviceMinutes": {
// "metered": number,
// "total": number,
// "unmetered": number
// },
// "deviceUdid": "string",
// "endpoint": "string",
// "hostAddress": "string",
// "instanceArn": "string",
// "interactionMode": "string",
// "message": "string",
// "name": "string",
// "remoteDebugEnabled": boolean,
// "remoteRecordAppArn": "string",
// "remoteRecordEnabled": boolean,
// "result": "string",
// "skipAppResign": boolean,
// "started": number,
// "status": "string",
// "stopped": number
// }
// }
?>
