Chilkat Online Tools

DeleteImageBuilder phpAx Example

Amazon AppStream

<?php

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new COM("Chilkat_9_5_0.Rest");

$authAws = new COM("Chilkat_9_5_0.AuthAws");
$authAws->AccessKey = 'AWS_ACCESS_KEY';
$authAws->SecretKey = 'AWS_SECRET_KEY';

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->Region = 'us-west-2';
$authAws->ServiceName = 'appstream';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://appstream2.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('appstream2.us-west-2.amazonaws.com',443,1,1);
if ($success != 1) {
    print 'ConnectFailReason: ' . $rest->ConnectFailReason . "\n";
    print $rest->LastErrorText . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new COM("Chilkat_9_5_0.JsonObject");
$json->UpdateString('Name','string');

// The JSON request body created by the above code:

// {
//   "Name": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','PhotonAdminProxyService.DeleteImageBuilder');

$sbRequestBody = new COM("Chilkat_9_5_0.StringBuilder");
$json->EmitSb($sbRequestBody);
$sbResponseBody = new COM("Chilkat_9_5_0.StringBuilder");
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->LastErrorText . "\n";
    exit;
}

$respStatusCode = $rest->ResponseStatusCode;
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->ResponseHeader . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new COM("Chilkat_9_5_0.JsonObject");
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$AppstreamAgentVersion = $jResp->stringOf('ImageBuilder.AppstreamAgentVersion');
$Arn = $jResp->stringOf('ImageBuilder.Arn');
$CreatedTime = $jResp->IntOf('ImageBuilder.CreatedTime');
$Description = $jResp->stringOf('ImageBuilder.Description');
$DisplayName = $jResp->stringOf('ImageBuilder.DisplayName');
$DirectoryName = $jResp->stringOf('ImageBuilder.DomainJoinInfo.DirectoryName');
$OrganizationalUnitDistinguishedName = $jResp->stringOf('ImageBuilder.DomainJoinInfo.OrganizationalUnitDistinguishedName');
$EnableDefaultInternetAccess = $jResp->IntOf('ImageBuilder.EnableDefaultInternetAccess');
$IamRoleArn = $jResp->stringOf('ImageBuilder.IamRoleArn');
$ImageArn = $jResp->stringOf('ImageBuilder.ImageArn');
$InstanceType = $jResp->stringOf('ImageBuilder.InstanceType');
$Name = $jResp->stringOf('ImageBuilder.Name');
$EniId = $jResp->stringOf('ImageBuilder.NetworkAccessConfiguration.EniId');
$EniPrivateIpAddress = $jResp->stringOf('ImageBuilder.NetworkAccessConfiguration.EniPrivateIpAddress');
$Platform = $jResp->stringOf('ImageBuilder.Platform');
$State = $jResp->stringOf('ImageBuilder.State');
$Code = $jResp->stringOf('ImageBuilder.StateChangeReason.Code');
$Message = $jResp->stringOf('ImageBuilder.StateChangeReason.Message');
$i = 0;
$count_i = $jResp->SizeOfArray('ImageBuilder.AccessEndpoints');
while ($i < $count_i) {
    $jResp->I = $i;
    $EndpointType = $jResp->stringOf('ImageBuilder.AccessEndpoints[i].EndpointType');
    $VpceId = $jResp->stringOf('ImageBuilder.AccessEndpoints[i].VpceId');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('ImageBuilder.ImageBuilderErrors');
while ($i < $count_i) {
    $jResp->I = $i;
    $ErrorCode = $jResp->stringOf('ImageBuilder.ImageBuilderErrors[i].ErrorCode');
    $ErrorMessage = $jResp->stringOf('ImageBuilder.ImageBuilderErrors[i].ErrorMessage');
    $ErrorTimestamp = $jResp->IntOf('ImageBuilder.ImageBuilderErrors[i].ErrorTimestamp');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('ImageBuilder.VpcConfig.SecurityGroupIds');
while ($i < $count_i) {
    $jResp->I = $i;
    $strVal = $jResp->stringOf('ImageBuilder.VpcConfig.SecurityGroupIds[i]');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('ImageBuilder.VpcConfig.SubnetIds');
while ($i < $count_i) {
    $jResp->I = $i;
    $strVal = $jResp->stringOf('ImageBuilder.VpcConfig.SubnetIds[i]');
    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "ImageBuilder": {
//     "AccessEndpoints": [
//       {
//         "EndpointType": "string",
//         "VpceId": "string"
//       }
//     ],
//     "AppstreamAgentVersion": "string",
//     "Arn": "string",
//     "CreatedTime": number,
//     "Description": "string",
//     "DisplayName": "string",
//     "DomainJoinInfo": {
//       "DirectoryName": "string",
//       "OrganizationalUnitDistinguishedName": "string"
//     },
//     "EnableDefaultInternetAccess": boolean,
//     "IamRoleArn": "string",
//     "ImageArn": "string",
//     "ImageBuilderErrors": [
//       {
//         "ErrorCode": "string",
//         "ErrorMessage": "string",
//         "ErrorTimestamp": number
//       }
//     ],
//     "InstanceType": "string",
//     "Name": "string",
//     "NetworkAccessConfiguration": {
//       "EniId": "string",
//       "EniPrivateIpAddress": "string"
//     },
//     "Platform": "string",
//     "State": "string",
//     "StateChangeReason": {
//       "Code": "string",
//       "Message": "string"
//     },
//     "VpcConfig": {
//       "SecurityGroupIds": [
//         "string"
//       ],
//       "SubnetIds": [
//         "string"
//       ]
//     }
//   }
// }

?>