StopRun phpAx Example
<?php
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.
$rest = new COM("Chilkat_9_5_0.Rest");
$authAws = new COM("Chilkat_9_5_0.AuthAws");
$authAws->AccessKey = 'AWS_ACCESS_KEY';
$authAws->SecretKey = 'AWS_SECRET_KEY';
// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->Region = 'us-west-2';
$authAws->ServiceName = 'devicefarm';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
// URL: https://devicefarm.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('devicefarm.us-west-2.amazonaws.com',443,1,1);
if ($success != 1) {
print 'ConnectFailReason: ' . $rest->ConnectFailReason . "\n";
print $rest->LastErrorText . "\n";
exit;
}
// The following code creates the JSON request body.
// The JSON created by this code is shown below.
// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON
$json = new COM("Chilkat_9_5_0.JsonObject");
$json->UpdateString('arn','string');
// The JSON request body created by the above code:
// {
// "arn": "string"
// }
$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','DeviceFarm_20150623.StopRun');
$sbRequestBody = new COM("Chilkat_9_5_0.StringBuilder");
$json->EmitSb($sbRequestBody);
$sbResponseBody = new COM("Chilkat_9_5_0.StringBuilder");
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->LastErrorText . "\n";
exit;
}
$respStatusCode = $rest->ResponseStatusCode;
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
print 'Response Header:' . "\n";
print $rest->ResponseHeader . "\n";
print 'Response Body:' . "\n";
print $sbResponseBody->getAsString() . "\n";
exit;
}
$jResp = new COM("Chilkat_9_5_0.JsonObject");
$jResp->LoadSb($sbResponseBody);
// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.
// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON
$AppUpload = $jResp->stringOf('run.appUpload');
$Arn = $jResp->stringOf('run.arn');
$BillingMethod = $jResp->stringOf('run.billingMethod');
$CompletedJobs = $jResp->IntOf('run.completedJobs');
$Errored = $jResp->IntOf('run.counters.errored');
$Failed = $jResp->IntOf('run.counters.failed');
$Passed = $jResp->IntOf('run.counters.passed');
$Skipped = $jResp->IntOf('run.counters.skipped');
$Stopped = $jResp->IntOf('run.counters.stopped');
$Total = $jResp->IntOf('run.counters.total');
$Warned = $jResp->IntOf('run.counters.warned');
$Created = $jResp->IntOf('run.created');
$Metered = $jResp->IntOf('run.deviceMinutes.metered');
$DeviceMinutesTotal = $jResp->IntOf('run.deviceMinutes.total');
$Unmetered = $jResp->IntOf('run.deviceMinutes.unmetered');
$DevicePoolArn = $jResp->stringOf('run.devicePoolArn');
$MatchedDevicesCount = $jResp->IntOf('run.deviceSelectionResult.matchedDevicesCount');
$MaxDevices = $jResp->IntOf('run.deviceSelectionResult.maxDevices');
$EventCount = $jResp->IntOf('run.eventCount');
$JobTimeoutMinutes = $jResp->IntOf('run.jobTimeoutMinutes');
$Locale = $jResp->stringOf('run.locale');
$Latitude = $jResp->IntOf('run.location.latitude');
$Longitude = $jResp->IntOf('run.location.longitude');
$Message = $jResp->stringOf('run.message');
$Name = $jResp->stringOf('run.name');
$NetworkProfileArn = $jResp->stringOf('run.networkProfile.arn');
$Description = $jResp->stringOf('run.networkProfile.description');
$DownlinkBandwidthBits = $jResp->IntOf('run.networkProfile.downlinkBandwidthBits');
$DownlinkDelayMs = $jResp->IntOf('run.networkProfile.downlinkDelayMs');
$DownlinkJitterMs = $jResp->IntOf('run.networkProfile.downlinkJitterMs');
$DownlinkLossPercent = $jResp->IntOf('run.networkProfile.downlinkLossPercent');
$NetworkProfileName = $jResp->stringOf('run.networkProfile.name');
$v_Type = $jResp->stringOf('run.networkProfile.type');
$UplinkBandwidthBits = $jResp->IntOf('run.networkProfile.uplinkBandwidthBits');
$UplinkDelayMs = $jResp->IntOf('run.networkProfile.uplinkDelayMs');
$UplinkJitterMs = $jResp->IntOf('run.networkProfile.uplinkJitterMs');
$UplinkLossPercent = $jResp->IntOf('run.networkProfile.uplinkLossPercent');
$ParsingResultUrl = $jResp->stringOf('run.parsingResultUrl');
$Platform = $jResp->stringOf('run.platform');
$Bluetooth = $jResp->IntOf('run.radios.bluetooth');
$Gps = $jResp->IntOf('run.radios.gps');
$Nfc = $jResp->IntOf('run.radios.nfc');
$Wifi = $jResp->IntOf('run.radios.wifi');
$Result = $jResp->stringOf('run.result');
$ResultCode = $jResp->stringOf('run.resultCode');
$Seed = $jResp->IntOf('run.seed');
$SkipAppResign = $jResp->IntOf('run.skipAppResign');
$Started = $jResp->IntOf('run.started');
$Status = $jResp->stringOf('run.status');
$runStopped = $jResp->IntOf('run.stopped');
$TestSpecArn = $jResp->stringOf('run.testSpecArn');
$TotalJobs = $jResp->IntOf('run.totalJobs');
$runType = $jResp->stringOf('run.type');
$WebUrl = $jResp->stringOf('run.webUrl');
$i = 0;
$count_i = $jResp->SizeOfArray('run.customerArtifactPaths.androidPaths');
while ($i < $count_i) {
$jResp->I = $i;
$strVal = $jResp->stringOf('run.customerArtifactPaths.androidPaths[i]');
$i = $i + 1;
}
$i = 0;
$count_i = $jResp->SizeOfArray('run.customerArtifactPaths.deviceHostPaths');
while ($i < $count_i) {
$jResp->I = $i;
$strVal = $jResp->stringOf('run.customerArtifactPaths.deviceHostPaths[i]');
$i = $i + 1;
}
$i = 0;
$count_i = $jResp->SizeOfArray('run.customerArtifactPaths.iosPaths');
while ($i < $count_i) {
$jResp->I = $i;
$strVal = $jResp->stringOf('run.customerArtifactPaths.iosPaths[i]');
$i = $i + 1;
}
$i = 0;
$count_i = $jResp->SizeOfArray('run.deviceSelectionResult.filters');
while ($i < $count_i) {
$jResp->I = $i;
$attribute = $jResp->stringOf('run.deviceSelectionResult.filters[i].attribute');
$operator = $jResp->stringOf('run.deviceSelectionResult.filters[i].operator');
$j = 0;
$count_j = $jResp->SizeOfArray('run.deviceSelectionResult.filters[i].values');
while ($j < $count_j) {
$jResp->J = $j;
$strVal = $jResp->stringOf('run.deviceSelectionResult.filters[i].values[j]');
$j = $j + 1;
}
$i = $i + 1;
}
// A sample JSON response body parsed by the above code:
// {
// "run": {
// "appUpload": "string",
// "arn": "string",
// "billingMethod": "string",
// "completedJobs": number,
// "counters": {
// "errored": number,
// "failed": number,
// "passed": number,
// "skipped": number,
// "stopped": number,
// "total": number,
// "warned": number
// },
// "created": number,
// "customerArtifactPaths": {
// "androidPaths": [
// "string"
// ],
// "deviceHostPaths": [
// "string"
// ],
// "iosPaths": [
// "string"
// ]
// },
// "deviceMinutes": {
// "metered": number,
// "total": number,
// "unmetered": number
// },
// "devicePoolArn": "string",
// "deviceSelectionResult": {
// "filters": [
// {
// "attribute": "string",
// "operator": "string",
// "values": [
// "string"
// ]
// }
// ],
// "matchedDevicesCount": number,
// "maxDevices": number
// },
// "eventCount": number,
// "jobTimeoutMinutes": number,
// "locale": "string",
// "location": {
// "latitude": number,
// "longitude": number
// },
// "message": "string",
// "name": "string",
// "networkProfile": {
// "arn": "string",
// "description": "string",
// "downlinkBandwidthBits": number,
// "downlinkDelayMs": number,
// "downlinkJitterMs": number,
// "downlinkLossPercent": number,
// "name": "string",
// "type": "string",
// "uplinkBandwidthBits": number,
// "uplinkDelayMs": number,
// "uplinkJitterMs": number,
// "uplinkLossPercent": number
// },
// "parsingResultUrl": "string",
// "platform": "string",
// "radios": {
// "bluetooth": boolean,
// "gps": boolean,
// "nfc": boolean,
// "wifi": boolean
// },
// "result": "string",
// "resultCode": "string",
// "seed": number,
// "skipAppResign": boolean,
// "started": number,
// "status": "string",
// "stopped": number,
// "testSpecArn": "string",
// "totalJobs": number,
// "type": "string",
// "webUrl": "string"
// }
// }
?>
