ListUniqueProblems phpAx Example
<?php
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.
$rest = new COM("Chilkat_9_5_0.Rest");
$authAws = new COM("Chilkat_9_5_0.AuthAws");
$authAws->AccessKey = 'AWS_ACCESS_KEY';
$authAws->SecretKey = 'AWS_SECRET_KEY';
// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->Region = 'us-west-2';
$authAws->ServiceName = 'devicefarm';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
// URL: https://devicefarm.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('devicefarm.us-west-2.amazonaws.com',443,1,1);
if ($success != 1) {
print 'ConnectFailReason: ' . $rest->ConnectFailReason . "\n";
print $rest->LastErrorText . "\n";
exit;
}
// The following code creates the JSON request body.
// The JSON created by this code is shown below.
// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON
$json = new COM("Chilkat_9_5_0.JsonObject");
$json->UpdateString('arn','string');
$json->UpdateString('nextToken','string');
// The JSON request body created by the above code:
// {
// "arn": "string",
// "nextToken": "string"
// }
$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','DeviceFarm_20150623.ListUniqueProblems');
$sbRequestBody = new COM("Chilkat_9_5_0.StringBuilder");
$json->EmitSb($sbRequestBody);
$sbResponseBody = new COM("Chilkat_9_5_0.StringBuilder");
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->LastErrorText . "\n";
exit;
}
$respStatusCode = $rest->ResponseStatusCode;
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
print 'Response Header:' . "\n";
print $rest->ResponseHeader . "\n";
print 'Response Body:' . "\n";
print $sbResponseBody->getAsString() . "\n";
exit;
}
$jResp = new COM("Chilkat_9_5_0.JsonObject");
$jResp->LoadSb($sbResponseBody);
// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.
// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON
$nextToken = $jResp->stringOf('nextToken');
$i = 0;
$count_i = $jResp->SizeOfArray('uniqueProblems.string');
while ($i < $count_i) {
$jResp->I = $i;
$message = $jResp->stringOf('uniqueProblems.string[i].message');
$j = 0;
$count_j = $jResp->SizeOfArray('uniqueProblems.string[i].problems');
while ($j < $count_j) {
$jResp->J = $j;
$Arn = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.arn');
$Availability = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.availability');
$Carrier = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.carrier');
$Architecture = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.cpu.architecture');
$Clock = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.cpu.clock');
$Frequency = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.cpu.frequency');
$FleetName = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.fleetName');
$FleetType = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.fleetType');
$FormFactor = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.formFactor');
$HeapSize = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.heapSize');
$Image = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.image');
$Manufacturer = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.manufacturer');
$Memory = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.memory');
$Model = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.model');
$ModelId = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.modelId');
$Name = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.name');
$Os = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.os');
$Platform = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.platform');
$Radio = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.radio');
$RemoteAccessEnabled = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.remoteAccessEnabled');
$RemoteDebugEnabled = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.remoteDebugEnabled');
$Height = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.resolution.height');
$Width = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.resolution.width');
$jobArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].job.arn');
$jobName = $jResp->stringOf('uniqueProblems.string[i].problems[j].job.name');
$message = $jResp->stringOf('uniqueProblems.string[i].problems[j].message');
$result = $jResp->stringOf('uniqueProblems.string[i].problems[j].result');
$runArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].run.arn');
$runName = $jResp->stringOf('uniqueProblems.string[i].problems[j].run.name');
$suiteArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].suite.arn');
$suiteName = $jResp->stringOf('uniqueProblems.string[i].problems[j].suite.name');
$testArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].test.arn');
$testName = $jResp->stringOf('uniqueProblems.string[i].problems[j].test.name');
$k = 0;
$count_k = $jResp->SizeOfArray('uniqueProblems.string[i].problems[j].device.instances');
while ($k < $count_k) {
$jResp->K = $k;
$arn = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].arn');
$deviceArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].deviceArn');
$instanceProfileArn = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.arn');
$Description = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.description');
$instanceProfileName = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.name');
$PackageCleanup = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.packageCleanup');
$RebootAfterUse = $jResp->IntOf('uniqueProblems.string[i].problems[j].device.instances[k].instanceProfile.rebootAfterUse');
$status = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].status');
$udid = $jResp->stringOf('uniqueProblems.string[i].problems[j].device.instances[k].udid');
// json1 is a Chilkat_9_5_0.JsonObject
$json1 = $jResp->ObjectOf('uniqueProblems.string[i].problems[j].device.instances[k]');
$i1 = 0;
$count_i1 = $json1->SizeOfArray('instanceProfile.excludeAppPackagesFromCleanup');
while ($i1 < $count_i1) {
$json1->I = $i1;
$strVal = $json1->stringOf('instanceProfile.excludeAppPackagesFromCleanup[i]');
$i1 = $i1 + 1;
}
// json1 is a Chilkat_9_5_0.JsonObject
$json1 = $jResp->ObjectOf('uniqueProblems.string[i].problems[j].device.instances[k]');
$i1 = 0;
$count_i1 = $json1->SizeOfArray('labels');
while ($i1 < $count_i1) {
$json1->I = $i1;
$strVal = $json1->stringOf('labels[i]');
$i1 = $i1 + 1;
}
$k = $k + 1;
}
$j = $j + 1;
}
$i = $i + 1;
}
// A sample JSON response body parsed by the above code:
// {
// "nextToken": "string",
// "uniqueProblems": {
// "string": [
// {
// "message": "string",
// "problems": [
// {
// "device": {
// "arn": "string",
// "availability": "string",
// "carrier": "string",
// "cpu": {
// "architecture": "string",
// "clock": number,
// "frequency": "string"
// },
// "fleetName": "string",
// "fleetType": "string",
// "formFactor": "string",
// "heapSize": number,
// "image": "string",
// "instances": [
// {
// "arn": "string",
// "deviceArn": "string",
// "instanceProfile": {
// "arn": "string",
// "description": "string",
// "excludeAppPackagesFromCleanup": [
// "string"
// ],
// "name": "string",
// "packageCleanup": boolean,
// "rebootAfterUse": boolean
// },
// "labels": [
// "string"
// ],
// "status": "string",
// "udid": "string"
// }
// ],
// "manufacturer": "string",
// "memory": number,
// "model": "string",
// "modelId": "string",
// "name": "string",
// "os": "string",
// "platform": "string",
// "radio": "string",
// "remoteAccessEnabled": boolean,
// "remoteDebugEnabled": boolean,
// "resolution": {
// "height": number,
// "width": number
// }
// },
// "job": {
// "arn": "string",
// "name": "string"
// },
// "message": "string",
// "result": "string",
// "run": {
// "arn": "string",
// "name": "string"
// },
// "suite": {
// "arn": "string",
// "name": "string"
// },
// "test": {
// "arn": "string",
// "name": "string"
// }
// }
// ]
// }
// ]
// }
// }
?>
