DescribeFindings Perl Example
use chilkat();
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
$rest = chilkat::CkRest->new();
$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("inspector");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
# URL: https://inspector.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("inspector.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
print $rest->lastErrorText() . "\r\n";
exit;
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
$json = chilkat::CkJsonObject->new();
$json->UpdateString("findingArns[0]","string");
$json->UpdateString("locale","string");
# The JSON request body created by the above code:
# {
# "findingArns": [
# "string"
# ],
# "locale": "string"
# }
$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","InspectorService.DescribeFindings");
$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->lastErrorText() . "\r\n";
exit;
}
$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
print "Response Header:" . "\r\n";
print $rest->responseHeader() . "\r\n";
print "Response Body:" . "\r\n";
print $sbResponseBody->getAsString() . "\r\n";
exit;
}
$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
$FailureCode = $jResp->stringOf("failedItems.string.failureCode");
$Retryable = $jResp->IntOf("failedItems.string.retryable");
$i = 0;
$count_i = $jResp->SizeOfArray("findings");
while ($i < $count_i) {
$jResp->put_I($i);
$arn = $jResp->stringOf("findings[i].arn");
$AgentId = $jResp->stringOf("findings[i].assetAttributes.agentId");
$AmiId = $jResp->stringOf("findings[i].assetAttributes.amiId");
$AutoScalingGroup = $jResp->stringOf("findings[i].assetAttributes.autoScalingGroup");
$Hostname = $jResp->stringOf("findings[i].assetAttributes.hostname");
$SchemaVersion = $jResp->IntOf("findings[i].assetAttributes.schemaVersion");
$assetType = $jResp->stringOf("findings[i].assetType");
$confidence = $jResp->IntOf("findings[i].confidence");
$createdAt = $jResp->IntOf("findings[i].createdAt");
$description = $jResp->stringOf("findings[i].description");
$id = $jResp->stringOf("findings[i].id");
$indicatorOfCompromise = $jResp->IntOf("findings[i].indicatorOfCompromise");
$numericSeverity = $jResp->IntOf("findings[i].numericSeverity");
$recommendation = $jResp->stringOf("findings[i].recommendation");
$schemaVersion = $jResp->IntOf("findings[i].schemaVersion");
$service = $jResp->stringOf("findings[i].service");
$AssessmentRunArn = $jResp->stringOf("findings[i].serviceAttributes.assessmentRunArn");
$RulesPackageArn = $jResp->stringOf("findings[i].serviceAttributes.rulesPackageArn");
$serviceAttributesSchemaVersion = $jResp->IntOf("findings[i].serviceAttributes.schemaVersion");
$severity = $jResp->stringOf("findings[i].severity");
$title = $jResp->stringOf("findings[i].title");
$updatedAt = $jResp->IntOf("findings[i].updatedAt");
$j = 0;
$count_j = $jResp->SizeOfArray("findings[i].assetAttributes.ipv4Addresses");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("findings[i].assetAttributes.ipv4Addresses[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("findings[i].assetAttributes.networkInterfaces");
while ($j < $count_j) {
$jResp->put_J($j);
$networkInterfaceId = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].networkInterfaceId");
$privateDnsName = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].privateDnsName");
$privateIpAddress = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].privateIpAddress");
$publicDnsName = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].publicDnsName");
$publicIp = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].publicIp");
$subnetId = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].subnetId");
$vpcId = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].vpcId");
$k = 0;
$count_k = $jResp->SizeOfArray("findings[i].assetAttributes.networkInterfaces[j].ipv6Addresses");
while ($k < $count_k) {
$jResp->put_K($k);
$strVal = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].ipv6Addresses[k]");
$k = $k + 1;
}
$k = 0;
$count_k = $jResp->SizeOfArray("findings[i].assetAttributes.networkInterfaces[j].privateIpAddresses");
while ($k < $count_k) {
$jResp->put_K($k);
$privateDnsName = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].privateIpAddresses[k].privateDnsName");
$privateIpAddress = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].privateIpAddresses[k].privateIpAddress");
$k = $k + 1;
}
$k = 0;
$count_k = $jResp->SizeOfArray("findings[i].assetAttributes.networkInterfaces[j].securityGroups");
while ($k < $count_k) {
$jResp->put_K($k);
$groupId = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].securityGroups[k].groupId");
$groupName = $jResp->stringOf("findings[i].assetAttributes.networkInterfaces[j].securityGroups[k].groupName");
$k = $k + 1;
}
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("findings[i].assetAttributes.tags");
while ($j < $count_j) {
$jResp->put_J($j);
$key = $jResp->stringOf("findings[i].assetAttributes.tags[j].key");
$value = $jResp->stringOf("findings[i].assetAttributes.tags[j].value");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("findings[i].attributes");
while ($j < $count_j) {
$jResp->put_J($j);
$key = $jResp->stringOf("findings[i].attributes[j].key");
$value = $jResp->stringOf("findings[i].attributes[j].value");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("findings[i].userAttributes");
while ($j < $count_j) {
$jResp->put_J($j);
$key = $jResp->stringOf("findings[i].userAttributes[j].key");
$value = $jResp->stringOf("findings[i].userAttributes[j].value");
$j = $j + 1;
}
$i = $i + 1;
}
# A sample JSON response body parsed by the above code:
# {
# "failedItems": {
# "string": {
# "failureCode": "string",
# "retryable": boolean
# }
# },
# "findings": [
# {
# "arn": "string",
# "assetAttributes": {
# "agentId": "string",
# "amiId": "string",
# "autoScalingGroup": "string",
# "hostname": "string",
# "ipv4Addresses": [
# "string"
# ],
# "networkInterfaces": [
# {
# "ipv6Addresses": [
# "string"
# ],
# "networkInterfaceId": "string",
# "privateDnsName": "string",
# "privateIpAddress": "string",
# "privateIpAddresses": [
# {
# "privateDnsName": "string",
# "privateIpAddress": "string"
# }
# ],
# "publicDnsName": "string",
# "publicIp": "string",
# "securityGroups": [
# {
# "groupId": "string",
# "groupName": "string"
# }
# ],
# "subnetId": "string",
# "vpcId": "string"
# }
# ],
# "schemaVersion": number,
# "tags": [
# {
# "key": "string",
# "value": "string"
# }
# ]
# },
# "assetType": "string",
# "attributes": [
# {
# "key": "string",
# "value": "string"
# }
# ],
# "confidence": number,
# "createdAt": number,
# "description": "string",
# "id": "string",
# "indicatorOfCompromise": boolean,
# "numericSeverity": number,
# "recommendation": "string",
# "schemaVersion": number,
# "service": "string",
# "serviceAttributes": {
# "assessmentRunArn": "string",
# "rulesPackageArn": "string",
# "schemaVersion": number
# },
# "severity": "string",
# "title": "string",
# "updatedAt": number,
# "userAttributes": [
# {
# "key": "string",
# "value": "string"
# }
# ]
# }
# ]
# }
