Chilkat Online Tools

DescribeStacks Perl Example

Amazon AppStream

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("appstream");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://appstream2.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("appstream2.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("Names[0]","string");
$json->UpdateString("NextToken","string");

# The JSON request body created by the above code:

# {
#   "Names": [
#     "string"
#   ],
#   "NextToken": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","PhotonAdminProxyService.DescribeStacks");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$NextToken = $jResp->stringOf("NextToken");
$i = 0;
$count_i = $jResp->SizeOfArray("Stacks");
while ($i < $count_i) {
    $jResp->put_I($i);
    $Enabled = $jResp->IntOf("Stacks[i].ApplicationSettings.Enabled");
    $S3BucketName = $jResp->stringOf("Stacks[i].ApplicationSettings.S3BucketName");
    $SettingsGroup = $jResp->stringOf("Stacks[i].ApplicationSettings.SettingsGroup");
    $Arn = $jResp->stringOf("Stacks[i].Arn");
    $CreatedTime = $jResp->IntOf("Stacks[i].CreatedTime");
    $Description = $jResp->stringOf("Stacks[i].Description");
    $DisplayName = $jResp->stringOf("Stacks[i].DisplayName");
    $FeedbackURL = $jResp->stringOf("Stacks[i].FeedbackURL");
    $Name = $jResp->stringOf("Stacks[i].Name");
    $RedirectURL = $jResp->stringOf("Stacks[i].RedirectURL");
    $j = 0;
    $count_j = $jResp->SizeOfArray("Stacks[i].AccessEndpoints");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $EndpointType = $jResp->stringOf("Stacks[i].AccessEndpoints[j].EndpointType");
        $VpceId = $jResp->stringOf("Stacks[i].AccessEndpoints[j].VpceId");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Stacks[i].EmbedHostDomains");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf("Stacks[i].EmbedHostDomains[j]");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Stacks[i].StackErrors");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $ErrorCode = $jResp->stringOf("Stacks[i].StackErrors[j].ErrorCode");
        $ErrorMessage = $jResp->stringOf("Stacks[i].StackErrors[j].ErrorMessage");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Stacks[i].StorageConnectors");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $ConnectorType = $jResp->stringOf("Stacks[i].StorageConnectors[j].ConnectorType");
        $ResourceIdentifier = $jResp->stringOf("Stacks[i].StorageConnectors[j].ResourceIdentifier");
        $k = 0;
        $count_k = $jResp->SizeOfArray("Stacks[i].StorageConnectors[j].Domains");
        while ($k < $count_k) {
            $jResp->put_K($k);
            $strVal = $jResp->stringOf("Stacks[i].StorageConnectors[j].Domains[k]");
            $k = $k + 1;
        }

        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Stacks[i].UserSettings");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Action = $jResp->stringOf("Stacks[i].UserSettings[j].Action");
        $Permission = $jResp->stringOf("Stacks[i].UserSettings[j].Permission");
        $j = $j + 1;
    }

    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "NextToken": "string",
#   "Stacks": [
#     {
#       "AccessEndpoints": [
#         {
#           "EndpointType": "string",
#           "VpceId": "string"
#         }
#       ],
#       "ApplicationSettings": {
#         "Enabled": boolean,
#         "S3BucketName": "string",
#         "SettingsGroup": "string"
#       },
#       "Arn": "string",
#       "CreatedTime": number,
#       "Description": "string",
#       "DisplayName": "string",
#       "EmbedHostDomains": [
#         "string"
#       ],
#       "FeedbackURL": "string",
#       "Name": "string",
#       "RedirectURL": "string",
#       "StackErrors": [
#         {
#           "ErrorCode": "string",
#           "ErrorMessage": "string"
#         }
#       ],
#       "StorageConnectors": [
#         {
#           "ConnectorType": "string",
#           "Domains": [
#             "string"
#           ],
#           "ResourceIdentifier": "string"
#         }
#       ],
#       "UserSettings": [
#         {
#           "Action": "string",
#           "Permission": "string"
#         }
#       ]
#     }
#   ]
# }