Chilkat Online Tools

DescribeManagedRuleGroup Perl Example

AWS WAFV2

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("wafv2");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://wafv2.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("wafv2.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("Name","string");
$json->UpdateString("Scope","string");
$json->UpdateString("VendorName","string");
$json->UpdateString("VersionName","string");

# The JSON request body created by the above code:

# {
#   "Name": "string",
#   "Scope": "string",
#   "VendorName": "string",
#   "VersionName": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","AWSWAF_20190729.DescribeManagedRuleGroup");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$Capacity = $jResp->IntOf("Capacity");
$LabelNamespace = $jResp->stringOf("LabelNamespace");
$SnsTopicArn = $jResp->stringOf("SnsTopicArn");
$VersionName = $jResp->stringOf("VersionName");
$i = 0;
$count_i = $jResp->SizeOfArray("AvailableLabels");
while ($i < $count_i) {
    $jResp->put_I($i);
    $Name = $jResp->stringOf("AvailableLabels[i].Name");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("ConsumedLabels");
while ($i < $count_i) {
    $jResp->put_I($i);
    $Name = $jResp->stringOf("ConsumedLabels[i].Name");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("Rules");
while ($i < $count_i) {
    $jResp->put_I($i);
    $CustomResponseBodyKey = $jResp->stringOf("Rules[i].Action.Block.CustomResponse.CustomResponseBodyKey");
    $ResponseCode = $jResp->IntOf("Rules[i].Action.Block.CustomResponse.ResponseCode");
    $Name = $jResp->stringOf("Rules[i].Name");
    $j = 0;
    $count_j = $jResp->SizeOfArray("Rules[i].Action.Allow.CustomRequestHandling.InsertHeaders");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Name = $jResp->stringOf("Rules[i].Action.Allow.CustomRequestHandling.InsertHeaders[j].Name");
        $Value = $jResp->stringOf("Rules[i].Action.Allow.CustomRequestHandling.InsertHeaders[j].Value");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Rules[i].Action.Block.CustomResponse.ResponseHeaders");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Name = $jResp->stringOf("Rules[i].Action.Block.CustomResponse.ResponseHeaders[j].Name");
        $Value = $jResp->stringOf("Rules[i].Action.Block.CustomResponse.ResponseHeaders[j].Value");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Rules[i].Action.Captcha.CustomRequestHandling.InsertHeaders");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Name = $jResp->stringOf("Rules[i].Action.Captcha.CustomRequestHandling.InsertHeaders[j].Name");
        $Value = $jResp->stringOf("Rules[i].Action.Captcha.CustomRequestHandling.InsertHeaders[j].Value");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Rules[i].Action.Count.CustomRequestHandling.InsertHeaders");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Name = $jResp->stringOf("Rules[i].Action.Count.CustomRequestHandling.InsertHeaders[j].Name");
        $Value = $jResp->stringOf("Rules[i].Action.Count.CustomRequestHandling.InsertHeaders[j].Value");
        $j = $j + 1;
    }

    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "AvailableLabels": [
#     {
#       "Name": "string"
#     }
#   ],
#   "Capacity": number,
#   "ConsumedLabels": [
#     {
#       "Name": "string"
#     }
#   ],
#   "LabelNamespace": "string",
#   "Rules": [
#     {
#       "Action": {
#         "Allow": {
#           "CustomRequestHandling": {
#             "InsertHeaders": [
#               {
#                 "Name": "string",
#                 "Value": "string"
#               }
#             ]
#           }
#         },
#         "Block": {
#           "CustomResponse": {
#             "CustomResponseBodyKey": "string",
#             "ResponseCode": number,
#             "ResponseHeaders": [
#               {
#                 "Name": "string",
#                 "Value": "string"
#               }
#             ]
#           }
#         },
#         "Captcha": {
#           "CustomRequestHandling": {
#             "InsertHeaders": [
#               {
#                 "Name": "string",
#                 "Value": "string"
#               }
#             ]
#           }
#         },
#         "Count": {
#           "CustomRequestHandling": {
#             "InsertHeaders": [
#               {
#                 "Name": "string",
#                 "Value": "string"
#               }
#             ]
#           }
#         }
#       },
#       "Name": "string"
#     }
#   ],
#   "SnsTopicArn": "string",
#   "VersionName": "string"
# }