Chilkat Online Tools

StartMaintenance Perl Example

AWS OpsWorks CM

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("opsworks-cm");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://opsworks-cm.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("opsworks-cm.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("EngineAttributes[0].Name","string");
$json->UpdateString("EngineAttributes[0].Value","string");
$json->UpdateString("ServerName","string");

# The JSON request body created by the above code:

# {
#   "EngineAttributes": [
#     {
#       "Name": "string",
#       "Value": "string"
#     }
#   ],
#   "ServerName": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","OpsWorksCM_V2016_11_01.StartMaintenance");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$AssociatePublicIpAddress = $jResp->IntOf("Server.AssociatePublicIpAddress");
$BackupRetentionCount = $jResp->IntOf("Server.BackupRetentionCount");
$CloudFormationStackArn = $jResp->stringOf("Server.CloudFormationStackArn");
$CreatedAt = $jResp->IntOf("Server.CreatedAt");
$CustomDomain = $jResp->stringOf("Server.CustomDomain");
$DisableAutomatedBackup = $jResp->IntOf("Server.DisableAutomatedBackup");
$Endpoint = $jResp->stringOf("Server.Endpoint");
$Engine = $jResp->stringOf("Server.Engine");
$EngineModel = $jResp->stringOf("Server.EngineModel");
$EngineVersion = $jResp->stringOf("Server.EngineVersion");
$InstanceProfileArn = $jResp->stringOf("Server.InstanceProfileArn");
$InstanceType = $jResp->stringOf("Server.InstanceType");
$KeyPair = $jResp->stringOf("Server.KeyPair");
$MaintenanceStatus = $jResp->stringOf("Server.MaintenanceStatus");
$PreferredBackupWindow = $jResp->stringOf("Server.PreferredBackupWindow");
$PreferredMaintenanceWindow = $jResp->stringOf("Server.PreferredMaintenanceWindow");
$ServerArn = $jResp->stringOf("Server.ServerArn");
$ServerName = $jResp->stringOf("Server.ServerName");
$ServiceRoleArn = $jResp->stringOf("Server.ServiceRoleArn");
$Status = $jResp->stringOf("Server.Status");
$StatusReason = $jResp->stringOf("Server.StatusReason");
$i = 0;
$count_i = $jResp->SizeOfArray("Server.EngineAttributes");
while ($i < $count_i) {
    $jResp->put_I($i);
    $Name = $jResp->stringOf("Server.EngineAttributes[i].Name");
    $Value = $jResp->stringOf("Server.EngineAttributes[i].Value");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("Server.SecurityGroupIds");
while ($i < $count_i) {
    $jResp->put_I($i);
    $strVal = $jResp->stringOf("Server.SecurityGroupIds[i]");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("Server.SubnetIds");
while ($i < $count_i) {
    $jResp->put_I($i);
    $strVal = $jResp->stringOf("Server.SubnetIds[i]");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "Server": {
#     "AssociatePublicIpAddress": boolean,
#     "BackupRetentionCount": number,
#     "CloudFormationStackArn": "string",
#     "CreatedAt": number,
#     "CustomDomain": "string",
#     "DisableAutomatedBackup": boolean,
#     "Endpoint": "string",
#     "Engine": "string",
#     "EngineAttributes": [
#       {
#         "Name": "string",
#         "Value": "string"
#       }
#     ],
#     "EngineModel": "string",
#     "EngineVersion": "string",
#     "InstanceProfileArn": "string",
#     "InstanceType": "string",
#     "KeyPair": "string",
#     "MaintenanceStatus": "string",
#     "PreferredBackupWindow": "string",
#     "PreferredMaintenanceWindow": "string",
#     "SecurityGroupIds": [
#       "string"
#     ],
#     "ServerArn": "string",
#     "ServerName": "string",
#     "ServiceRoleArn": "string",
#     "Status": "string",
#     "StatusReason": "string",
#     "SubnetIds": [
#       "string"
#     ]
#   }
# }