DescribeLayers Perl Example
use chilkat();
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
$rest = chilkat::CkRest->new();
$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("opsworks");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
# URL: https://opsworks.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("opsworks.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
print $rest->lastErrorText() . "\r\n";
exit;
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
$json = chilkat::CkJsonObject->new();
$json->UpdateString("LayerIds[0]","string");
$json->UpdateString("StackId","string");
# The JSON request body created by the above code:
# {
# "LayerIds": [
# "string"
# ],
# "StackId": "string"
# }
$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","OpsWorks_20130218.DescribeLayers");
$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->lastErrorText() . "\r\n";
exit;
}
$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
print "Response Header:" . "\r\n";
print $rest->responseHeader() . "\r\n";
print "Response Body:" . "\r\n";
print $sbResponseBody->getAsString() . "\r\n";
exit;
}
$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
$i = 0;
$count_i = $jResp->SizeOfArray("Layers");
while ($i < $count_i) {
$jResp->put_I($i);
$Arn = $jResp->stringOf("Layers[i].Arn");
$v_String = $jResp->stringOf("Layers[i].Attributes.string");
$AutoAssignElasticIps = $jResp->IntOf("Layers[i].AutoAssignElasticIps");
$AutoAssignPublicIps = $jResp->IntOf("Layers[i].AutoAssignPublicIps");
$Enabled = $jResp->IntOf("Layers[i].CloudWatchLogsConfiguration.Enabled");
$CreatedAt = $jResp->stringOf("Layers[i].CreatedAt");
$CustomInstanceProfileArn = $jResp->stringOf("Layers[i].CustomInstanceProfileArn");
$CustomJson = $jResp->stringOf("Layers[i].CustomJson");
$EnableAutoHealing = $jResp->IntOf("Layers[i].EnableAutoHealing");
$InstallUpdatesOnBoot = $jResp->IntOf("Layers[i].InstallUpdatesOnBoot");
$LayerId = $jResp->stringOf("Layers[i].LayerId");
$DelayUntilElbConnectionsDrained = $jResp->IntOf("Layers[i].LifecycleEventConfiguration.Shutdown.DelayUntilElbConnectionsDrained");
$ExecutionTimeout = $jResp->IntOf("Layers[i].LifecycleEventConfiguration.Shutdown.ExecutionTimeout");
$Name = $jResp->stringOf("Layers[i].Name");
$Shortname = $jResp->stringOf("Layers[i].Shortname");
$StackId = $jResp->stringOf("Layers[i].StackId");
$v_Type = $jResp->stringOf("Layers[i].Type");
$UseEbsOptimizedInstances = $jResp->IntOf("Layers[i].UseEbsOptimizedInstances");
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CloudWatchLogsConfiguration.LogStreams");
while ($j < $count_j) {
$jResp->put_J($j);
$BatchCount = $jResp->IntOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BatchCount");
$BatchSize = $jResp->IntOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BatchSize");
$BufferDuration = $jResp->IntOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].BufferDuration");
$DatetimeFormat = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].DatetimeFormat");
$Encoding = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].Encoding");
$File = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].File");
$FileFingerprintLines = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].FileFingerprintLines");
$InitialPosition = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].InitialPosition");
$LogGroupName = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].LogGroupName");
$MultiLineStartPattern = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].MultiLineStartPattern");
$TimeZone = $jResp->stringOf("Layers[i].CloudWatchLogsConfiguration.LogStreams[j].TimeZone");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomRecipes.Configure");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomRecipes.Configure[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomRecipes.Deploy");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomRecipes.Deploy[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomRecipes.Setup");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomRecipes.Setup[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomRecipes.Shutdown");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomRecipes.Shutdown[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomRecipes.Undeploy");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomRecipes.Undeploy[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].CustomSecurityGroupIds");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].CustomSecurityGroupIds[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultRecipes.Configure");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultRecipes.Configure[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultRecipes.Deploy");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultRecipes.Deploy[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultRecipes.Setup");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultRecipes.Setup[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultRecipes.Shutdown");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultRecipes.Shutdown[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultRecipes.Undeploy");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultRecipes.Undeploy[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].DefaultSecurityGroupNames");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].DefaultSecurityGroupNames[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].Packages");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("Layers[i].Packages[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("Layers[i].VolumeConfigurations");
while ($j < $count_j) {
$jResp->put_J($j);
$Encrypted = $jResp->IntOf("Layers[i].VolumeConfigurations[j].Encrypted");
$Iops = $jResp->IntOf("Layers[i].VolumeConfigurations[j].Iops");
$MountPoint = $jResp->stringOf("Layers[i].VolumeConfigurations[j].MountPoint");
$NumberOfDisks = $jResp->IntOf("Layers[i].VolumeConfigurations[j].NumberOfDisks");
$RaidLevel = $jResp->IntOf("Layers[i].VolumeConfigurations[j].RaidLevel");
$Size = $jResp->IntOf("Layers[i].VolumeConfigurations[j].Size");
$VolumeType = $jResp->stringOf("Layers[i].VolumeConfigurations[j].VolumeType");
$j = $j + 1;
}
$i = $i + 1;
}
# A sample JSON response body parsed by the above code:
# {
# "Layers": [
# {
# "Arn": "string",
# "Attributes": {
# "string": "string"
# },
# "AutoAssignElasticIps": boolean,
# "AutoAssignPublicIps": boolean,
# "CloudWatchLogsConfiguration": {
# "Enabled": boolean,
# "LogStreams": [
# {
# "BatchCount": number,
# "BatchSize": number,
# "BufferDuration": number,
# "DatetimeFormat": "string",
# "Encoding": "string",
# "File": "string",
# "FileFingerprintLines": "string",
# "InitialPosition": "string",
# "LogGroupName": "string",
# "MultiLineStartPattern": "string",
# "TimeZone": "string"
# }
# ]
# },
# "CreatedAt": "string",
# "CustomInstanceProfileArn": "string",
# "CustomJson": "string",
# "CustomRecipes": {
# "Configure": [
# "string"
# ],
# "Deploy": [
# "string"
# ],
# "Setup": [
# "string"
# ],
# "Shutdown": [
# "string"
# ],
# "Undeploy": [
# "string"
# ]
# },
# "CustomSecurityGroupIds": [
# "string"
# ],
# "DefaultRecipes": {
# "Configure": [
# "string"
# ],
# "Deploy": [
# "string"
# ],
# "Setup": [
# "string"
# ],
# "Shutdown": [
# "string"
# ],
# "Undeploy": [
# "string"
# ]
# },
# "DefaultSecurityGroupNames": [
# "string"
# ],
# "EnableAutoHealing": boolean,
# "InstallUpdatesOnBoot": boolean,
# "LayerId": "string",
# "LifecycleEventConfiguration": {
# "Shutdown": {
# "DelayUntilElbConnectionsDrained": boolean,
# "ExecutionTimeout": number
# }
# },
# "Name": "string",
# "Packages": [
# "string"
# ],
# "Shortname": "string",
# "StackId": "string",
# "Type": "string",
# "UseEbsOptimizedInstances": boolean,
# "VolumeConfigurations": [
# {
# "Encrypted": boolean,
# "Iops": number,
# "MountPoint": "string",
# "NumberOfDisks": number,
# "RaidLevel": number,
# "Size": number,
# "VolumeType": "string"
# }
# ]
# }
# ]
# }
