Chilkat Online Tools

UpdateVirtualInterfaceAttributes Perl Example

AWS Direct Connect

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("directconnect");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://directconnect.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("directconnect.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateInt("enableSiteLink",123);
$json->UpdateInt("mtu",123);
$json->UpdateString("virtualInterfaceId","string");
$json->UpdateString("virtualInterfaceName","string");

# The JSON request body created by the above code:

# {
#   "enableSiteLink": boolean,
#   "mtu": number,
#   "virtualInterfaceId": "string",
#   "virtualInterfaceName": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","OvertureService.UpdateVirtualInterfaceAttributes");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$addressFamily = $jResp->stringOf("addressFamily");
$amazonAddress = $jResp->stringOf("amazonAddress");
$amazonSideAsn = $jResp->IntOf("amazonSideAsn");
$asn = $jResp->IntOf("asn");
$authKey = $jResp->stringOf("authKey");
$awsDeviceV2 = $jResp->stringOf("awsDeviceV2");
$awsLogicalDeviceId = $jResp->stringOf("awsLogicalDeviceId");
$connectionId = $jResp->stringOf("connectionId");
$customerAddress = $jResp->stringOf("customerAddress");
$customerRouterConfig = $jResp->stringOf("customerRouterConfig");
$directConnectGatewayId = $jResp->stringOf("directConnectGatewayId");
$jumboFrameCapable = $jResp->IntOf("jumboFrameCapable");
$location = $jResp->stringOf("location");
$mtu = $jResp->IntOf("mtu");
$ownerAccount = $jResp->stringOf("ownerAccount");
$region = $jResp->stringOf("region");
$siteLinkEnabled = $jResp->IntOf("siteLinkEnabled");
$virtualGatewayId = $jResp->stringOf("virtualGatewayId");
$virtualInterfaceId = $jResp->stringOf("virtualInterfaceId");
$virtualInterfaceName = $jResp->stringOf("virtualInterfaceName");
$virtualInterfaceState = $jResp->stringOf("virtualInterfaceState");
$virtualInterfaceType = $jResp->stringOf("virtualInterfaceType");
$vlan = $jResp->IntOf("vlan");
$i = 0;
$count_i = $jResp->SizeOfArray("bgpPeers");
while ($i < $count_i) {
    $jResp->put_I($i);
    $addressFamily = $jResp->stringOf("bgpPeers[i].addressFamily");
    $amazonAddress = $jResp->stringOf("bgpPeers[i].amazonAddress");
    $asn = $jResp->IntOf("bgpPeers[i].asn");
    $authKey = $jResp->stringOf("bgpPeers[i].authKey");
    $awsDeviceV2 = $jResp->stringOf("bgpPeers[i].awsDeviceV2");
    $awsLogicalDeviceId = $jResp->stringOf("bgpPeers[i].awsLogicalDeviceId");
    $bgpPeerId = $jResp->stringOf("bgpPeers[i].bgpPeerId");
    $bgpPeerState = $jResp->stringOf("bgpPeers[i].bgpPeerState");
    $bgpStatus = $jResp->stringOf("bgpPeers[i].bgpStatus");
    $customerAddress = $jResp->stringOf("bgpPeers[i].customerAddress");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("routeFilterPrefixes");
while ($i < $count_i) {
    $jResp->put_I($i);
    $cidr = $jResp->stringOf("routeFilterPrefixes[i].cidr");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("tags");
while ($i < $count_i) {
    $jResp->put_I($i);
    $key = $jResp->stringOf("tags[i].key");
    $value = $jResp->stringOf("tags[i].value");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "addressFamily": "string",
#   "amazonAddress": "string",
#   "amazonSideAsn": number,
#   "asn": number,
#   "authKey": "string",
#   "awsDeviceV2": "string",
#   "awsLogicalDeviceId": "string",
#   "bgpPeers": [
#     {
#       "addressFamily": "string",
#       "amazonAddress": "string",
#       "asn": number,
#       "authKey": "string",
#       "awsDeviceV2": "string",
#       "awsLogicalDeviceId": "string",
#       "bgpPeerId": "string",
#       "bgpPeerState": "string",
#       "bgpStatus": "string",
#       "customerAddress": "string"
#     }
#   ],
#   "connectionId": "string",
#   "customerAddress": "string",
#   "customerRouterConfig": "string",
#   "directConnectGatewayId": "string",
#   "jumboFrameCapable": boolean,
#   "location": "string",
#   "mtu": number,
#   "ownerAccount": "string",
#   "region": "string",
#   "routeFilterPrefixes": [
#     {
#       "cidr": "string"
#     }
#   ],
#   "siteLinkEnabled": boolean,
#   "tags": [
#     {
#       "key": "string",
#       "value": "string"
#     }
#   ],
#   "virtualGatewayId": "string",
#   "virtualInterfaceId": "string",
#   "virtualInterfaceName": "string",
#   "virtualInterfaceState": "string",
#   "virtualInterfaceType": "string",
#   "vlan": number
# }