DeleteLag Perl Example
use chilkat();
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
$rest = chilkat::CkRest->new();
$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("directconnect");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
# URL: https://directconnect.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("directconnect.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
print $rest->lastErrorText() . "\r\n";
exit;
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
$json = chilkat::CkJsonObject->new();
$json->UpdateString("lagId","string");
# The JSON request body created by the above code:
# {
# "lagId": "string"
# }
$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","OvertureService.DeleteLag");
$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->lastErrorText() . "\r\n";
exit;
}
$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
print "Response Header:" . "\r\n";
print $rest->responseHeader() . "\r\n";
print "Response Body:" . "\r\n";
print $sbResponseBody->getAsString() . "\r\n";
exit;
}
$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
$allowsHostedConnections = $jResp->IntOf("allowsHostedConnections");
$awsDevice = $jResp->stringOf("awsDevice");
$awsDeviceV2 = $jResp->stringOf("awsDeviceV2");
$awsLogicalDeviceId = $jResp->stringOf("awsLogicalDeviceId");
$connectionsBandwidth = $jResp->stringOf("connectionsBandwidth");
$encryptionMode = $jResp->stringOf("encryptionMode");
$hasLogicalRedundancy = $jResp->stringOf("hasLogicalRedundancy");
$jumboFrameCapable = $jResp->IntOf("jumboFrameCapable");
$lagId = $jResp->stringOf("lagId");
$lagName = $jResp->stringOf("lagName");
$lagState = $jResp->stringOf("lagState");
$location = $jResp->stringOf("location");
$macSecCapable = $jResp->IntOf("macSecCapable");
$minimumLinks = $jResp->IntOf("minimumLinks");
$numberOfConnections = $jResp->IntOf("numberOfConnections");
$ownerAccount = $jResp->stringOf("ownerAccount");
$providerName = $jResp->stringOf("providerName");
$region = $jResp->stringOf("region");
$i = 0;
$count_i = $jResp->SizeOfArray("connections");
while ($i < $count_i) {
$jResp->put_I($i);
$awsDevice = $jResp->stringOf("connections[i].awsDevice");
$awsDeviceV2 = $jResp->stringOf("connections[i].awsDeviceV2");
$awsLogicalDeviceId = $jResp->stringOf("connections[i].awsLogicalDeviceId");
$bandwidth = $jResp->stringOf("connections[i].bandwidth");
$connectionId = $jResp->stringOf("connections[i].connectionId");
$connectionName = $jResp->stringOf("connections[i].connectionName");
$connectionState = $jResp->stringOf("connections[i].connectionState");
$encryptionMode = $jResp->stringOf("connections[i].encryptionMode");
$hasLogicalRedundancy = $jResp->stringOf("connections[i].hasLogicalRedundancy");
$jumboFrameCapable = $jResp->IntOf("connections[i].jumboFrameCapable");
$lagId = $jResp->stringOf("connections[i].lagId");
$loaIssueTime = $jResp->IntOf("connections[i].loaIssueTime");
$location = $jResp->stringOf("connections[i].location");
$macSecCapable = $jResp->IntOf("connections[i].macSecCapable");
$ownerAccount = $jResp->stringOf("connections[i].ownerAccount");
$partnerName = $jResp->stringOf("connections[i].partnerName");
$portEncryptionStatus = $jResp->stringOf("connections[i].portEncryptionStatus");
$providerName = $jResp->stringOf("connections[i].providerName");
$region = $jResp->stringOf("connections[i].region");
$vlan = $jResp->IntOf("connections[i].vlan");
$j = 0;
$count_j = $jResp->SizeOfArray("connections[i].macSecKeys");
while ($j < $count_j) {
$jResp->put_J($j);
$ckn = $jResp->stringOf("connections[i].macSecKeys[j].ckn");
$secretARN = $jResp->stringOf("connections[i].macSecKeys[j].secretARN");
$startOn = $jResp->stringOf("connections[i].macSecKeys[j].startOn");
$state = $jResp->stringOf("connections[i].macSecKeys[j].state");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("connections[i].tags");
while ($j < $count_j) {
$jResp->put_J($j);
$key = $jResp->stringOf("connections[i].tags[j].key");
$value = $jResp->stringOf("connections[i].tags[j].value");
$j = $j + 1;
}
$i = $i + 1;
}
$i = 0;
$count_i = $jResp->SizeOfArray("macSecKeys");
while ($i < $count_i) {
$jResp->put_I($i);
$ckn = $jResp->stringOf("macSecKeys[i].ckn");
$secretARN = $jResp->stringOf("macSecKeys[i].secretARN");
$startOn = $jResp->stringOf("macSecKeys[i].startOn");
$state = $jResp->stringOf("macSecKeys[i].state");
$i = $i + 1;
}
$i = 0;
$count_i = $jResp->SizeOfArray("tags");
while ($i < $count_i) {
$jResp->put_I($i);
$key = $jResp->stringOf("tags[i].key");
$value = $jResp->stringOf("tags[i].value");
$i = $i + 1;
}
# A sample JSON response body parsed by the above code:
# {
# "allowsHostedConnections": boolean,
# "awsDevice": "string",
# "awsDeviceV2": "string",
# "awsLogicalDeviceId": "string",
# "connections": [
# {
# "awsDevice": "string",
# "awsDeviceV2": "string",
# "awsLogicalDeviceId": "string",
# "bandwidth": "string",
# "connectionId": "string",
# "connectionName": "string",
# "connectionState": "string",
# "encryptionMode": "string",
# "hasLogicalRedundancy": "string",
# "jumboFrameCapable": boolean,
# "lagId": "string",
# "loaIssueTime": number,
# "location": "string",
# "macSecCapable": boolean,
# "macSecKeys": [
# {
# "ckn": "string",
# "secretARN": "string",
# "startOn": "string",
# "state": "string"
# }
# ],
# "ownerAccount": "string",
# "partnerName": "string",
# "portEncryptionStatus": "string",
# "providerName": "string",
# "region": "string",
# "tags": [
# {
# "key": "string",
# "value": "string"
# }
# ],
# "vlan": number
# }
# ],
# "connectionsBandwidth": "string",
# "encryptionMode": "string",
# "hasLogicalRedundancy": "string",
# "jumboFrameCapable": boolean,
# "lagId": "string",
# "lagName": "string",
# "lagState": "string",
# "location": "string",
# "macSecCapable": boolean,
# "macSecKeys": [
# {
# "ckn": "string",
# "secretARN": "string",
# "startOn": "string",
# "state": "string"
# }
# ],
# "minimumLinks": number,
# "numberOfConnections": number,
# "ownerAccount": "string",
# "providerName": "string",
# "region": "string",
# "tags": [
# {
# "key": "string",
# "value": "string"
# }
# ]
# }
