GetRemoteAccessSession Perl Example
use chilkat();
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
$rest = chilkat::CkRest->new();
$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("devicefarm");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);
# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("devicefarm.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
print $rest->lastErrorText() . "\r\n";
exit;
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
$json = chilkat::CkJsonObject->new();
$json->UpdateString("arn","string");
# The JSON request body created by the above code:
# {
# "arn": "string"
# }
$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","DeviceFarm_20150623.GetRemoteAccessSession");
$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
print $rest->lastErrorText() . "\r\n";
exit;
}
$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
print "Response Header:" . "\r\n";
print $rest->responseHeader() . "\r\n";
print "Response Body:" . "\r\n";
print $sbResponseBody->getAsString() . "\r\n";
exit;
}
$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
$Arn = $jResp->stringOf("remoteAccessSession.arn");
$BillingMethod = $jResp->stringOf("remoteAccessSession.billingMethod");
$ClientId = $jResp->stringOf("remoteAccessSession.clientId");
$Created = $jResp->IntOf("remoteAccessSession.created");
$DeviceArn = $jResp->stringOf("remoteAccessSession.device.arn");
$Availability = $jResp->stringOf("remoteAccessSession.device.availability");
$Carrier = $jResp->stringOf("remoteAccessSession.device.carrier");
$Architecture = $jResp->stringOf("remoteAccessSession.device.cpu.architecture");
$Clock = $jResp->IntOf("remoteAccessSession.device.cpu.clock");
$Frequency = $jResp->stringOf("remoteAccessSession.device.cpu.frequency");
$FleetName = $jResp->stringOf("remoteAccessSession.device.fleetName");
$FleetType = $jResp->stringOf("remoteAccessSession.device.fleetType");
$FormFactor = $jResp->stringOf("remoteAccessSession.device.formFactor");
$HeapSize = $jResp->IntOf("remoteAccessSession.device.heapSize");
$Image = $jResp->stringOf("remoteAccessSession.device.image");
$Manufacturer = $jResp->stringOf("remoteAccessSession.device.manufacturer");
$Memory = $jResp->IntOf("remoteAccessSession.device.memory");
$Model = $jResp->stringOf("remoteAccessSession.device.model");
$ModelId = $jResp->stringOf("remoteAccessSession.device.modelId");
$Name = $jResp->stringOf("remoteAccessSession.device.name");
$Os = $jResp->stringOf("remoteAccessSession.device.os");
$Platform = $jResp->stringOf("remoteAccessSession.device.platform");
$Radio = $jResp->stringOf("remoteAccessSession.device.radio");
$RemoteAccessEnabled = $jResp->IntOf("remoteAccessSession.device.remoteAccessEnabled");
$RemoteDebugEnabled = $jResp->IntOf("remoteAccessSession.device.remoteDebugEnabled");
$Height = $jResp->IntOf("remoteAccessSession.device.resolution.height");
$Width = $jResp->IntOf("remoteAccessSession.device.resolution.width");
$Metered = $jResp->IntOf("remoteAccessSession.deviceMinutes.metered");
$Total = $jResp->IntOf("remoteAccessSession.deviceMinutes.total");
$Unmetered = $jResp->IntOf("remoteAccessSession.deviceMinutes.unmetered");
$DeviceUdid = $jResp->stringOf("remoteAccessSession.deviceUdid");
$Endpoint = $jResp->stringOf("remoteAccessSession.endpoint");
$HostAddress = $jResp->stringOf("remoteAccessSession.hostAddress");
$InstanceArn = $jResp->stringOf("remoteAccessSession.instanceArn");
$InteractionMode = $jResp->stringOf("remoteAccessSession.interactionMode");
$Message = $jResp->stringOf("remoteAccessSession.message");
$remoteAccessSessionName = $jResp->stringOf("remoteAccessSession.name");
$remoteAccessSessionRemoteDebugEnabled = $jResp->IntOf("remoteAccessSession.remoteDebugEnabled");
$RemoteRecordAppArn = $jResp->stringOf("remoteAccessSession.remoteRecordAppArn");
$RemoteRecordEnabled = $jResp->IntOf("remoteAccessSession.remoteRecordEnabled");
$Result = $jResp->stringOf("remoteAccessSession.result");
$SkipAppResign = $jResp->IntOf("remoteAccessSession.skipAppResign");
$Started = $jResp->IntOf("remoteAccessSession.started");
$Status = $jResp->stringOf("remoteAccessSession.status");
$Stopped = $jResp->IntOf("remoteAccessSession.stopped");
$i = 0;
$count_i = $jResp->SizeOfArray("remoteAccessSession.device.instances");
while ($i < $count_i) {
$jResp->put_I($i);
$arn = $jResp->stringOf("remoteAccessSession.device.instances[i].arn");
$deviceArn = $jResp->stringOf("remoteAccessSession.device.instances[i].deviceArn");
$instanceProfileArn = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.arn");
$Description = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.description");
$instanceProfileName = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.name");
$PackageCleanup = $jResp->IntOf("remoteAccessSession.device.instances[i].instanceProfile.packageCleanup");
$RebootAfterUse = $jResp->IntOf("remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse");
$status = $jResp->stringOf("remoteAccessSession.device.instances[i].status");
$udid = $jResp->stringOf("remoteAccessSession.device.instances[i].udid");
$j = 0;
$count_j = $jResp->SizeOfArray("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]");
$j = $j + 1;
}
$j = 0;
$count_j = $jResp->SizeOfArray("remoteAccessSession.device.instances[i].labels");
while ($j < $count_j) {
$jResp->put_J($j);
$strVal = $jResp->stringOf("remoteAccessSession.device.instances[i].labels[j]");
$j = $j + 1;
}
$i = $i + 1;
}
# A sample JSON response body parsed by the above code:
# {
# "remoteAccessSession": {
# "arn": "string",
# "billingMethod": "string",
# "clientId": "string",
# "created": number,
# "device": {
# "arn": "string",
# "availability": "string",
# "carrier": "string",
# "cpu": {
# "architecture": "string",
# "clock": number,
# "frequency": "string"
# },
# "fleetName": "string",
# "fleetType": "string",
# "formFactor": "string",
# "heapSize": number,
# "image": "string",
# "instances": [
# {
# "arn": "string",
# "deviceArn": "string",
# "instanceProfile": {
# "arn": "string",
# "description": "string",
# "excludeAppPackagesFromCleanup": [
# "string"
# ],
# "name": "string",
# "packageCleanup": boolean,
# "rebootAfterUse": boolean
# },
# "labels": [
# "string"
# ],
# "status": "string",
# "udid": "string"
# }
# ],
# "manufacturer": "string",
# "memory": number,
# "model": "string",
# "modelId": "string",
# "name": "string",
# "os": "string",
# "platform": "string",
# "radio": "string",
# "remoteAccessEnabled": boolean,
# "remoteDebugEnabled": boolean,
# "resolution": {
# "height": number,
# "width": number
# }
# },
# "deviceMinutes": {
# "metered": number,
# "total": number,
# "unmetered": number
# },
# "deviceUdid": "string",
# "endpoint": "string",
# "hostAddress": "string",
# "instanceArn": "string",
# "interactionMode": "string",
# "message": "string",
# "name": "string",
# "remoteDebugEnabled": boolean,
# "remoteRecordAppArn": "string",
# "remoteRecordEnabled": boolean,
# "result": "string",
# "skipAppResign": boolean,
# "started": number,
# "status": "string",
# "stopped": number
# }
# }
