Chilkat Online Tools

CreateRemoteAccessSession Perl Example

AWS Device Farm

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("devicefarm");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://devicefarm.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("devicefarm.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("clientId","string");
$json->UpdateString("configuration.billingMethod","string");
$json->UpdateString("configuration.vpceConfigurationArns[0]","string");
$json->UpdateString("deviceArn","string");
$json->UpdateString("instanceArn","string");
$json->UpdateString("interactionMode","string");
$json->UpdateString("name","string");
$json->UpdateString("projectArn","string");
$json->UpdateInt("remoteDebugEnabled",123);
$json->UpdateString("remoteRecordAppArn","string");
$json->UpdateInt("remoteRecordEnabled",123);
$json->UpdateInt("skipAppResign",123);
$json->UpdateString("sshPublicKey","string");

# The JSON request body created by the above code:

# {
#   "clientId": "string",
#   "configuration": {
#     "billingMethod": "string",
#     "vpceConfigurationArns": [
#       "string"
#     ]
#   },
#   "deviceArn": "string",
#   "instanceArn": "string",
#   "interactionMode": "string",
#   "name": "string",
#   "projectArn": "string",
#   "remoteDebugEnabled": boolean,
#   "remoteRecordAppArn": "string",
#   "remoteRecordEnabled": boolean,
#   "skipAppResign": boolean,
#   "sshPublicKey": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","DeviceFarm_20150623.CreateRemoteAccessSession");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$Arn = $jResp->stringOf("remoteAccessSession.arn");
$BillingMethod = $jResp->stringOf("remoteAccessSession.billingMethod");
$ClientId = $jResp->stringOf("remoteAccessSession.clientId");
$Created = $jResp->IntOf("remoteAccessSession.created");
$DeviceArn = $jResp->stringOf("remoteAccessSession.device.arn");
$Availability = $jResp->stringOf("remoteAccessSession.device.availability");
$Carrier = $jResp->stringOf("remoteAccessSession.device.carrier");
$Architecture = $jResp->stringOf("remoteAccessSession.device.cpu.architecture");
$Clock = $jResp->IntOf("remoteAccessSession.device.cpu.clock");
$Frequency = $jResp->stringOf("remoteAccessSession.device.cpu.frequency");
$FleetName = $jResp->stringOf("remoteAccessSession.device.fleetName");
$FleetType = $jResp->stringOf("remoteAccessSession.device.fleetType");
$FormFactor = $jResp->stringOf("remoteAccessSession.device.formFactor");
$HeapSize = $jResp->IntOf("remoteAccessSession.device.heapSize");
$Image = $jResp->stringOf("remoteAccessSession.device.image");
$Manufacturer = $jResp->stringOf("remoteAccessSession.device.manufacturer");
$Memory = $jResp->IntOf("remoteAccessSession.device.memory");
$Model = $jResp->stringOf("remoteAccessSession.device.model");
$ModelId = $jResp->stringOf("remoteAccessSession.device.modelId");
$Name = $jResp->stringOf("remoteAccessSession.device.name");
$Os = $jResp->stringOf("remoteAccessSession.device.os");
$Platform = $jResp->stringOf("remoteAccessSession.device.platform");
$Radio = $jResp->stringOf("remoteAccessSession.device.radio");
$RemoteAccessEnabled = $jResp->IntOf("remoteAccessSession.device.remoteAccessEnabled");
$RemoteDebugEnabled = $jResp->IntOf("remoteAccessSession.device.remoteDebugEnabled");
$Height = $jResp->IntOf("remoteAccessSession.device.resolution.height");
$Width = $jResp->IntOf("remoteAccessSession.device.resolution.width");
$Metered = $jResp->IntOf("remoteAccessSession.deviceMinutes.metered");
$Total = $jResp->IntOf("remoteAccessSession.deviceMinutes.total");
$Unmetered = $jResp->IntOf("remoteAccessSession.deviceMinutes.unmetered");
$DeviceUdid = $jResp->stringOf("remoteAccessSession.deviceUdid");
$Endpoint = $jResp->stringOf("remoteAccessSession.endpoint");
$HostAddress = $jResp->stringOf("remoteAccessSession.hostAddress");
$InstanceArn = $jResp->stringOf("remoteAccessSession.instanceArn");
$InteractionMode = $jResp->stringOf("remoteAccessSession.interactionMode");
$Message = $jResp->stringOf("remoteAccessSession.message");
$remoteAccessSessionName = $jResp->stringOf("remoteAccessSession.name");
$remoteAccessSessionRemoteDebugEnabled = $jResp->IntOf("remoteAccessSession.remoteDebugEnabled");
$RemoteRecordAppArn = $jResp->stringOf("remoteAccessSession.remoteRecordAppArn");
$RemoteRecordEnabled = $jResp->IntOf("remoteAccessSession.remoteRecordEnabled");
$Result = $jResp->stringOf("remoteAccessSession.result");
$SkipAppResign = $jResp->IntOf("remoteAccessSession.skipAppResign");
$Started = $jResp->IntOf("remoteAccessSession.started");
$Status = $jResp->stringOf("remoteAccessSession.status");
$Stopped = $jResp->IntOf("remoteAccessSession.stopped");
$i = 0;
$count_i = $jResp->SizeOfArray("remoteAccessSession.device.instances");
while ($i < $count_i) {
    $jResp->put_I($i);
    $arn = $jResp->stringOf("remoteAccessSession.device.instances[i].arn");
    $deviceArn = $jResp->stringOf("remoteAccessSession.device.instances[i].deviceArn");
    $instanceProfileArn = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.arn");
    $Description = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.description");
    $instanceProfileName = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.name");
    $PackageCleanup = $jResp->IntOf("remoteAccessSession.device.instances[i].instanceProfile.packageCleanup");
    $RebootAfterUse = $jResp->IntOf("remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse");
    $status = $jResp->stringOf("remoteAccessSession.device.instances[i].status");
    $udid = $jResp->stringOf("remoteAccessSession.device.instances[i].udid");
    $j = 0;
    $count_j = $jResp->SizeOfArray("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("remoteAccessSession.device.instances[i].labels");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf("remoteAccessSession.device.instances[i].labels[j]");
        $j = $j + 1;
    }

    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "remoteAccessSession": {
#     "arn": "string",
#     "billingMethod": "string",
#     "clientId": "string",
#     "created": number,
#     "device": {
#       "arn": "string",
#       "availability": "string",
#       "carrier": "string",
#       "cpu": {
#         "architecture": "string",
#         "clock": number,
#         "frequency": "string"
#       },
#       "fleetName": "string",
#       "fleetType": "string",
#       "formFactor": "string",
#       "heapSize": number,
#       "image": "string",
#       "instances": [
#         {
#           "arn": "string",
#           "deviceArn": "string",
#           "instanceProfile": {
#             "arn": "string",
#             "description": "string",
#             "excludeAppPackagesFromCleanup": [
#               "string"
#             ],
#             "name": "string",
#             "packageCleanup": boolean,
#             "rebootAfterUse": boolean
#           },
#           "labels": [
#             "string"
#           ],
#           "status": "string",
#           "udid": "string"
#         }
#       ],
#       "manufacturer": "string",
#       "memory": number,
#       "model": "string",
#       "modelId": "string",
#       "name": "string",
#       "os": "string",
#       "platform": "string",
#       "radio": "string",
#       "remoteAccessEnabled": boolean,
#       "remoteDebugEnabled": boolean,
#       "resolution": {
#         "height": number,
#         "width": number
#       }
#     },
#     "deviceMinutes": {
#       "metered": number,
#       "total": number,
#       "unmetered": number
#     },
#     "deviceUdid": "string",
#     "endpoint": "string",
#     "hostAddress": "string",
#     "instanceArn": "string",
#     "interactionMode": "string",
#     "message": "string",
#     "name": "string",
#     "remoteDebugEnabled": boolean,
#     "remoteRecordAppArn": "string",
#     "remoteRecordEnabled": boolean,
#     "result": "string",
#     "skipAppResign": boolean,
#     "started": number,
#     "status": "string",
#     "stopped": number
#   }
# }