Chilkat Online Tools

DescribeMergeConflicts Perl Example

AWS CodeCommit

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("codecommit");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://codecommit.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("codecommit.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("conflictDetailLevel","string");
$json->UpdateString("conflictResolutionStrategy","string");
$json->UpdateString("destinationCommitSpecifier","string");
$json->UpdateString("filePath","string");
$json->UpdateInt("maxMergeHunks",123);
$json->UpdateString("mergeOption","string");
$json->UpdateString("nextToken","string");
$json->UpdateString("repositoryName","string");
$json->UpdateString("sourceCommitSpecifier","string");

# The JSON request body created by the above code:

# {
#   "conflictDetailLevel": "string",
#   "conflictResolutionStrategy": "string",
#   "destinationCommitSpecifier": "string",
#   "filePath": "string",
#   "maxMergeHunks": number,
#   "mergeOption": "string",
#   "nextToken": "string",
#   "repositoryName": "string",
#   "sourceCommitSpecifier": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","CodeCommit_20150413.DescribeMergeConflicts");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$baseCommitId = $jResp->stringOf("baseCommitId");
$ContentConflict = $jResp->IntOf("conflictMetadata.contentConflict");
$FileModeConflict = $jResp->IntOf("conflictMetadata.fileModeConflict");
$Base = $jResp->stringOf("conflictMetadata.fileModes.base");
$Destination = $jResp->stringOf("conflictMetadata.fileModes.destination");
$Source = $jResp->stringOf("conflictMetadata.fileModes.source");
$FilePath = $jResp->stringOf("conflictMetadata.filePath");
$FileSizesBase = $jResp->IntOf("conflictMetadata.fileSizes.base");
$FileSizesDestination = $jResp->IntOf("conflictMetadata.fileSizes.destination");
$FileSizesSource = $jResp->IntOf("conflictMetadata.fileSizes.source");
$IsBinaryFileBase = $jResp->IntOf("conflictMetadata.isBinaryFile.base");
$IsBinaryFileDestination = $jResp->IntOf("conflictMetadata.isBinaryFile.destination");
$IsBinaryFileSource = $jResp->IntOf("conflictMetadata.isBinaryFile.source");
$MergeOperationsDestination = $jResp->stringOf("conflictMetadata.mergeOperations.destination");
$MergeOperationsSource = $jResp->stringOf("conflictMetadata.mergeOperations.source");
$NumberOfConflicts = $jResp->IntOf("conflictMetadata.numberOfConflicts");
$ObjectTypeConflict = $jResp->IntOf("conflictMetadata.objectTypeConflict");
$ObjectTypesBase = $jResp->stringOf("conflictMetadata.objectTypes.base");
$ObjectTypesDestination = $jResp->stringOf("conflictMetadata.objectTypes.destination");
$ObjectTypesSource = $jResp->stringOf("conflictMetadata.objectTypes.source");
$destinationCommitId = $jResp->stringOf("destinationCommitId");
$nextToken = $jResp->stringOf("nextToken");
$sourceCommitId = $jResp->stringOf("sourceCommitId");
$i = 0;
$count_i = $jResp->SizeOfArray("mergeHunks");
while ($i < $count_i) {
    $jResp->put_I($i);
    $EndLine = $jResp->IntOf("mergeHunks[i].base.endLine");
    $HunkContent = $jResp->stringOf("mergeHunks[i].base.hunkContent");
    $StartLine = $jResp->IntOf("mergeHunks[i].base.startLine");
    $destinationEndLine = $jResp->IntOf("mergeHunks[i].destination.endLine");
    $destinationHunkContent = $jResp->stringOf("mergeHunks[i].destination.hunkContent");
    $destinationStartLine = $jResp->IntOf("mergeHunks[i].destination.startLine");
    $isConflict = $jResp->IntOf("mergeHunks[i].isConflict");
    $sourceEndLine = $jResp->IntOf("mergeHunks[i].source.endLine");
    $sourceHunkContent = $jResp->stringOf("mergeHunks[i].source.hunkContent");
    $sourceStartLine = $jResp->IntOf("mergeHunks[i].source.startLine");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "baseCommitId": "string",
#   "conflictMetadata": {
#     "contentConflict": boolean,
#     "fileModeConflict": boolean,
#     "fileModes": {
#       "base": "string",
#       "destination": "string",
#       "source": "string"
#     },
#     "filePath": "string",
#     "fileSizes": {
#       "base": number,
#       "destination": number,
#       "source": number
#     },
#     "isBinaryFile": {
#       "base": boolean,
#       "destination": boolean,
#       "source": boolean
#     },
#     "mergeOperations": {
#       "destination": "string",
#       "source": "string"
#     },
#     "numberOfConflicts": number,
#     "objectTypeConflict": boolean,
#     "objectTypes": {
#       "base": "string",
#       "destination": "string",
#       "source": "string"
#     }
#   },
#   "destinationCommitId": "string",
#   "mergeHunks": [
#     {
#       "base": {
#         "endLine": number,
#         "hunkContent": "string",
#         "startLine": number
#       },
#       "destination": {
#         "endLine": number,
#         "hunkContent": "string",
#         "startLine": number
#       },
#       "isConflict": boolean,
#       "source": {
#         "endLine": number,
#         "hunkContent": "string",
#         "startLine": number
#       }
#     }
#   ],
#   "nextToken": "string",
#   "sourceCommitId": "string"
# }