Chilkat Online Tools

DescribeClusters Perl Example

AWS CloudHSM V2

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("cloudhsm");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://cloudhsmv2.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("cloudhsmv2.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("Filters.string[0]","string");
$json->UpdateInt("MaxResults",123);
$json->UpdateString("NextToken","string");

# The JSON request body created by the above code:

# {
#   "Filters": {
#     "string": [
#       "string"
#     ]
#   },
#   "MaxResults": number,
#   "NextToken": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","BaldrApiService.DescribeClusters");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$NextToken = $jResp->stringOf("NextToken");
$i = 0;
$count_i = $jResp->SizeOfArray("Clusters");
while ($i < $count_i) {
    $jResp->put_I($i);
    $BackupPolicy = $jResp->stringOf("Clusters[i].BackupPolicy");
    $v_Type = $jResp->stringOf("Clusters[i].BackupRetentionPolicy.Type");
    $Value = $jResp->stringOf("Clusters[i].BackupRetentionPolicy.Value");
    $AwsHardwareCertificate = $jResp->stringOf("Clusters[i].Certificates.AwsHardwareCertificate");
    $ClusterCertificate = $jResp->stringOf("Clusters[i].Certificates.ClusterCertificate");
    $ClusterCsr = $jResp->stringOf("Clusters[i].Certificates.ClusterCsr");
    $HsmCertificate = $jResp->stringOf("Clusters[i].Certificates.HsmCertificate");
    $ManufacturerHardwareCertificate = $jResp->stringOf("Clusters[i].Certificates.ManufacturerHardwareCertificate");
    $ClusterId = $jResp->stringOf("Clusters[i].ClusterId");
    $CreateTimestamp = $jResp->IntOf("Clusters[i].CreateTimestamp");
    $HsmType = $jResp->stringOf("Clusters[i].HsmType");
    $PreCoPassword = $jResp->stringOf("Clusters[i].PreCoPassword");
    $SecurityGroup = $jResp->stringOf("Clusters[i].SecurityGroup");
    $SourceBackupId = $jResp->stringOf("Clusters[i].SourceBackupId");
    $State = $jResp->stringOf("Clusters[i].State");
    $StateMessage = $jResp->stringOf("Clusters[i].StateMessage");
    $v_String = $jResp->stringOf("Clusters[i].SubnetMapping.string");
    $VpcId = $jResp->stringOf("Clusters[i].VpcId");
    $j = 0;
    $count_j = $jResp->SizeOfArray("Clusters[i].Hsms");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $AvailabilityZone = $jResp->stringOf("Clusters[i].Hsms[j].AvailabilityZone");
        $ClusterId = $jResp->stringOf("Clusters[i].Hsms[j].ClusterId");
        $EniId = $jResp->stringOf("Clusters[i].Hsms[j].EniId");
        $EniIp = $jResp->stringOf("Clusters[i].Hsms[j].EniIp");
        $HsmId = $jResp->stringOf("Clusters[i].Hsms[j].HsmId");
        $State = $jResp->stringOf("Clusters[i].Hsms[j].State");
        $StateMessage = $jResp->stringOf("Clusters[i].Hsms[j].StateMessage");
        $SubnetId = $jResp->stringOf("Clusters[i].Hsms[j].SubnetId");
        $j = $j + 1;
    }

    $j = 0;
    $count_j = $jResp->SizeOfArray("Clusters[i].TagList");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $Key = $jResp->stringOf("Clusters[i].TagList[j].Key");
        $Value = $jResp->stringOf("Clusters[i].TagList[j].Value");
        $j = $j + 1;
    }

    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "Clusters": [
#     {
#       "BackupPolicy": "string",
#       "BackupRetentionPolicy": {
#         "Type": "string",
#         "Value": "string"
#       },
#       "Certificates": {
#         "AwsHardwareCertificate": "string",
#         "ClusterCertificate": "string",
#         "ClusterCsr": "string",
#         "HsmCertificate": "string",
#         "ManufacturerHardwareCertificate": "string"
#       },
#       "ClusterId": "string",
#       "CreateTimestamp": number,
#       "Hsms": [
#         {
#           "AvailabilityZone": "string",
#           "ClusterId": "string",
#           "EniId": "string",
#           "EniIp": "string",
#           "HsmId": "string",
#           "State": "string",
#           "StateMessage": "string",
#           "SubnetId": "string"
#         }
#       ],
#       "HsmType": "string",
#       "PreCoPassword": "string",
#       "SecurityGroup": "string",
#       "SourceBackupId": "string",
#       "State": "string",
#       "StateMessage": "string",
#       "SubnetMapping": {
#         "string": "string"
#       },
#       "TagList": [
#         {
#           "Key": "string",
#           "Value": "string"
#         }
#       ],
#       "VpcId": "string"
#     }
#   ],
#   "NextToken": "string"
# }