Chilkat Online Tools

DeleteCluster Perl Example

AWS CloudHSM V2

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("cloudhsm");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://cloudhsmv2.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("cloudhsmv2.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("ClusterId","string");

# The JSON request body created by the above code:

# {
#   "ClusterId": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","BaldrApiService.DeleteCluster");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$BackupPolicy = $jResp->stringOf("Cluster.BackupPolicy");
$v_Type = $jResp->stringOf("Cluster.BackupRetentionPolicy.Type");
$Value = $jResp->stringOf("Cluster.BackupRetentionPolicy.Value");
$AwsHardwareCertificate = $jResp->stringOf("Cluster.Certificates.AwsHardwareCertificate");
$ClusterCertificate = $jResp->stringOf("Cluster.Certificates.ClusterCertificate");
$ClusterCsr = $jResp->stringOf("Cluster.Certificates.ClusterCsr");
$HsmCertificate = $jResp->stringOf("Cluster.Certificates.HsmCertificate");
$ManufacturerHardwareCertificate = $jResp->stringOf("Cluster.Certificates.ManufacturerHardwareCertificate");
$ClusterId = $jResp->stringOf("Cluster.ClusterId");
$CreateTimestamp = $jResp->IntOf("Cluster.CreateTimestamp");
$HsmType = $jResp->stringOf("Cluster.HsmType");
$PreCoPassword = $jResp->stringOf("Cluster.PreCoPassword");
$SecurityGroup = $jResp->stringOf("Cluster.SecurityGroup");
$SourceBackupId = $jResp->stringOf("Cluster.SourceBackupId");
$State = $jResp->stringOf("Cluster.State");
$StateMessage = $jResp->stringOf("Cluster.StateMessage");
$v_String = $jResp->stringOf("Cluster.SubnetMapping.string");
$VpcId = $jResp->stringOf("Cluster.VpcId");
$i = 0;
$count_i = $jResp->SizeOfArray("Cluster.Hsms");
while ($i < $count_i) {
    $jResp->put_I($i);
    $AvailabilityZone = $jResp->stringOf("Cluster.Hsms[i].AvailabilityZone");
    $ClusterId = $jResp->stringOf("Cluster.Hsms[i].ClusterId");
    $EniId = $jResp->stringOf("Cluster.Hsms[i].EniId");
    $EniIp = $jResp->stringOf("Cluster.Hsms[i].EniIp");
    $HsmId = $jResp->stringOf("Cluster.Hsms[i].HsmId");
    $State = $jResp->stringOf("Cluster.Hsms[i].State");
    $StateMessage = $jResp->stringOf("Cluster.Hsms[i].StateMessage");
    $SubnetId = $jResp->stringOf("Cluster.Hsms[i].SubnetId");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("Cluster.TagList");
while ($i < $count_i) {
    $jResp->put_I($i);
    $Key = $jResp->stringOf("Cluster.TagList[i].Key");
    $Value = $jResp->stringOf("Cluster.TagList[i].Value");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "Cluster": {
#     "BackupPolicy": "string",
#     "BackupRetentionPolicy": {
#       "Type": "string",
#       "Value": "string"
#     },
#     "Certificates": {
#       "AwsHardwareCertificate": "string",
#       "ClusterCertificate": "string",
#       "ClusterCsr": "string",
#       "HsmCertificate": "string",
#       "ManufacturerHardwareCertificate": "string"
#     },
#     "ClusterId": "string",
#     "CreateTimestamp": number,
#     "Hsms": [
#       {
#         "AvailabilityZone": "string",
#         "ClusterId": "string",
#         "EniId": "string",
#         "EniIp": "string",
#         "HsmId": "string",
#         "State": "string",
#         "StateMessage": "string",
#         "SubnetId": "string"
#       }
#     ],
#     "HsmType": "string",
#     "PreCoPassword": "string",
#     "SecurityGroup": "string",
#     "SourceBackupId": "string",
#     "State": "string",
#     "StateMessage": "string",
#     "SubnetMapping": {
#       "string": "string"
#     },
#     "TagList": [
#       {
#         "Key": "string",
#         "Value": "string"
#       }
#     ],
#     "VpcId": "string"
#   }
# }