Chilkat Online Tools

UpdateReplicationConfigurationTemplate delphiAx Example

AWS Elastic Disaster Recovery

var
rest: TChilkatRest;
success: Integer;
authAws: TChilkatAuthAws;
json: TChilkatJsonObject;
sbRequestBody: TChilkatStringBuilder;
sbResponseBody: TChilkatStringBuilder;
respStatusCode: Integer;
jResp: TChilkatJsonObject;
enabled: Integer;
interval: Integer;
retentionDuration: Integer;
ruleID: Integer;
units: WideString;
strVal: WideString;
arn: WideString;
associateDefaultSecurityGroup: Integer;
bandwidthThrottling: Integer;
createPublicIP: Integer;
dataPlaneRouting: WideString;
defaultLargeStagingDiskType: WideString;
ebsEncryption: WideString;
ebsEncryptionKeyArn: WideString;
replicationConfigurationTemplateID: WideString;
replicationServerInstanceType: WideString;
stagingAreaSubnetId: WideString;
v_String: WideString;
tagsString: WideString;
useDedicatedReplicationServer: Integer;
i: Integer;
count_i: Integer;

begin
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

rest := TChilkatRest.Create(Self);

authAws := TChilkatAuthAws.Create(Self);
authAws.AccessKey := 'AWS_ACCESS_KEY';
authAws.SecretKey := 'AWS_SECRET_KEY';

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
authAws.Region := 'us-west-2';
authAws.ServiceName := 'drs';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
rest.SetAuthAws(authAws.ControlInterface);

// URL: https://drs.us-west-2.amazonaws.com/
// Use the same region as specified above.
success := rest.Connect('drs.us-west-2.amazonaws.com',443,1,1);
if (success <> 1) then
  begin
    Memo1.Lines.Add('ConnectFailReason: ' + IntToStr(rest.ConnectFailReason));
    Memo1.Lines.Add(rest.LastErrorText);
    Exit;
  end;

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

json := TChilkatJsonObject.Create(Self);
json.UpdateString('arn','string');
json.UpdateInt('associateDefaultSecurityGroup',123);
json.UpdateInt('bandwidthThrottling',123);
json.UpdateInt('createPublicIP',123);
json.UpdateString('dataPlaneRouting','string');
json.UpdateString('defaultLargeStagingDiskType','string');
json.UpdateString('ebsEncryption','string');
json.UpdateString('ebsEncryptionKeyArn','string');
json.UpdateInt('pitPolicy[0].enabled',123);
json.UpdateInt('pitPolicy[0].interval',123);
json.UpdateInt('pitPolicy[0].retentionDuration',123);
json.UpdateInt('pitPolicy[0].ruleID',123);
json.UpdateString('pitPolicy[0].units','string');
json.UpdateString('replicationConfigurationTemplateID','string');
json.UpdateString('replicationServerInstanceType','string');
json.UpdateString('replicationServersSecurityGroupsIDs[0]','string');
json.UpdateString('stagingAreaSubnetId','string');
json.UpdateString('stagingAreaTags.string','string');
json.UpdateInt('useDedicatedReplicationServer',123);

// The JSON request body created by the above code:

// {
//   "arn": "string",
//   "associateDefaultSecurityGroup": boolean,
//   "bandwidthThrottling": number,
//   "createPublicIP": boolean,
//   "dataPlaneRouting": "string",
//   "defaultLargeStagingDiskType": "string",
//   "ebsEncryption": "string",
//   "ebsEncryptionKeyArn": "string",
//   "pitPolicy": [
//     {
//       "enabled": boolean,
//       "interval": number,
//       "retentionDuration": number,
//       "ruleID": number,
//       "units": "string"
//     }
//   ],
//   "replicationConfigurationTemplateID": "string",
//   "replicationServerInstanceType": "string",
//   "replicationServersSecurityGroupsIDs": [
//     "string"
//   ],
//   "stagingAreaSubnetId": "string",
//   "stagingAreaTags": {
//     "string": "string"
//   },
//   "useDedicatedReplicationServer": boolean
// }

rest.AddHeader('Content-Type','application/x-amz-json-1.1');
rest.AddHeader('X-Amz-Target','UpdateReplicationConfigurationTemplate');

sbRequestBody := TChilkatStringBuilder.Create(Self);
json.EmitSb(sbRequestBody.ControlInterface);
sbResponseBody := TChilkatStringBuilder.Create(Self);
success := rest.FullRequestSb('POST','/UpdateReplicationConfigurationTemplate',sbRequestBody.ControlInterface,sbResponseBody.ControlInterface);
if (success <> 1) then
  begin
    Memo1.Lines.Add(rest.LastErrorText);
    Exit;
  end;
respStatusCode := rest.ResponseStatusCode;
Memo1.Lines.Add('response status code = ' + IntToStr(respStatusCode));
if (respStatusCode <> 200) then
  begin
    Memo1.Lines.Add('Response Header:');
    Memo1.Lines.Add(rest.ResponseHeader);
    Memo1.Lines.Add('Response Body:');
    Memo1.Lines.Add(sbResponseBody.GetAsString());
    Exit;
  end;

jResp := TChilkatJsonObject.Create(Self);
jResp.LoadSb(sbResponseBody.ControlInterface);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

arn := jResp.StringOf('arn');
associateDefaultSecurityGroup := jResp.IntOf('associateDefaultSecurityGroup');
bandwidthThrottling := jResp.IntOf('bandwidthThrottling');
createPublicIP := jResp.IntOf('createPublicIP');
dataPlaneRouting := jResp.StringOf('dataPlaneRouting');
defaultLargeStagingDiskType := jResp.StringOf('defaultLargeStagingDiskType');
ebsEncryption := jResp.StringOf('ebsEncryption');
ebsEncryptionKeyArn := jResp.StringOf('ebsEncryptionKeyArn');
replicationConfigurationTemplateID := jResp.StringOf('replicationConfigurationTemplateID');
replicationServerInstanceType := jResp.StringOf('replicationServerInstanceType');
stagingAreaSubnetId := jResp.StringOf('stagingAreaSubnetId');
v_String := jResp.StringOf('stagingAreaTags.string');
tagsString := jResp.StringOf('tags.string');
useDedicatedReplicationServer := jResp.IntOf('useDedicatedReplicationServer');
i := 0;
count_i := jResp.SizeOfArray('pitPolicy');
while i < count_i do
  begin
    jResp.I := i;
    enabled := jResp.IntOf('pitPolicy[i].enabled');
    interval := jResp.IntOf('pitPolicy[i].interval');
    retentionDuration := jResp.IntOf('pitPolicy[i].retentionDuration');
    ruleID := jResp.IntOf('pitPolicy[i].ruleID');
    units := jResp.StringOf('pitPolicy[i].units');
    i := i + 1;
  end;

i := 0;
count_i := jResp.SizeOfArray('replicationServersSecurityGroupsIDs');
while i < count_i do
  begin
    jResp.I := i;
    strVal := jResp.StringOf('replicationServersSecurityGroupsIDs[i]');
    i := i + 1;
  end;

// A sample JSON response body parsed by the above code:

// {
//   "arn": "string",
//   "associateDefaultSecurityGroup": boolean,
//   "bandwidthThrottling": number,
//   "createPublicIP": boolean,
//   "dataPlaneRouting": "string",
//   "defaultLargeStagingDiskType": "string",
//   "ebsEncryption": "string",
//   "ebsEncryptionKeyArn": "string",
//   "pitPolicy": [
//     {
//       "enabled": boolean,
//       "interval": number,
//       "retentionDuration": number,
//       "ruleID": number,
//       "units": "string"
//     }
//   ],
//   "replicationConfigurationTemplateID": "string",
//   "replicationServerInstanceType": "string",
//   "replicationServersSecurityGroupsIDs": [
//     "string"
//   ],
//   "stagingAreaSubnetId": "string",
//   "stagingAreaTags": {
//     "string": "string"
//   },
//   "tags": {
//     "string": "string"
//   },
//   "useDedicatedReplicationServer": boolean
// }