Chilkat Online Tools

AllocateConnectionOnInterconnect delphiAx Example

AWS Direct Connect

var
rest: TChilkatRest;
success: Integer;
authAws: TChilkatAuthAws;
json: TChilkatJsonObject;
sbRequestBody: TChilkatStringBuilder;
sbResponseBody: TChilkatStringBuilder;
respStatusCode: Integer;
jResp: TChilkatJsonObject;
ckn: WideString;
secretARN: WideString;
startOn: WideString;
state: WideString;
key: WideString;
value: WideString;
awsDevice: WideString;
awsDeviceV2: WideString;
awsLogicalDeviceId: WideString;
bandwidth: WideString;
connectionId: WideString;
connectionName: WideString;
connectionState: WideString;
encryptionMode: WideString;
hasLogicalRedundancy: WideString;
jumboFrameCapable: Integer;
lagId: WideString;
loaIssueTime: Integer;
location: WideString;
macSecCapable: Integer;
ownerAccount: WideString;
partnerName: WideString;
portEncryptionStatus: WideString;
providerName: WideString;
region: WideString;
vlan: Integer;
i: Integer;
count_i: Integer;

begin
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

rest := TChilkatRest.Create(Self);

authAws := TChilkatAuthAws.Create(Self);
authAws.AccessKey := 'AWS_ACCESS_KEY';
authAws.SecretKey := 'AWS_SECRET_KEY';

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
authAws.Region := 'us-west-2';
authAws.ServiceName := 'directconnect';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
rest.SetAuthAws(authAws.ControlInterface);

// URL: https://directconnect.us-west-2.amazonaws.com/
// Use the same region as specified above.
success := rest.Connect('directconnect.us-west-2.amazonaws.com',443,1,1);
if (success <> 1) then
  begin
    Memo1.Lines.Add('ConnectFailReason: ' + IntToStr(rest.ConnectFailReason));
    Memo1.Lines.Add(rest.LastErrorText);
    Exit;
  end;

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

json := TChilkatJsonObject.Create(Self);
json.UpdateString('bandwidth','string');
json.UpdateString('connectionName','string');
json.UpdateString('interconnectId','string');
json.UpdateString('ownerAccount','string');
json.UpdateInt('vlan',123);

// The JSON request body created by the above code:

// {
//   "bandwidth": "string",
//   "connectionName": "string",
//   "interconnectId": "string",
//   "ownerAccount": "string",
//   "vlan": number
// }

rest.AddHeader('Content-Type','application/x-amz-json-1.1');
rest.AddHeader('X-Amz-Target','OvertureService.AllocateConnectionOnInterconnect');

sbRequestBody := TChilkatStringBuilder.Create(Self);
json.EmitSb(sbRequestBody.ControlInterface);
sbResponseBody := TChilkatStringBuilder.Create(Self);
success := rest.FullRequestSb('POST','/',sbRequestBody.ControlInterface,sbResponseBody.ControlInterface);
if (success <> 1) then
  begin
    Memo1.Lines.Add(rest.LastErrorText);
    Exit;
  end;
respStatusCode := rest.ResponseStatusCode;
Memo1.Lines.Add('response status code = ' + IntToStr(respStatusCode));
if (respStatusCode <> 200) then
  begin
    Memo1.Lines.Add('Response Header:');
    Memo1.Lines.Add(rest.ResponseHeader);
    Memo1.Lines.Add('Response Body:');
    Memo1.Lines.Add(sbResponseBody.GetAsString());
    Exit;
  end;

jResp := TChilkatJsonObject.Create(Self);
jResp.LoadSb(sbResponseBody.ControlInterface);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

awsDevice := jResp.StringOf('awsDevice');
awsDeviceV2 := jResp.StringOf('awsDeviceV2');
awsLogicalDeviceId := jResp.StringOf('awsLogicalDeviceId');
bandwidth := jResp.StringOf('bandwidth');
connectionId := jResp.StringOf('connectionId');
connectionName := jResp.StringOf('connectionName');
connectionState := jResp.StringOf('connectionState');
encryptionMode := jResp.StringOf('encryptionMode');
hasLogicalRedundancy := jResp.StringOf('hasLogicalRedundancy');
jumboFrameCapable := jResp.IntOf('jumboFrameCapable');
lagId := jResp.StringOf('lagId');
loaIssueTime := jResp.IntOf('loaIssueTime');
location := jResp.StringOf('location');
macSecCapable := jResp.IntOf('macSecCapable');
ownerAccount := jResp.StringOf('ownerAccount');
partnerName := jResp.StringOf('partnerName');
portEncryptionStatus := jResp.StringOf('portEncryptionStatus');
providerName := jResp.StringOf('providerName');
region := jResp.StringOf('region');
vlan := jResp.IntOf('vlan');
i := 0;
count_i := jResp.SizeOfArray('macSecKeys');
while i < count_i do
  begin
    jResp.I := i;
    ckn := jResp.StringOf('macSecKeys[i].ckn');
    secretARN := jResp.StringOf('macSecKeys[i].secretARN');
    startOn := jResp.StringOf('macSecKeys[i].startOn');
    state := jResp.StringOf('macSecKeys[i].state');
    i := i + 1;
  end;

i := 0;
count_i := jResp.SizeOfArray('tags');
while i < count_i do
  begin
    jResp.I := i;
    key := jResp.StringOf('tags[i].key');
    value := jResp.StringOf('tags[i].value');
    i := i + 1;
  end;

// A sample JSON response body parsed by the above code:

// {
//   "awsDevice": "string",
//   "awsDeviceV2": "string",
//   "awsLogicalDeviceId": "string",
//   "bandwidth": "string",
//   "connectionId": "string",
//   "connectionName": "string",
//   "connectionState": "string",
//   "encryptionMode": "string",
//   "hasLogicalRedundancy": "string",
//   "jumboFrameCapable": boolean,
//   "lagId": "string",
//   "loaIssueTime": number,
//   "location": "string",
//   "macSecCapable": boolean,
//   "macSecKeys": [
//     {
//       "ckn": "string",
//       "secretARN": "string",
//       "startOn": "string",
//       "state": "string"
//     }
//   ],
//   "ownerAccount": "string",
//   "partnerName": "string",
//   "portEncryptionStatus": "string",
//   "providerName": "string",
//   "region": "string",
//   "tags": [
//     {
//       "key": "string",
//       "value": "string"
//     }
//   ],
//   "vlan": number
// }