BatchDescribeMergeConflicts delphiAx Example
var
rest: TChilkatRest;
success: Integer;
authAws: TChilkatAuthAws;
json: TChilkatJsonObject;
sbRequestBody: TChilkatStringBuilder;
sbResponseBody: TChilkatStringBuilder;
respStatusCode: Integer;
jResp: TChilkatJsonObject;
ContentConflict: Integer;
FileModeConflict: Integer;
Base: WideString;
Destination: WideString;
Source: WideString;
FilePath: WideString;
FileSizesBase: Integer;
FileSizesDestination: Integer;
FileSizesSource: Integer;
IsBinaryFileBase: Integer;
IsBinaryFileDestination: Integer;
IsBinaryFileSource: Integer;
MergeOperationsDestination: WideString;
MergeOperationsSource: WideString;
NumberOfConflicts: Integer;
ObjectTypeConflict: Integer;
ObjectTypesBase: WideString;
ObjectTypesDestination: WideString;
ObjectTypesSource: WideString;
j: Integer;
count_j: Integer;
EndLine: Integer;
HunkContent: WideString;
StartLine: Integer;
destinationEndLine: Integer;
destinationHunkContent: WideString;
destinationStartLine: Integer;
isConflict: Integer;
sourceEndLine: Integer;
sourceHunkContent: WideString;
sourceStartLine: Integer;
exceptionName: WideString;
filePath: WideString;
message: WideString;
baseCommitId: WideString;
destinationCommitId: WideString;
nextToken: WideString;
sourceCommitId: WideString;
i: Integer;
count_i: Integer;
begin
// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.
rest := TChilkatRest.Create(Self);
authAws := TChilkatAuthAws.Create(Self);
authAws.AccessKey := 'AWS_ACCESS_KEY';
authAws.SecretKey := 'AWS_SECRET_KEY';
// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
authAws.Region := 'us-west-2';
authAws.ServiceName := 'codecommit';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
rest.SetAuthAws(authAws.ControlInterface);
// URL: https://codecommit.us-west-2.amazonaws.com/
// Use the same region as specified above.
success := rest.Connect('codecommit.us-west-2.amazonaws.com',443,1,1);
if (success <> 1) then
begin
Memo1.Lines.Add('ConnectFailReason: ' + IntToStr(rest.ConnectFailReason));
Memo1.Lines.Add(rest.LastErrorText);
Exit;
end;
// The following code creates the JSON request body.
// The JSON created by this code is shown below.
// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON
json := TChilkatJsonObject.Create(Self);
json.UpdateString('conflictDetailLevel','string');
json.UpdateString('conflictResolutionStrategy','string');
json.UpdateString('destinationCommitSpecifier','string');
json.UpdateString('filePaths[0]','string');
json.UpdateInt('maxConflictFiles',123);
json.UpdateInt('maxMergeHunks',123);
json.UpdateString('mergeOption','string');
json.UpdateString('nextToken','string');
json.UpdateString('repositoryName','string');
json.UpdateString('sourceCommitSpecifier','string');
// The JSON request body created by the above code:
// {
// "conflictDetailLevel": "string",
// "conflictResolutionStrategy": "string",
// "destinationCommitSpecifier": "string",
// "filePaths": [
// "string"
// ],
// "maxConflictFiles": number,
// "maxMergeHunks": number,
// "mergeOption": "string",
// "nextToken": "string",
// "repositoryName": "string",
// "sourceCommitSpecifier": "string"
// }
rest.AddHeader('Content-Type','application/x-amz-json-1.1');
rest.AddHeader('X-Amz-Target','CodeCommit_20150413.BatchDescribeMergeConflicts');
sbRequestBody := TChilkatStringBuilder.Create(Self);
json.EmitSb(sbRequestBody.ControlInterface);
sbResponseBody := TChilkatStringBuilder.Create(Self);
success := rest.FullRequestSb('POST','/',sbRequestBody.ControlInterface,sbResponseBody.ControlInterface);
if (success <> 1) then
begin
Memo1.Lines.Add(rest.LastErrorText);
Exit;
end;
respStatusCode := rest.ResponseStatusCode;
Memo1.Lines.Add('response status code = ' + IntToStr(respStatusCode));
if (respStatusCode <> 200) then
begin
Memo1.Lines.Add('Response Header:');
Memo1.Lines.Add(rest.ResponseHeader);
Memo1.Lines.Add('Response Body:');
Memo1.Lines.Add(sbResponseBody.GetAsString());
Exit;
end;
jResp := TChilkatJsonObject.Create(Self);
jResp.LoadSb(sbResponseBody.ControlInterface);
// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.
// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON
baseCommitId := jResp.StringOf('baseCommitId');
destinationCommitId := jResp.StringOf('destinationCommitId');
nextToken := jResp.StringOf('nextToken');
sourceCommitId := jResp.StringOf('sourceCommitId');
i := 0;
count_i := jResp.SizeOfArray('conflicts');
while i < count_i do
begin
jResp.I := i;
ContentConflict := jResp.IntOf('conflicts[i].conflictMetadata.contentConflict');
FileModeConflict := jResp.IntOf('conflicts[i].conflictMetadata.fileModeConflict');
Base := jResp.StringOf('conflicts[i].conflictMetadata.fileModes.base');
Destination := jResp.StringOf('conflicts[i].conflictMetadata.fileModes.destination');
Source := jResp.StringOf('conflicts[i].conflictMetadata.fileModes.source');
FilePath := jResp.StringOf('conflicts[i].conflictMetadata.filePath');
FileSizesBase := jResp.IntOf('conflicts[i].conflictMetadata.fileSizes.base');
FileSizesDestination := jResp.IntOf('conflicts[i].conflictMetadata.fileSizes.destination');
FileSizesSource := jResp.IntOf('conflicts[i].conflictMetadata.fileSizes.source');
IsBinaryFileBase := jResp.IntOf('conflicts[i].conflictMetadata.isBinaryFile.base');
IsBinaryFileDestination := jResp.IntOf('conflicts[i].conflictMetadata.isBinaryFile.destination');
IsBinaryFileSource := jResp.IntOf('conflicts[i].conflictMetadata.isBinaryFile.source');
MergeOperationsDestination := jResp.StringOf('conflicts[i].conflictMetadata.mergeOperations.destination');
MergeOperationsSource := jResp.StringOf('conflicts[i].conflictMetadata.mergeOperations.source');
NumberOfConflicts := jResp.IntOf('conflicts[i].conflictMetadata.numberOfConflicts');
ObjectTypeConflict := jResp.IntOf('conflicts[i].conflictMetadata.objectTypeConflict');
ObjectTypesBase := jResp.StringOf('conflicts[i].conflictMetadata.objectTypes.base');
ObjectTypesDestination := jResp.StringOf('conflicts[i].conflictMetadata.objectTypes.destination');
ObjectTypesSource := jResp.StringOf('conflicts[i].conflictMetadata.objectTypes.source');
j := 0;
count_j := jResp.SizeOfArray('conflicts[i].mergeHunks');
while j < count_j do
begin
jResp.J := j;
EndLine := jResp.IntOf('conflicts[i].mergeHunks[j].base.endLine');
HunkContent := jResp.StringOf('conflicts[i].mergeHunks[j].base.hunkContent');
StartLine := jResp.IntOf('conflicts[i].mergeHunks[j].base.startLine');
destinationEndLine := jResp.IntOf('conflicts[i].mergeHunks[j].destination.endLine');
destinationHunkContent := jResp.StringOf('conflicts[i].mergeHunks[j].destination.hunkContent');
destinationStartLine := jResp.IntOf('conflicts[i].mergeHunks[j].destination.startLine');
isConflict := jResp.IntOf('conflicts[i].mergeHunks[j].isConflict');
sourceEndLine := jResp.IntOf('conflicts[i].mergeHunks[j].source.endLine');
sourceHunkContent := jResp.StringOf('conflicts[i].mergeHunks[j].source.hunkContent');
sourceStartLine := jResp.IntOf('conflicts[i].mergeHunks[j].source.startLine');
j := j + 1;
end;
i := i + 1;
end;
i := 0;
count_i := jResp.SizeOfArray('errors');
while i < count_i do
begin
jResp.I := i;
exceptionName := jResp.StringOf('errors[i].exceptionName');
filePath := jResp.StringOf('errors[i].filePath');
message := jResp.StringOf('errors[i].message');
i := i + 1;
end;
// A sample JSON response body parsed by the above code:
// {
// "baseCommitId": "string",
// "conflicts": [
// {
// "conflictMetadata": {
// "contentConflict": boolean,
// "fileModeConflict": boolean,
// "fileModes": {
// "base": "string",
// "destination": "string",
// "source": "string"
// },
// "filePath": "string",
// "fileSizes": {
// "base": number,
// "destination": number,
// "source": number
// },
// "isBinaryFile": {
// "base": boolean,
// "destination": boolean,
// "source": boolean
// },
// "mergeOperations": {
// "destination": "string",
// "source": "string"
// },
// "numberOfConflicts": number,
// "objectTypeConflict": boolean,
// "objectTypes": {
// "base": "string",
// "destination": "string",
// "source": "string"
// }
// },
// "mergeHunks": [
// {
// "base": {
// "endLine": number,
// "hunkContent": "string",
// "startLine": number
// },
// "destination": {
// "endLine": number,
// "hunkContent": "string",
// "startLine": number
// },
// "isConflict": boolean,
// "source": {
// "endLine": number,
// "hunkContent": "string",
// "startLine": number
// }
// }
// ]
// }
// ],
// "destinationCommitId": "string",
// "errors": [
// {
// "exceptionName": "string",
// "filePath": "string",
// "message": "string"
// }
// ],
// "nextToken": "string",
// "sourceCommitId": "string"
// }
