DescribeAssessmentRuns autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "inspector"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://inspector.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("inspector.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("assessmentRunArns[0]","string")
; The JSON request body created by the above code:
; {
; "assessmentRunArns": [
; "string"
; ]
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","InspectorService.DescribeAssessmentRuns")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sArn
Local $sAssessmentTemplateArn
Local $iCompletedAt
Local $iCreatedAt
Local $iDataCollected
Local $iDurationInSeconds
Local $iV_String
Local $sName
Local $iStartedAt
Local $state
Local $iStateChangedAt
Local $iJ
Local $iCount_j
Local $iDate
Local $iError
Local $sV_event
Local $sMessage
Local $snsPublishStatusCode
Local $snsTopicArn
Local $strVal
Local $sKey
Local $sValue
Local $sFailureCode = $oJResp.StringOf("failedItems.string.failureCode")
Local $iRetryable = $oJResp.IntOf("failedItems.string.retryable")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("assessmentRuns")
While $i < $iCount_i
$oJResp.I = $i
$sArn = $oJResp.StringOf("assessmentRuns[i].arn")
$sAssessmentTemplateArn = $oJResp.StringOf("assessmentRuns[i].assessmentTemplateArn")
$iCompletedAt = $oJResp.IntOf("assessmentRuns[i].completedAt")
$iCreatedAt = $oJResp.IntOf("assessmentRuns[i].createdAt")
$iDataCollected = $oJResp.IntOf("assessmentRuns[i].dataCollected")
$iDurationInSeconds = $oJResp.IntOf("assessmentRuns[i].durationInSeconds")
$iV_String = $oJResp.IntOf("assessmentRuns[i].findingCounts.string")
$sName = $oJResp.StringOf("assessmentRuns[i].name")
$iStartedAt = $oJResp.IntOf("assessmentRuns[i].startedAt")
$state = $oJResp.StringOf("assessmentRuns[i].state")
$iStateChangedAt = $oJResp.IntOf("assessmentRuns[i].stateChangedAt")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("assessmentRuns[i].notifications")
While $iJ < $iCount_j
$oJResp.J = $iJ
$iDate = $oJResp.IntOf("assessmentRuns[i].notifications[j].date")
$iError = $oJResp.IntOf("assessmentRuns[i].notifications[j].error")
$sV_event = $oJResp.StringOf("assessmentRuns[i].notifications[j].event")
$sMessage = $oJResp.StringOf("assessmentRuns[i].notifications[j].message")
$snsPublishStatusCode = $oJResp.StringOf("assessmentRuns[i].notifications[j].snsPublishStatusCode")
$snsTopicArn = $oJResp.StringOf("assessmentRuns[i].notifications[j].snsTopicArn")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("assessmentRuns[i].rulesPackageArns")
While $iJ < $iCount_j
$oJResp.J = $iJ
$strVal = $oJResp.StringOf("assessmentRuns[i].rulesPackageArns[j]")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("assessmentRuns[i].stateChanges")
While $iJ < $iCount_j
$oJResp.J = $iJ
$state = $oJResp.StringOf("assessmentRuns[i].stateChanges[j].state")
$iStateChangedAt = $oJResp.IntOf("assessmentRuns[i].stateChanges[j].stateChangedAt")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("assessmentRuns[i].userAttributesForFindings")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sKey = $oJResp.StringOf("assessmentRuns[i].userAttributesForFindings[j].key")
$sValue = $oJResp.StringOf("assessmentRuns[i].userAttributesForFindings[j].value")
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "assessmentRuns": [
; {
; "arn": "string",
; "assessmentTemplateArn": "string",
; "completedAt": number,
; "createdAt": number,
; "dataCollected": boolean,
; "durationInSeconds": number,
; "findingCounts": {
; "string": number
; },
; "name": "string",
; "notifications": [
; {
; "date": number,
; "error": boolean,
; "event": "string",
; "message": "string",
; "snsPublishStatusCode": "string",
; "snsTopicArn": "string"
; }
; ],
; "rulesPackageArns": [
; "string"
; ],
; "startedAt": number,
; "state": "string",
; "stateChangedAt": number,
; "stateChanges": [
; {
; "state": "string",
; "stateChangedAt": number
; }
; ],
; "userAttributesForFindings": [
; {
; "key": "string",
; "value": "string"
; }
; ]
; }
; ],
; "failedItems": {
; "string": {
; "failureCode": "string",
; "retryable": boolean
; }
; }
; }