Chilkat Online Tools

DescribeDataRepositoryTasks autoit Example

Amazon FSx

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "fsx"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://fsx.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("fsx.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("Filters[0].Name","string")
$oJson.UpdateString("Filters[0].Values[0]","string")
$oJson.UpdateInt("MaxResults",123)
$oJson.UpdateString("NextToken","string")
$oJson.UpdateString("TaskIds[0]","string")

; The JSON request body created by the above code:

; {
;   "Filters": [
;     {
;       "Name": "string",
;       "Values": [
;         "string"
;       ]
;     }
;   ],
;   "MaxResults": number,
;   "NextToken": "string",
;   "TaskIds": [
;     "string"
;   ]
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","AWSSimbaAPIService_v20180301.DescribeDataRepositoryTasks")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $iCreationTime
Local $iEndTime
Local $sMessage
Local $sFileSystemId
Local $sLifecycle
Local $iEnabled
Local $sFormat
Local $sPath
Local $sScope
Local $sResourceARN
Local $iStartTime
Local $iFailedCount
Local $iLastUpdatedTime
Local $iSucceededCount
Local $iTotalCount
Local $sTaskId
Local $sV_Type
Local $iJ
Local $iCount_j
Local $strVal
Local $sKey
Local $sValue

Local $sNextToken = $oJResp.StringOf("NextToken")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("DataRepositoryTasks")
While $i < $iCount_i
    $oJResp.I = $i
    $iCreationTime = $oJResp.IntOf("DataRepositoryTasks[i].CreationTime")
    $iEndTime = $oJResp.IntOf("DataRepositoryTasks[i].EndTime")
    $sMessage = $oJResp.StringOf("DataRepositoryTasks[i].FailureDetails.Message")
    $sFileSystemId = $oJResp.StringOf("DataRepositoryTasks[i].FileSystemId")
    $sLifecycle = $oJResp.StringOf("DataRepositoryTasks[i].Lifecycle")
    $iEnabled = $oJResp.IntOf("DataRepositoryTasks[i].Report.Enabled")
    $sFormat = $oJResp.StringOf("DataRepositoryTasks[i].Report.Format")
    $sPath = $oJResp.StringOf("DataRepositoryTasks[i].Report.Path")
    $sScope = $oJResp.StringOf("DataRepositoryTasks[i].Report.Scope")
    $sResourceARN = $oJResp.StringOf("DataRepositoryTasks[i].ResourceARN")
    $iStartTime = $oJResp.IntOf("DataRepositoryTasks[i].StartTime")
    $iFailedCount = $oJResp.IntOf("DataRepositoryTasks[i].Status.FailedCount")
    $iLastUpdatedTime = $oJResp.IntOf("DataRepositoryTasks[i].Status.LastUpdatedTime")
    $iSucceededCount = $oJResp.IntOf("DataRepositoryTasks[i].Status.SucceededCount")
    $iTotalCount = $oJResp.IntOf("DataRepositoryTasks[i].Status.TotalCount")
    $sTaskId = $oJResp.StringOf("DataRepositoryTasks[i].TaskId")
    $sV_Type = $oJResp.StringOf("DataRepositoryTasks[i].Type")
    $iJ = 0
    $iCount_j = $oJResp.SizeOfArray("DataRepositoryTasks[i].Paths")
    While $iJ < $iCount_j
        $oJResp.J = $iJ
        $strVal = $oJResp.StringOf("DataRepositoryTasks[i].Paths[j]")
        $iJ = $iJ + 1
    Wend
    $iJ = 0
    $iCount_j = $oJResp.SizeOfArray("DataRepositoryTasks[i].Tags")
    While $iJ < $iCount_j
        $oJResp.J = $iJ
        $sKey = $oJResp.StringOf("DataRepositoryTasks[i].Tags[j].Key")
        $sValue = $oJResp.StringOf("DataRepositoryTasks[i].Tags[j].Value")
        $iJ = $iJ + 1
    Wend
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "DataRepositoryTasks": [
;     {
;       "CreationTime": number,
;       "EndTime": number,
;       "FailureDetails": {
;         "Message": "string"
;       },
;       "FileSystemId": "string",
;       "Lifecycle": "string",
;       "Paths": [
;         "string"
;       ],
;       "Report": {
;         "Enabled": boolean,
;         "Format": "string",
;         "Path": "string",
;         "Scope": "string"
;       },
;       "ResourceARN": "string",
;       "StartTime": number,
;       "Status": {
;         "FailedCount": number,
;         "LastUpdatedTime": number,
;         "SucceededCount": number,
;         "TotalCount": number
;       },
;       "Tags": [
;         {
;           "Key": "string",
;           "Value": "string"
;         }
;       ],
;       "TaskId": "string",
;       "Type": "string"
;     }
;   ],
;   "NextToken": "string"
; }