DescribeStacks autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "appstream"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://appstream2.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("appstream2.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("Names[0]","string")
$oJson.UpdateString("NextToken","string")
; The JSON request body created by the above code:
; {
; "Names": [
; "string"
; ],
; "NextToken": "string"
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","PhotonAdminProxyService.DescribeStacks")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $iEnabled
Local $sS3BucketName
Local $sSettingsGroup
Local $sArn
Local $iCreatedTime
Local $sDescription
Local $sDisplayName
Local $sFeedbackURL
Local $sName
Local $sRedirectURL
Local $iJ
Local $iCount_j
Local $sEndpointType
Local $sVpceId
Local $strVal
Local $sErrorCode
Local $sErrorMessage
Local $sConnectorType
Local $sResourceIdentifier
Local $iK
Local $iCount_k
Local $sAction
Local $sPermission
Local $sNextToken = $oJResp.StringOf("NextToken")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("Stacks")
While $i < $iCount_i
$oJResp.I = $i
$iEnabled = $oJResp.IntOf("Stacks[i].ApplicationSettings.Enabled")
$sS3BucketName = $oJResp.StringOf("Stacks[i].ApplicationSettings.S3BucketName")
$sSettingsGroup = $oJResp.StringOf("Stacks[i].ApplicationSettings.SettingsGroup")
$sArn = $oJResp.StringOf("Stacks[i].Arn")
$iCreatedTime = $oJResp.IntOf("Stacks[i].CreatedTime")
$sDescription = $oJResp.StringOf("Stacks[i].Description")
$sDisplayName = $oJResp.StringOf("Stacks[i].DisplayName")
$sFeedbackURL = $oJResp.StringOf("Stacks[i].FeedbackURL")
$sName = $oJResp.StringOf("Stacks[i].Name")
$sRedirectURL = $oJResp.StringOf("Stacks[i].RedirectURL")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("Stacks[i].AccessEndpoints")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sEndpointType = $oJResp.StringOf("Stacks[i].AccessEndpoints[j].EndpointType")
$sVpceId = $oJResp.StringOf("Stacks[i].AccessEndpoints[j].VpceId")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("Stacks[i].EmbedHostDomains")
While $iJ < $iCount_j
$oJResp.J = $iJ
$strVal = $oJResp.StringOf("Stacks[i].EmbedHostDomains[j]")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("Stacks[i].StackErrors")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sErrorCode = $oJResp.StringOf("Stacks[i].StackErrors[j].ErrorCode")
$sErrorMessage = $oJResp.StringOf("Stacks[i].StackErrors[j].ErrorMessage")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("Stacks[i].StorageConnectors")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sConnectorType = $oJResp.StringOf("Stacks[i].StorageConnectors[j].ConnectorType")
$sResourceIdentifier = $oJResp.StringOf("Stacks[i].StorageConnectors[j].ResourceIdentifier")
$iK = 0
$iCount_k = $oJResp.SizeOfArray("Stacks[i].StorageConnectors[j].Domains")
While $iK < $iCount_k
$oJResp.K = $iK
$strVal = $oJResp.StringOf("Stacks[i].StorageConnectors[j].Domains[k]")
$iK = $iK + 1
Wend
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("Stacks[i].UserSettings")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sAction = $oJResp.StringOf("Stacks[i].UserSettings[j].Action")
$sPermission = $oJResp.StringOf("Stacks[i].UserSettings[j].Permission")
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "NextToken": "string",
; "Stacks": [
; {
; "AccessEndpoints": [
; {
; "EndpointType": "string",
; "VpceId": "string"
; }
; ],
; "ApplicationSettings": {
; "Enabled": boolean,
; "S3BucketName": "string",
; "SettingsGroup": "string"
; },
; "Arn": "string",
; "CreatedTime": number,
; "Description": "string",
; "DisplayName": "string",
; "EmbedHostDomains": [
; "string"
; ],
; "FeedbackURL": "string",
; "Name": "string",
; "RedirectURL": "string",
; "StackErrors": [
; {
; "ErrorCode": "string",
; "ErrorMessage": "string"
; }
; ],
; "StorageConnectors": [
; {
; "ConnectorType": "string",
; "Domains": [
; "string"
; ],
; "ResourceIdentifier": "string"
; }
; ],
; "UserSettings": [
; {
; "Action": "string",
; "Permission": "string"
; }
; ]
; }
; ]
; }
