Chilkat Online Tools

DeleteImageBuilder autoit Example

Amazon AppStream

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "appstream"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://appstream2.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("appstream2.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("Name","string")

; The JSON request body created by the above code:

; {
;   "Name": "string"
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","PhotonAdminProxyService.DeleteImageBuilder")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $sEndpointType
Local $sVpceId
Local $sErrorCode
Local $sErrorMessage
Local $iErrorTimestamp
Local $strVal

Local $sAppstreamAgentVersion = $oJResp.StringOf("ImageBuilder.AppstreamAgentVersion")
Local $sArn = $oJResp.StringOf("ImageBuilder.Arn")
Local $iCreatedTime = $oJResp.IntOf("ImageBuilder.CreatedTime")
Local $sDescription = $oJResp.StringOf("ImageBuilder.Description")
Local $sDisplayName = $oJResp.StringOf("ImageBuilder.DisplayName")
Local $sDirectoryName = $oJResp.StringOf("ImageBuilder.DomainJoinInfo.DirectoryName")
Local $sOrganizationalUnitDistinguishedName = $oJResp.StringOf("ImageBuilder.DomainJoinInfo.OrganizationalUnitDistinguishedName")
Local $iEnableDefaultInternetAccess = $oJResp.IntOf("ImageBuilder.EnableDefaultInternetAccess")
Local $sIamRoleArn = $oJResp.StringOf("ImageBuilder.IamRoleArn")
Local $sImageArn = $oJResp.StringOf("ImageBuilder.ImageArn")
Local $sInstanceType = $oJResp.StringOf("ImageBuilder.InstanceType")
Local $sName = $oJResp.StringOf("ImageBuilder.Name")
Local $sEniId = $oJResp.StringOf("ImageBuilder.NetworkAccessConfiguration.EniId")
Local $sEniPrivateIpAddress = $oJResp.StringOf("ImageBuilder.NetworkAccessConfiguration.EniPrivateIpAddress")
Local $sPlatform = $oJResp.StringOf("ImageBuilder.Platform")
Local $sState = $oJResp.StringOf("ImageBuilder.State")
Local $sCode = $oJResp.StringOf("ImageBuilder.StateChangeReason.Code")
Local $sMessage = $oJResp.StringOf("ImageBuilder.StateChangeReason.Message")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("ImageBuilder.AccessEndpoints")
While $i < $iCount_i
    $oJResp.I = $i
    $sEndpointType = $oJResp.StringOf("ImageBuilder.AccessEndpoints[i].EndpointType")
    $sVpceId = $oJResp.StringOf("ImageBuilder.AccessEndpoints[i].VpceId")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("ImageBuilder.ImageBuilderErrors")
While $i < $iCount_i
    $oJResp.I = $i
    $sErrorCode = $oJResp.StringOf("ImageBuilder.ImageBuilderErrors[i].ErrorCode")
    $sErrorMessage = $oJResp.StringOf("ImageBuilder.ImageBuilderErrors[i].ErrorMessage")
    $iErrorTimestamp = $oJResp.IntOf("ImageBuilder.ImageBuilderErrors[i].ErrorTimestamp")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("ImageBuilder.VpcConfig.SecurityGroupIds")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("ImageBuilder.VpcConfig.SecurityGroupIds[i]")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("ImageBuilder.VpcConfig.SubnetIds")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("ImageBuilder.VpcConfig.SubnetIds[i]")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "ImageBuilder": {
;     "AccessEndpoints": [
;       {
;         "EndpointType": "string",
;         "VpceId": "string"
;       }
;     ],
;     "AppstreamAgentVersion": "string",
;     "Arn": "string",
;     "CreatedTime": number,
;     "Description": "string",
;     "DisplayName": "string",
;     "DomainJoinInfo": {
;       "DirectoryName": "string",
;       "OrganizationalUnitDistinguishedName": "string"
;     },
;     "EnableDefaultInternetAccess": boolean,
;     "IamRoleArn": "string",
;     "ImageArn": "string",
;     "ImageBuilderErrors": [
;       {
;         "ErrorCode": "string",
;         "ErrorMessage": "string",
;         "ErrorTimestamp": number
;       }
;     ],
;     "InstanceType": "string",
;     "Name": "string",
;     "NetworkAccessConfiguration": {
;       "EniId": "string",
;       "EniPrivateIpAddress": "string"
;     },
;     "Platform": "string",
;     "State": "string",
;     "StateChangeReason": {
;       "Code": "string",
;       "Message": "string"
;     },
;     "VpcConfig": {
;       "SecurityGroupIds": [
;         "string"
;       ],
;       "SubnetIds": [
;         "string"
;       ]
;     }
;   }
; }