GetSampledRequests autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "wafv2"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://wafv2.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("wafv2.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateInt("MaxItems",123)
$oJson.UpdateString("RuleMetricName","string")
$oJson.UpdateString("Scope","string")
$oJson.UpdateInt("TimeWindow.EndTime",123)
$oJson.UpdateInt("TimeWindow.StartTime",123)
$oJson.UpdateString("WebAclArn","string")
; The JSON request body created by the above code:
; {
; "MaxItems": number,
; "RuleMetricName": "string",
; "Scope": "string",
; "TimeWindow": {
; "EndTime": number,
; "StartTime": number
; },
; "WebAclArn": "string"
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","AWSWAF_20190729.GetSampledRequests")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sAction
Local $sFailureReason
Local $iResponseCode
Local $iSolveTimestamp
Local $sClientIP
Local $sCountry
Local $sHTTPVersion
Local $sMethod
Local $sURI
Local $iResponseCodeSent
Local $sRuleNameWithinRuleGroup
Local $iTimestamp
Local $iWeight
Local $iJ
Local $iCount_j
Local $sName
Local $sValue
Local $iPopulationSize = $oJResp.IntOf("PopulationSize")
Local $iEndTime = $oJResp.IntOf("TimeWindow.EndTime")
Local $iStartTime = $oJResp.IntOf("TimeWindow.StartTime")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("SampledRequests")
While $i < $iCount_i
$oJResp.I = $i
$sAction = $oJResp.StringOf("SampledRequests[i].Action")
$sFailureReason = $oJResp.StringOf("SampledRequests[i].CaptchaResponse.FailureReason")
$iResponseCode = $oJResp.IntOf("SampledRequests[i].CaptchaResponse.ResponseCode")
$iSolveTimestamp = $oJResp.IntOf("SampledRequests[i].CaptchaResponse.SolveTimestamp")
$sClientIP = $oJResp.StringOf("SampledRequests[i].Request.ClientIP")
$sCountry = $oJResp.StringOf("SampledRequests[i].Request.Country")
$sHTTPVersion = $oJResp.StringOf("SampledRequests[i].Request.HTTPVersion")
$sMethod = $oJResp.StringOf("SampledRequests[i].Request.Method")
$sURI = $oJResp.StringOf("SampledRequests[i].Request.URI")
$iResponseCodeSent = $oJResp.IntOf("SampledRequests[i].ResponseCodeSent")
$sRuleNameWithinRuleGroup = $oJResp.StringOf("SampledRequests[i].RuleNameWithinRuleGroup")
$iTimestamp = $oJResp.IntOf("SampledRequests[i].Timestamp")
$iWeight = $oJResp.IntOf("SampledRequests[i].Weight")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("SampledRequests[i].Labels")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sName = $oJResp.StringOf("SampledRequests[i].Labels[j].Name")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("SampledRequests[i].Request.Headers")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sName = $oJResp.StringOf("SampledRequests[i].Request.Headers[j].Name")
$sValue = $oJResp.StringOf("SampledRequests[i].Request.Headers[j].Value")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("SampledRequests[i].RequestHeadersInserted")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sName = $oJResp.StringOf("SampledRequests[i].RequestHeadersInserted[j].Name")
$sValue = $oJResp.StringOf("SampledRequests[i].RequestHeadersInserted[j].Value")
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "PopulationSize": number,
; "SampledRequests": [
; {
; "Action": "string",
; "CaptchaResponse": {
; "FailureReason": "string",
; "ResponseCode": number,
; "SolveTimestamp": number
; },
; "Labels": [
; {
; "Name": "string"
; }
; ],
; "Request": {
; "ClientIP": "string",
; "Country": "string",
; "Headers": [
; {
; "Name": "string",
; "Value": "string"
; }
; ],
; "HTTPVersion": "string",
; "Method": "string",
; "URI": "string"
; },
; "RequestHeadersInserted": [
; {
; "Name": "string",
; "Value": "string"
; }
; ],
; "ResponseCodeSent": number,
; "RuleNameWithinRuleGroup": "string",
; "Timestamp": number,
; "Weight": number
; }
; ],
; "TimeWindow": {
; "EndTime": number,
; "StartTime": number
; }
; }
