Chilkat Online Tools

UpdateServer autoit Example

AWS OpsWorks CM

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "opsworks-cm"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://opsworks-cm.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("opsworks-cm.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateInt("BackupRetentionCount",123)
$oJson.UpdateInt("DisableAutomatedBackup",123)
$oJson.UpdateString("PreferredBackupWindow","string")
$oJson.UpdateString("PreferredMaintenanceWindow","string")
$oJson.UpdateString("ServerName","string")

; The JSON request body created by the above code:

; {
;   "BackupRetentionCount": number,
;   "DisableAutomatedBackup": boolean,
;   "PreferredBackupWindow": "string",
;   "PreferredMaintenanceWindow": "string",
;   "ServerName": "string"
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","OpsWorksCM_V2016_11_01.UpdateServer")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $sName
Local $sValue
Local $strVal

Local $iAssociatePublicIpAddress = $oJResp.IntOf("Server.AssociatePublicIpAddress")
Local $iBackupRetentionCount = $oJResp.IntOf("Server.BackupRetentionCount")
Local $sCloudFormationStackArn = $oJResp.StringOf("Server.CloudFormationStackArn")
Local $iCreatedAt = $oJResp.IntOf("Server.CreatedAt")
Local $sCustomDomain = $oJResp.StringOf("Server.CustomDomain")
Local $iDisableAutomatedBackup = $oJResp.IntOf("Server.DisableAutomatedBackup")
Local $sEndpoint = $oJResp.StringOf("Server.Endpoint")
Local $sEngine = $oJResp.StringOf("Server.Engine")
Local $sEngineModel = $oJResp.StringOf("Server.EngineModel")
Local $sEngineVersion = $oJResp.StringOf("Server.EngineVersion")
Local $sInstanceProfileArn = $oJResp.StringOf("Server.InstanceProfileArn")
Local $sInstanceType = $oJResp.StringOf("Server.InstanceType")
Local $sKeyPair = $oJResp.StringOf("Server.KeyPair")
Local $sMaintenanceStatus = $oJResp.StringOf("Server.MaintenanceStatus")
Local $sPreferredBackupWindow = $oJResp.StringOf("Server.PreferredBackupWindow")
Local $sPreferredMaintenanceWindow = $oJResp.StringOf("Server.PreferredMaintenanceWindow")
Local $sServerArn = $oJResp.StringOf("Server.ServerArn")
Local $sServerName = $oJResp.StringOf("Server.ServerName")
Local $sServiceRoleArn = $oJResp.StringOf("Server.ServiceRoleArn")
Local $sStatus = $oJResp.StringOf("Server.Status")
Local $sStatusReason = $oJResp.StringOf("Server.StatusReason")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("Server.EngineAttributes")
While $i < $iCount_i
    $oJResp.I = $i
    $sName = $oJResp.StringOf("Server.EngineAttributes[i].Name")
    $sValue = $oJResp.StringOf("Server.EngineAttributes[i].Value")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("Server.SecurityGroupIds")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("Server.SecurityGroupIds[i]")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("Server.SubnetIds")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("Server.SubnetIds[i]")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "Server": {
;     "AssociatePublicIpAddress": boolean,
;     "BackupRetentionCount": number,
;     "CloudFormationStackArn": "string",
;     "CreatedAt": number,
;     "CustomDomain": "string",
;     "DisableAutomatedBackup": boolean,
;     "Endpoint": "string",
;     "Engine": "string",
;     "EngineAttributes": [
;       {
;         "Name": "string",
;         "Value": "string"
;       }
;     ],
;     "EngineModel": "string",
;     "EngineVersion": "string",
;     "InstanceProfileArn": "string",
;     "InstanceType": "string",
;     "KeyPair": "string",
;     "MaintenanceStatus": "string",
;     "PreferredBackupWindow": "string",
;     "PreferredMaintenanceWindow": "string",
;     "SecurityGroupIds": [
;       "string"
;     ],
;     "ServerArn": "string",
;     "ServerName": "string",
;     "ServiceRoleArn": "string",
;     "Status": "string",
;     "StatusReason": "string",
;     "SubnetIds": [
;       "string"
;     ]
;   }
; }