Chilkat Online Tools

CreateVpcAttachment autoit Example

AWS Network Manager

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "networkmanager"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://networkmanager.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("networkmanager.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("ClientToken","string")
$oJson.UpdateString("CoreNetworkId","string")
$oJson.UpdateInt("Options.Ipv6Support",123)
$oJson.UpdateString("SubnetArns[0]","string")
$oJson.UpdateString("Tags[0].Key","string")
$oJson.UpdateString("Tags[0].Value","string")
$oJson.UpdateString("VpcArn","string")

; The JSON request body created by the above code:

; {
;   "ClientToken": "string",
;   "CoreNetworkId": "string",
;   "Options": {
;     "Ipv6Support": boolean
;   },
;   "SubnetArns": [
;     "string"
;   ],
;   "Tags": [
;     {
;       "Key": "string",
;       "Value": "string"
;     }
;   ],
;   "VpcArn": "string"
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","CreateVpcAttachment")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/vpc-attachments",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $sKey
Local $sValue
Local $strVal

Local $sAttachmentId = $oJResp.StringOf("VpcAttachment.Attachment.AttachmentId")
Local $iAttachmentPolicyRuleNumber = $oJResp.IntOf("VpcAttachment.Attachment.AttachmentPolicyRuleNumber")
Local $sAttachmentType = $oJResp.StringOf("VpcAttachment.Attachment.AttachmentType")
Local $sCoreNetworkArn = $oJResp.StringOf("VpcAttachment.Attachment.CoreNetworkArn")
Local $sCoreNetworkId = $oJResp.StringOf("VpcAttachment.Attachment.CoreNetworkId")
Local $iCreatedAt = $oJResp.IntOf("VpcAttachment.Attachment.CreatedAt")
Local $sEdgeLocation = $oJResp.StringOf("VpcAttachment.Attachment.EdgeLocation")
Local $sOwnerAccountId = $oJResp.StringOf("VpcAttachment.Attachment.OwnerAccountId")
Local $iProposedSegmentChangeAttachmentPolicyRuleNumber = $oJResp.IntOf("VpcAttachment.Attachment.ProposedSegmentChange.AttachmentPolicyRuleNumber")
Local $sSegmentName = $oJResp.StringOf("VpcAttachment.Attachment.ProposedSegmentChange.SegmentName")
Local $sResourceArn = $oJResp.StringOf("VpcAttachment.Attachment.ResourceArn")
Local $sAttachmentSegmentName = $oJResp.StringOf("VpcAttachment.Attachment.SegmentName")
Local $sState = $oJResp.StringOf("VpcAttachment.Attachment.State")
Local $iUpdatedAt = $oJResp.IntOf("VpcAttachment.Attachment.UpdatedAt")
Local $iIpv6Support = $oJResp.IntOf("VpcAttachment.Options.Ipv6Support")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("VpcAttachment.Attachment.ProposedSegmentChange.Tags")
While $i < $iCount_i
    $oJResp.I = $i
    $sKey = $oJResp.StringOf("VpcAttachment.Attachment.ProposedSegmentChange.Tags[i].Key")
    $sValue = $oJResp.StringOf("VpcAttachment.Attachment.ProposedSegmentChange.Tags[i].Value")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("VpcAttachment.Attachment.Tags")
While $i < $iCount_i
    $oJResp.I = $i
    $sKey = $oJResp.StringOf("VpcAttachment.Attachment.Tags[i].Key")
    $sValue = $oJResp.StringOf("VpcAttachment.Attachment.Tags[i].Value")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("VpcAttachment.SubnetArns")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("VpcAttachment.SubnetArns[i]")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "VpcAttachment": {
;     "Attachment": {
;       "AttachmentId": "string",
;       "AttachmentPolicyRuleNumber": number,
;       "AttachmentType": "string",
;       "CoreNetworkArn": "string",
;       "CoreNetworkId": "string",
;       "CreatedAt": number,
;       "EdgeLocation": "string",
;       "OwnerAccountId": "string",
;       "ProposedSegmentChange": {
;         "AttachmentPolicyRuleNumber": number,
;         "SegmentName": "string",
;         "Tags": [
;           {
;             "Key": "string",
;             "Value": "string"
;           }
;         ]
;       },
;       "ResourceArn": "string",
;       "SegmentName": "string",
;       "State": "string",
;       "Tags": [
;         {
;           "Key": "string",
;           "Value": "string"
;         }
;       ],
;       "UpdatedAt": number
;     },
;     "Options": {
;       "Ipv6Support": boolean
;     },
;     "SubnetArns": [
;       "string"
;     ]
;   }
; }