Chilkat Online Tools

UpdateReplicationConfiguration autoit Example

AWS Elastic Disaster Recovery

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "drs"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://drs.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("drs.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateInt("associateDefaultSecurityGroup",123)
$oJson.UpdateInt("bandwidthThrottling",123)
$oJson.UpdateInt("createPublicIP",123)
$oJson.UpdateString("dataPlaneRouting","string")
$oJson.UpdateString("defaultLargeStagingDiskType","string")
$oJson.UpdateString("ebsEncryption","string")
$oJson.UpdateString("ebsEncryptionKeyArn","string")
$oJson.UpdateString("name","string")
$oJson.UpdateInt("pitPolicy[0].enabled",123)
$oJson.UpdateInt("pitPolicy[0].interval",123)
$oJson.UpdateInt("pitPolicy[0].retentionDuration",123)
$oJson.UpdateInt("pitPolicy[0].ruleID",123)
$oJson.UpdateString("pitPolicy[0].units","string")
$oJson.UpdateString("replicatedDisks[0].deviceName","string")
$oJson.UpdateInt("replicatedDisks[0].iops",123)
$oJson.UpdateInt("replicatedDisks[0].isBootDisk",123)
$oJson.UpdateString("replicatedDisks[0].stagingDiskType","string")
$oJson.UpdateInt("replicatedDisks[0].throughput",123)
$oJson.UpdateString("replicationServerInstanceType","string")
$oJson.UpdateString("replicationServersSecurityGroupsIDs[0]","string")
$oJson.UpdateString("sourceServerID","string")
$oJson.UpdateString("stagingAreaSubnetId","string")
$oJson.UpdateString("stagingAreaTags.string","string")
$oJson.UpdateInt("useDedicatedReplicationServer",123)

; The JSON request body created by the above code:

; {
;   "associateDefaultSecurityGroup": boolean,
;   "bandwidthThrottling": number,
;   "createPublicIP": boolean,
;   "dataPlaneRouting": "string",
;   "defaultLargeStagingDiskType": "string",
;   "ebsEncryption": "string",
;   "ebsEncryptionKeyArn": "string",
;   "name": "string",
;   "pitPolicy": [
;     {
;       "enabled": boolean,
;       "interval": number,
;       "retentionDuration": number,
;       "ruleID": number,
;       "units": "string"
;     }
;   ],
;   "replicatedDisks": [
;     {
;       "deviceName": "string",
;       "iops": number,
;       "isBootDisk": boolean,
;       "stagingDiskType": "string",
;       "throughput": number
;     }
;   ],
;   "replicationServerInstanceType": "string",
;   "replicationServersSecurityGroupsIDs": [
;     "string"
;   ],
;   "sourceServerID": "string",
;   "stagingAreaSubnetId": "string",
;   "stagingAreaTags": {
;     "string": "string"
;   },
;   "useDedicatedReplicationServer": boolean
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","UpdateReplicationConfiguration")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/UpdateReplicationConfiguration",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $iEnabled
Local $interval
Local $iRetentionDuration
Local $iRuleID
Local $sUnits
Local $sDeviceName
Local $iops
Local $isBootDisk
Local $stagingDiskType
Local $iThroughput
Local $strVal

Local $iAssociateDefaultSecurityGroup = $oJResp.IntOf("associateDefaultSecurityGroup")
Local $iBandwidthThrottling = $oJResp.IntOf("bandwidthThrottling")
Local $iCreatePublicIP = $oJResp.IntOf("createPublicIP")
Local $sDataPlaneRouting = $oJResp.StringOf("dataPlaneRouting")
Local $sDefaultLargeStagingDiskType = $oJResp.StringOf("defaultLargeStagingDiskType")
Local $sEbsEncryption = $oJResp.StringOf("ebsEncryption")
Local $sEbsEncryptionKeyArn = $oJResp.StringOf("ebsEncryptionKeyArn")
Local $sName = $oJResp.StringOf("name")
Local $sReplicationServerInstanceType = $oJResp.StringOf("replicationServerInstanceType")
Local $sourceServerID = $oJResp.StringOf("sourceServerID")
Local $stagingAreaSubnetId = $oJResp.StringOf("stagingAreaSubnetId")
Local $sV_String = $oJResp.StringOf("stagingAreaTags.string")
Local $iUseDedicatedReplicationServer = $oJResp.IntOf("useDedicatedReplicationServer")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("pitPolicy")
While $i < $iCount_i
    $oJResp.I = $i
    $iEnabled = $oJResp.IntOf("pitPolicy[i].enabled")
    $interval = $oJResp.IntOf("pitPolicy[i].interval")
    $iRetentionDuration = $oJResp.IntOf("pitPolicy[i].retentionDuration")
    $iRuleID = $oJResp.IntOf("pitPolicy[i].ruleID")
    $sUnits = $oJResp.StringOf("pitPolicy[i].units")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("replicatedDisks")
While $i < $iCount_i
    $oJResp.I = $i
    $sDeviceName = $oJResp.StringOf("replicatedDisks[i].deviceName")
    $iops = $oJResp.IntOf("replicatedDisks[i].iops")
    $isBootDisk = $oJResp.IntOf("replicatedDisks[i].isBootDisk")
    $stagingDiskType = $oJResp.StringOf("replicatedDisks[i].stagingDiskType")
    $iThroughput = $oJResp.IntOf("replicatedDisks[i].throughput")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("replicationServersSecurityGroupsIDs")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("replicationServersSecurityGroupsIDs[i]")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "associateDefaultSecurityGroup": boolean,
;   "bandwidthThrottling": number,
;   "createPublicIP": boolean,
;   "dataPlaneRouting": "string",
;   "defaultLargeStagingDiskType": "string",
;   "ebsEncryption": "string",
;   "ebsEncryptionKeyArn": "string",
;   "name": "string",
;   "pitPolicy": [
;     {
;       "enabled": boolean,
;       "interval": number,
;       "retentionDuration": number,
;       "ruleID": number,
;       "units": "string"
;     }
;   ],
;   "replicatedDisks": [
;     {
;       "deviceName": "string",
;       "iops": number,
;       "isBootDisk": boolean,
;       "stagingDiskType": "string",
;       "throughput": number
;     }
;   ],
;   "replicationServerInstanceType": "string",
;   "replicationServersSecurityGroupsIDs": [
;     "string"
;   ],
;   "sourceServerID": "string",
;   "stagingAreaSubnetId": "string",
;   "stagingAreaTags": {
;     "string": "string"
;   },
;   "useDedicatedReplicationServer": boolean
; }