DescribeConnectionsOnInterconnect autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "directconnect"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://directconnect.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("directconnect.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("interconnectId","string")
; The JSON request body created by the above code:
; {
; "interconnectId": "string"
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","OvertureService.DescribeConnectionsOnInterconnect")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sAwsDevice
Local $sAwsDeviceV2
Local $sAwsLogicalDeviceId
Local $sBandwidth
Local $sConnectionId
Local $sConnectionName
Local $sConnectionState
Local $sEncryptionMode
Local $sHasLogicalRedundancy
Local $iJumboFrameCapable
Local $sLagId
Local $iLoaIssueTime
Local $sLocation
Local $iMacSecCapable
Local $sOwnerAccount
Local $sPartnerName
Local $sPortEncryptionStatus
Local $sProviderName
Local $sRegion
Local $iVlan
Local $iJ
Local $iCount_j
Local $sCkn
Local $secretARN
Local $startOn
Local $state
Local $sKey
Local $sValue
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("connections")
While $i < $iCount_i
$oJResp.I = $i
$sAwsDevice = $oJResp.StringOf("connections[i].awsDevice")
$sAwsDeviceV2 = $oJResp.StringOf("connections[i].awsDeviceV2")
$sAwsLogicalDeviceId = $oJResp.StringOf("connections[i].awsLogicalDeviceId")
$sBandwidth = $oJResp.StringOf("connections[i].bandwidth")
$sConnectionId = $oJResp.StringOf("connections[i].connectionId")
$sConnectionName = $oJResp.StringOf("connections[i].connectionName")
$sConnectionState = $oJResp.StringOf("connections[i].connectionState")
$sEncryptionMode = $oJResp.StringOf("connections[i].encryptionMode")
$sHasLogicalRedundancy = $oJResp.StringOf("connections[i].hasLogicalRedundancy")
$iJumboFrameCapable = $oJResp.IntOf("connections[i].jumboFrameCapable")
$sLagId = $oJResp.StringOf("connections[i].lagId")
$iLoaIssueTime = $oJResp.IntOf("connections[i].loaIssueTime")
$sLocation = $oJResp.StringOf("connections[i].location")
$iMacSecCapable = $oJResp.IntOf("connections[i].macSecCapable")
$sOwnerAccount = $oJResp.StringOf("connections[i].ownerAccount")
$sPartnerName = $oJResp.StringOf("connections[i].partnerName")
$sPortEncryptionStatus = $oJResp.StringOf("connections[i].portEncryptionStatus")
$sProviderName = $oJResp.StringOf("connections[i].providerName")
$sRegion = $oJResp.StringOf("connections[i].region")
$iVlan = $oJResp.IntOf("connections[i].vlan")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("connections[i].macSecKeys")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sCkn = $oJResp.StringOf("connections[i].macSecKeys[j].ckn")
$secretARN = $oJResp.StringOf("connections[i].macSecKeys[j].secretARN")
$startOn = $oJResp.StringOf("connections[i].macSecKeys[j].startOn")
$state = $oJResp.StringOf("connections[i].macSecKeys[j].state")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("connections[i].tags")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sKey = $oJResp.StringOf("connections[i].tags[j].key")
$sValue = $oJResp.StringOf("connections[i].tags[j].value")
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "connections": [
; {
; "awsDevice": "string",
; "awsDeviceV2": "string",
; "awsLogicalDeviceId": "string",
; "bandwidth": "string",
; "connectionId": "string",
; "connectionName": "string",
; "connectionState": "string",
; "encryptionMode": "string",
; "hasLogicalRedundancy": "string",
; "jumboFrameCapable": boolean,
; "lagId": "string",
; "loaIssueTime": number,
; "location": "string",
; "macSecCapable": boolean,
; "macSecKeys": [
; {
; "ckn": "string",
; "secretARN": "string",
; "startOn": "string",
; "state": "string"
; }
; ],
; "ownerAccount": "string",
; "partnerName": "string",
; "portEncryptionStatus": "string",
; "providerName": "string",
; "region": "string",
; "tags": [
; {
; "key": "string",
; "value": "string"
; }
; ],
; "vlan": number
; }
; ]
; }
