Chilkat Online Tools

DeleteConnection autoit Example

AWS Direct Connect

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "directconnect"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://directconnect.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("directconnect.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("connectionId","string")

; The JSON request body created by the above code:

; {
;   "connectionId": "string"
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","OvertureService.DeleteConnection")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $sCkn
Local $secretARN
Local $startOn
Local $state
Local $sKey
Local $sValue

Local $sAwsDevice = $oJResp.StringOf("awsDevice")
Local $sAwsDeviceV2 = $oJResp.StringOf("awsDeviceV2")
Local $sAwsLogicalDeviceId = $oJResp.StringOf("awsLogicalDeviceId")
Local $sBandwidth = $oJResp.StringOf("bandwidth")
Local $sConnectionId = $oJResp.StringOf("connectionId")
Local $sConnectionName = $oJResp.StringOf("connectionName")
Local $sConnectionState = $oJResp.StringOf("connectionState")
Local $sEncryptionMode = $oJResp.StringOf("encryptionMode")
Local $sHasLogicalRedundancy = $oJResp.StringOf("hasLogicalRedundancy")
Local $iJumboFrameCapable = $oJResp.IntOf("jumboFrameCapable")
Local $sLagId = $oJResp.StringOf("lagId")
Local $iLoaIssueTime = $oJResp.IntOf("loaIssueTime")
Local $sLocation = $oJResp.StringOf("location")
Local $iMacSecCapable = $oJResp.IntOf("macSecCapable")
Local $sOwnerAccount = $oJResp.StringOf("ownerAccount")
Local $sPartnerName = $oJResp.StringOf("partnerName")
Local $sPortEncryptionStatus = $oJResp.StringOf("portEncryptionStatus")
Local $sProviderName = $oJResp.StringOf("providerName")
Local $sRegion = $oJResp.StringOf("region")
Local $iVlan = $oJResp.IntOf("vlan")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("macSecKeys")
While $i < $iCount_i
    $oJResp.I = $i
    $sCkn = $oJResp.StringOf("macSecKeys[i].ckn")
    $secretARN = $oJResp.StringOf("macSecKeys[i].secretARN")
    $startOn = $oJResp.StringOf("macSecKeys[i].startOn")
    $state = $oJResp.StringOf("macSecKeys[i].state")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("tags")
While $i < $iCount_i
    $oJResp.I = $i
    $sKey = $oJResp.StringOf("tags[i].key")
    $sValue = $oJResp.StringOf("tags[i].value")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "awsDevice": "string",
;   "awsDeviceV2": "string",
;   "awsLogicalDeviceId": "string",
;   "bandwidth": "string",
;   "connectionId": "string",
;   "connectionName": "string",
;   "connectionState": "string",
;   "encryptionMode": "string",
;   "hasLogicalRedundancy": "string",
;   "jumboFrameCapable": boolean,
;   "lagId": "string",
;   "loaIssueTime": number,
;   "location": "string",
;   "macSecCapable": boolean,
;   "macSecKeys": [
;     {
;       "ckn": "string",
;       "secretARN": "string",
;       "startOn": "string",
;       "state": "string"
;     }
;   ],
;   "ownerAccount": "string",
;   "partnerName": "string",
;   "portEncryptionStatus": "string",
;   "providerName": "string",
;   "region": "string",
;   "tags": [
;     {
;       "key": "string",
;       "value": "string"
;     }
;   ],
;   "vlan": number
; }