StopRemoteAccessSession autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "devicefarm"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://devicefarm.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("devicefarm.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("arn","string")
; The JSON request body created by the above code:
; {
; "arn": "string"
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","DeviceFarm_20150623.StopRemoteAccessSession")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sArn
Local $sDeviceArn
Local $sInstanceProfileArn
Local $sDescription
Local $sInstanceProfileName
Local $iPackageCleanup
Local $iRebootAfterUse
Local $status
Local $sUdid
Local $iJ
Local $iCount_j
Local $strVal
Local $sArn = $oJResp.StringOf("remoteAccessSession.arn")
Local $sBillingMethod = $oJResp.StringOf("remoteAccessSession.billingMethod")
Local $sClientId = $oJResp.StringOf("remoteAccessSession.clientId")
Local $iCreated = $oJResp.IntOf("remoteAccessSession.created")
Local $sDeviceArn = $oJResp.StringOf("remoteAccessSession.device.arn")
Local $sAvailability = $oJResp.StringOf("remoteAccessSession.device.availability")
Local $sCarrier = $oJResp.StringOf("remoteAccessSession.device.carrier")
Local $sArchitecture = $oJResp.StringOf("remoteAccessSession.device.cpu.architecture")
Local $iClock = $oJResp.IntOf("remoteAccessSession.device.cpu.clock")
Local $sFrequency = $oJResp.StringOf("remoteAccessSession.device.cpu.frequency")
Local $sFleetName = $oJResp.StringOf("remoteAccessSession.device.fleetName")
Local $sFleetType = $oJResp.StringOf("remoteAccessSession.device.fleetType")
Local $sFormFactor = $oJResp.StringOf("remoteAccessSession.device.formFactor")
Local $iHeapSize = $oJResp.IntOf("remoteAccessSession.device.heapSize")
Local $sImage = $oJResp.StringOf("remoteAccessSession.device.image")
Local $sManufacturer = $oJResp.StringOf("remoteAccessSession.device.manufacturer")
Local $iMemory = $oJResp.IntOf("remoteAccessSession.device.memory")
Local $sModel = $oJResp.StringOf("remoteAccessSession.device.model")
Local $sModelId = $oJResp.StringOf("remoteAccessSession.device.modelId")
Local $sName = $oJResp.StringOf("remoteAccessSession.device.name")
Local $sOs = $oJResp.StringOf("remoteAccessSession.device.os")
Local $sPlatform = $oJResp.StringOf("remoteAccessSession.device.platform")
Local $sRadio = $oJResp.StringOf("remoteAccessSession.device.radio")
Local $iRemoteAccessEnabled = $oJResp.IntOf("remoteAccessSession.device.remoteAccessEnabled")
Local $iRemoteDebugEnabled = $oJResp.IntOf("remoteAccessSession.device.remoteDebugEnabled")
Local $iHeight = $oJResp.IntOf("remoteAccessSession.device.resolution.height")
Local $iWidth = $oJResp.IntOf("remoteAccessSession.device.resolution.width")
Local $iMetered = $oJResp.IntOf("remoteAccessSession.deviceMinutes.metered")
Local $iTotal = $oJResp.IntOf("remoteAccessSession.deviceMinutes.total")
Local $iUnmetered = $oJResp.IntOf("remoteAccessSession.deviceMinutes.unmetered")
Local $sDeviceUdid = $oJResp.StringOf("remoteAccessSession.deviceUdid")
Local $sEndpoint = $oJResp.StringOf("remoteAccessSession.endpoint")
Local $sHostAddress = $oJResp.StringOf("remoteAccessSession.hostAddress")
Local $sInstanceArn = $oJResp.StringOf("remoteAccessSession.instanceArn")
Local $sInteractionMode = $oJResp.StringOf("remoteAccessSession.interactionMode")
Local $sMessage = $oJResp.StringOf("remoteAccessSession.message")
Local $sRemoteAccessSessionName = $oJResp.StringOf("remoteAccessSession.name")
Local $iRemoteAccessSessionRemoteDebugEnabled = $oJResp.IntOf("remoteAccessSession.remoteDebugEnabled")
Local $sRemoteRecordAppArn = $oJResp.StringOf("remoteAccessSession.remoteRecordAppArn")
Local $iRemoteRecordEnabled = $oJResp.IntOf("remoteAccessSession.remoteRecordEnabled")
Local $sResult = $oJResp.StringOf("remoteAccessSession.result")
Local $iSkipAppResign = $oJResp.IntOf("remoteAccessSession.skipAppResign")
Local $iStarted = $oJResp.IntOf("remoteAccessSession.started")
Local $sStatus = $oJResp.StringOf("remoteAccessSession.status")
Local $iStopped = $oJResp.IntOf("remoteAccessSession.stopped")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("remoteAccessSession.device.instances")
While $i < $iCount_i
$oJResp.I = $i
$sArn = $oJResp.StringOf("remoteAccessSession.device.instances[i].arn")
$sDeviceArn = $oJResp.StringOf("remoteAccessSession.device.instances[i].deviceArn")
$sInstanceProfileArn = $oJResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.arn")
$sDescription = $oJResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.description")
$sInstanceProfileName = $oJResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.name")
$iPackageCleanup = $oJResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.packageCleanup")
$iRebootAfterUse = $oJResp.IntOf("remoteAccessSession.device.instances[i].instanceProfile.rebootAfterUse")
$status = $oJResp.StringOf("remoteAccessSession.device.instances[i].status")
$sUdid = $oJResp.StringOf("remoteAccessSession.device.instances[i].udid")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup")
While $iJ < $iCount_j
$oJResp.J = $iJ
$strVal = $oJResp.StringOf("remoteAccessSession.device.instances[i].instanceProfile.excludeAppPackagesFromCleanup[j]")
$iJ = $iJ + 1
Wend
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("remoteAccessSession.device.instances[i].labels")
While $iJ < $iCount_j
$oJResp.J = $iJ
$strVal = $oJResp.StringOf("remoteAccessSession.device.instances[i].labels[j]")
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "remoteAccessSession": {
; "arn": "string",
; "billingMethod": "string",
; "clientId": "string",
; "created": number,
; "device": {
; "arn": "string",
; "availability": "string",
; "carrier": "string",
; "cpu": {
; "architecture": "string",
; "clock": number,
; "frequency": "string"
; },
; "fleetName": "string",
; "fleetType": "string",
; "formFactor": "string",
; "heapSize": number,
; "image": "string",
; "instances": [
; {
; "arn": "string",
; "deviceArn": "string",
; "instanceProfile": {
; "arn": "string",
; "description": "string",
; "excludeAppPackagesFromCleanup": [
; "string"
; ],
; "name": "string",
; "packageCleanup": boolean,
; "rebootAfterUse": boolean
; },
; "labels": [
; "string"
; ],
; "status": "string",
; "udid": "string"
; }
; ],
; "manufacturer": "string",
; "memory": number,
; "model": "string",
; "modelId": "string",
; "name": "string",
; "os": "string",
; "platform": "string",
; "radio": "string",
; "remoteAccessEnabled": boolean,
; "remoteDebugEnabled": boolean,
; "resolution": {
; "height": number,
; "width": number
; }
; },
; "deviceMinutes": {
; "metered": number,
; "total": number,
; "unmetered": number
; },
; "deviceUdid": "string",
; "endpoint": "string",
; "hostAddress": "string",
; "instanceArn": "string",
; "interactionMode": "string",
; "message": "string",
; "name": "string",
; "remoteDebugEnabled": boolean,
; "remoteRecordAppArn": "string",
; "remoteRecordEnabled": boolean,
; "result": "string",
; "skipAppResign": boolean,
; "started": number,
; "status": "string",
; "stopped": number
; }
; }
