BatchGetAggregateResourceConfig autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "config"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://config.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("config.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("ConfigurationAggregatorName","string")
$oJson.UpdateString("ResourceIdentifiers[0].ResourceId","string")
$oJson.UpdateString("ResourceIdentifiers[0].ResourceName","string")
$oJson.UpdateString("ResourceIdentifiers[0].ResourceType","string")
$oJson.UpdateString("ResourceIdentifiers[0].SourceAccountId","string")
$oJson.UpdateString("ResourceIdentifiers[0].SourceRegion","string")
; The JSON request body created by the above code:
; {
; "ConfigurationAggregatorName": "string",
; "ResourceIdentifiers": [
; {
; "ResourceId": "string",
; "ResourceName": "string",
; "ResourceType": "string",
; "SourceAccountId": "string",
; "SourceRegion": "string"
; }
; ]
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","StarlingDoveService.BatchGetAggregateResourceConfig")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sAccountId
Local $sArn
Local $sAvailabilityZone
Local $sAwsRegion
Local $sConfiguration
Local $iConfigurationItemCaptureTime
Local $sConfigurationItemStatus
Local $sConfigurationStateId
Local $iResourceCreationTime
Local $sResourceId
Local $sResourceName
Local $sResourceType
Local $sV_String
Local $sVersion
Local $sResourceId
Local $sResourceName
Local $sResourceType
Local $sSourceAccountId
Local $sSourceRegion
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("BaseConfigurationItems")
While $i < $iCount_i
$oJResp.I = $i
$sAccountId = $oJResp.StringOf("BaseConfigurationItems[i].accountId")
$sArn = $oJResp.StringOf("BaseConfigurationItems[i].arn")
$sAvailabilityZone = $oJResp.StringOf("BaseConfigurationItems[i].availabilityZone")
$sAwsRegion = $oJResp.StringOf("BaseConfigurationItems[i].awsRegion")
$sConfiguration = $oJResp.StringOf("BaseConfigurationItems[i].configuration")
$iConfigurationItemCaptureTime = $oJResp.IntOf("BaseConfigurationItems[i].configurationItemCaptureTime")
$sConfigurationItemStatus = $oJResp.StringOf("BaseConfigurationItems[i].configurationItemStatus")
$sConfigurationStateId = $oJResp.StringOf("BaseConfigurationItems[i].configurationStateId")
$iResourceCreationTime = $oJResp.IntOf("BaseConfigurationItems[i].resourceCreationTime")
$sResourceId = $oJResp.StringOf("BaseConfigurationItems[i].resourceId")
$sResourceName = $oJResp.StringOf("BaseConfigurationItems[i].resourceName")
$sResourceType = $oJResp.StringOf("BaseConfigurationItems[i].resourceType")
$sV_String = $oJResp.StringOf("BaseConfigurationItems[i].supplementaryConfiguration.string")
$sVersion = $oJResp.StringOf("BaseConfigurationItems[i].version")
$i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("UnprocessedResourceIdentifiers")
While $i < $iCount_i
$oJResp.I = $i
$sResourceId = $oJResp.StringOf("UnprocessedResourceIdentifiers[i].ResourceId")
$sResourceName = $oJResp.StringOf("UnprocessedResourceIdentifiers[i].ResourceName")
$sResourceType = $oJResp.StringOf("UnprocessedResourceIdentifiers[i].ResourceType")
$sSourceAccountId = $oJResp.StringOf("UnprocessedResourceIdentifiers[i].SourceAccountId")
$sSourceRegion = $oJResp.StringOf("UnprocessedResourceIdentifiers[i].SourceRegion")
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "BaseConfigurationItems": [
; {
; "accountId": "string",
; "arn": "string",
; "availabilityZone": "string",
; "awsRegion": "string",
; "configuration": "string",
; "configurationItemCaptureTime": number,
; "configurationItemStatus": "string",
; "configurationStateId": "string",
; "resourceCreationTime": number,
; "resourceId": "string",
; "resourceName": "string",
; "resourceType": "string",
; "supplementaryConfiguration": {
; "string": "string"
; },
; "version": "string"
; }
; ],
; "UnprocessedResourceIdentifiers": [
; {
; "ResourceId": "string",
; "ResourceName": "string",
; "ResourceType": "string",
; "SourceAccountId": "string",
; "SourceRegion": "string"
; }
; ]
; }
