GetCommentsForPullRequest autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "codecommit"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://codecommit.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("codecommit.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("afterCommitId","string")
$oJson.UpdateString("beforeCommitId","string")
$oJson.UpdateInt("maxResults",123)
$oJson.UpdateString("nextToken","string")
$oJson.UpdateString("pullRequestId","string")
$oJson.UpdateString("repositoryName","string")
; The JSON request body created by the above code:
; {
; "afterCommitId": "string",
; "beforeCommitId": "string",
; "maxResults": number,
; "nextToken": "string",
; "pullRequestId": "string",
; "repositoryName": "string"
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","CodeCommit_20150413.GetCommentsForPullRequest")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sAfterBlobId
Local $sAfterCommitId
Local $sBeforeBlobId
Local $sBeforeCommitId
Local $sFilePath
Local $iFilePosition
Local $sRelativeFileVersion
Local $sPullRequestId
Local $sRepositoryName
Local $iJ
Local $iCount_j
Local $sAuthorArn
Local $sClientRequestToken
Local $sCommentId
Local $sContent
Local $iCreationDate
Local $iDeleted
Local $sInReplyTo
Local $iLastModifiedDate
Local $iV_String
Local $iK
Local $iCount_k
Local $strVal
Local $sNextToken = $oJResp.StringOf("nextToken")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("commentsForPullRequestData")
While $i < $iCount_i
$oJResp.I = $i
$sAfterBlobId = $oJResp.StringOf("commentsForPullRequestData[i].afterBlobId")
$sAfterCommitId = $oJResp.StringOf("commentsForPullRequestData[i].afterCommitId")
$sBeforeBlobId = $oJResp.StringOf("commentsForPullRequestData[i].beforeBlobId")
$sBeforeCommitId = $oJResp.StringOf("commentsForPullRequestData[i].beforeCommitId")
$sFilePath = $oJResp.StringOf("commentsForPullRequestData[i].location.filePath")
$iFilePosition = $oJResp.IntOf("commentsForPullRequestData[i].location.filePosition")
$sRelativeFileVersion = $oJResp.StringOf("commentsForPullRequestData[i].location.relativeFileVersion")
$sPullRequestId = $oJResp.StringOf("commentsForPullRequestData[i].pullRequestId")
$sRepositoryName = $oJResp.StringOf("commentsForPullRequestData[i].repositoryName")
$iJ = 0
$iCount_j = $oJResp.SizeOfArray("commentsForPullRequestData[i].comments")
While $iJ < $iCount_j
$oJResp.J = $iJ
$sAuthorArn = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].authorArn")
$sClientRequestToken = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].clientRequestToken")
$sCommentId = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].commentId")
$sContent = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].content")
$iCreationDate = $oJResp.IntOf("commentsForPullRequestData[i].comments[j].creationDate")
$iDeleted = $oJResp.IntOf("commentsForPullRequestData[i].comments[j].deleted")
$sInReplyTo = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].inReplyTo")
$iLastModifiedDate = $oJResp.IntOf("commentsForPullRequestData[i].comments[j].lastModifiedDate")
$iV_String = $oJResp.IntOf("commentsForPullRequestData[i].comments[j].reactionCounts.string")
$iK = 0
$iCount_k = $oJResp.SizeOfArray("commentsForPullRequestData[i].comments[j].callerReactions")
While $iK < $iCount_k
$oJResp.K = $iK
$strVal = $oJResp.StringOf("commentsForPullRequestData[i].comments[j].callerReactions[k]")
$iK = $iK + 1
Wend
$iJ = $iJ + 1
Wend
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "commentsForPullRequestData": [
; {
; "afterBlobId": "string",
; "afterCommitId": "string",
; "beforeBlobId": "string",
; "beforeCommitId": "string",
; "comments": [
; {
; "authorArn": "string",
; "callerReactions": [
; "string"
; ],
; "clientRequestToken": "string",
; "commentId": "string",
; "content": "string",
; "creationDate": number,
; "deleted": boolean,
; "inReplyTo": "string",
; "lastModifiedDate": number,
; "reactionCounts": {
; "string": number
; }
; }
; ],
; "location": {
; "filePath": "string",
; "filePosition": number,
; "relativeFileVersion": "string"
; },
; "pullRequestId": "string",
; "repositoryName": "string"
; }
; ],
; "nextToken": "string"
; }
