BatchGetReports autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "codebuild"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://codebuild.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("codebuild.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("reportArns[0]","string")
; The JSON request body created by the above code:
; {
; "reportArns": [
; "string"
; ]
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","CodeBuild_20161006.BatchGetReports")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sArn
Local $iBranchCoveragePercentage
Local $iBranchesCovered
Local $iBranchesMissed
Local $iLineCoveragePercentage
Local $iLinesCovered
Local $iLinesMissed
Local $iCreated
Local $sExecutionId
Local $iExpired
Local $sExportConfigType
Local $sBucket
Local $sBucketOwner
Local $iEncryptionDisabled
Local $sEncryptionKey
Local $sPackaging
Local $sPath
Local $sName
Local $sReportGroupArn
Local $status
Local $iDurationInNanoSeconds
Local $iV_String
Local $iTotal
Local $iTruncated
Local $sV_type
Local $strVal
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("reports")
While $i < $iCount_i
$oJResp.I = $i
$sArn = $oJResp.StringOf("reports[i].arn")
$iBranchCoveragePercentage = $oJResp.IntOf("reports[i].codeCoverageSummary.branchCoveragePercentage")
$iBranchesCovered = $oJResp.IntOf("reports[i].codeCoverageSummary.branchesCovered")
$iBranchesMissed = $oJResp.IntOf("reports[i].codeCoverageSummary.branchesMissed")
$iLineCoveragePercentage = $oJResp.IntOf("reports[i].codeCoverageSummary.lineCoveragePercentage")
$iLinesCovered = $oJResp.IntOf("reports[i].codeCoverageSummary.linesCovered")
$iLinesMissed = $oJResp.IntOf("reports[i].codeCoverageSummary.linesMissed")
$iCreated = $oJResp.IntOf("reports[i].created")
$sExecutionId = $oJResp.StringOf("reports[i].executionId")
$iExpired = $oJResp.IntOf("reports[i].expired")
$sExportConfigType = $oJResp.StringOf("reports[i].exportConfig.exportConfigType")
$sBucket = $oJResp.StringOf("reports[i].exportConfig.s3Destination.bucket")
$sBucketOwner = $oJResp.StringOf("reports[i].exportConfig.s3Destination.bucketOwner")
$iEncryptionDisabled = $oJResp.IntOf("reports[i].exportConfig.s3Destination.encryptionDisabled")
$sEncryptionKey = $oJResp.StringOf("reports[i].exportConfig.s3Destination.encryptionKey")
$sPackaging = $oJResp.StringOf("reports[i].exportConfig.s3Destination.packaging")
$sPath = $oJResp.StringOf("reports[i].exportConfig.s3Destination.path")
$sName = $oJResp.StringOf("reports[i].name")
$sReportGroupArn = $oJResp.StringOf("reports[i].reportGroupArn")
$status = $oJResp.StringOf("reports[i].status")
$iDurationInNanoSeconds = $oJResp.IntOf("reports[i].testSummary.durationInNanoSeconds")
$iV_String = $oJResp.IntOf("reports[i].testSummary.statusCounts.string")
$iTotal = $oJResp.IntOf("reports[i].testSummary.total")
$iTruncated = $oJResp.IntOf("reports[i].truncated")
$sV_type = $oJResp.StringOf("reports[i].type")
$i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("reportsNotFound")
While $i < $iCount_i
$oJResp.I = $i
$strVal = $oJResp.StringOf("reportsNotFound[i]")
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "reports": [
; {
; "arn": "string",
; "codeCoverageSummary": {
; "branchCoveragePercentage": number,
; "branchesCovered": number,
; "branchesMissed": number,
; "lineCoveragePercentage": number,
; "linesCovered": number,
; "linesMissed": number
; },
; "created": number,
; "executionId": "string",
; "expired": number,
; "exportConfig": {
; "exportConfigType": "string",
; "s3Destination": {
; "bucket": "string",
; "bucketOwner": "string",
; "encryptionDisabled": boolean,
; "encryptionKey": "string",
; "packaging": "string",
; "path": "string"
; }
; },
; "name": "string",
; "reportGroupArn": "string",
; "status": "string",
; "testSummary": {
; "durationInNanoSeconds": number,
; "statusCounts": {
; "string": number
; },
; "total": number
; },
; "truncated": boolean,
; "type": "string"
; }
; ],
; "reportsNotFound": [
; "string"
; ]
; }
