CreateCluster autoit Example
; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.
$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess
$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"
; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "cloudhsm"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)
; URL: https://cloudhsmv2.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("cloudhsmv2.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
; The following code creates the JSON request body.
; The JSON created by this code is shown below.
; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON
$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("BackupRetentionPolicy.Type","string")
$oJson.UpdateString("BackupRetentionPolicy.Value","string")
$oJson.UpdateString("HsmType","string")
$oJson.UpdateString("SourceBackupId","string")
$oJson.UpdateString("SubnetIds[0]","string")
$oJson.UpdateString("TagList[0].Key","string")
$oJson.UpdateString("TagList[0].Value","string")
; The JSON request body created by the above code:
; {
; "BackupRetentionPolicy": {
; "Type": "string",
; "Value": "string"
; },
; "HsmType": "string",
; "SourceBackupId": "string",
; "SubnetIds": [
; "string"
; ],
; "TagList": [
; {
; "Key": "string",
; "Value": "string"
; }
; ]
; }
$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","BaldrApiService.CreateCluster")
$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
ConsoleWrite($oRest.LastErrorText & @CRLF)
Exit
EndIf
Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
ConsoleWrite("Response Header:" & @CRLF)
ConsoleWrite($oRest.ResponseHeader & @CRLF)
ConsoleWrite("Response Body:" & @CRLF)
ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
Exit
EndIf
$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)
; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.
; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON
Local $sAvailabilityZone
Local $sEniId
Local $sEniIp
Local $sHsmId
Local $sSubnetId
Local $sKey
Local $sBackupPolicy = $oJResp.StringOf("Cluster.BackupPolicy")
Local $sV_Type = $oJResp.StringOf("Cluster.BackupRetentionPolicy.Type")
Local $sValue = $oJResp.StringOf("Cluster.BackupRetentionPolicy.Value")
Local $sAwsHardwareCertificate = $oJResp.StringOf("Cluster.Certificates.AwsHardwareCertificate")
Local $sClusterCertificate = $oJResp.StringOf("Cluster.Certificates.ClusterCertificate")
Local $sClusterCsr = $oJResp.StringOf("Cluster.Certificates.ClusterCsr")
Local $sHsmCertificate = $oJResp.StringOf("Cluster.Certificates.HsmCertificate")
Local $sManufacturerHardwareCertificate = $oJResp.StringOf("Cluster.Certificates.ManufacturerHardwareCertificate")
Local $sClusterId = $oJResp.StringOf("Cluster.ClusterId")
Local $iCreateTimestamp = $oJResp.IntOf("Cluster.CreateTimestamp")
Local $sHsmType = $oJResp.StringOf("Cluster.HsmType")
Local $sPreCoPassword = $oJResp.StringOf("Cluster.PreCoPassword")
Local $sSecurityGroup = $oJResp.StringOf("Cluster.SecurityGroup")
Local $sSourceBackupId = $oJResp.StringOf("Cluster.SourceBackupId")
Local $sState = $oJResp.StringOf("Cluster.State")
Local $sStateMessage = $oJResp.StringOf("Cluster.StateMessage")
Local $sV_String = $oJResp.StringOf("Cluster.SubnetMapping.string")
Local $sVpcId = $oJResp.StringOf("Cluster.VpcId")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("Cluster.Hsms")
While $i < $iCount_i
$oJResp.I = $i
$sAvailabilityZone = $oJResp.StringOf("Cluster.Hsms[i].AvailabilityZone")
$sClusterId = $oJResp.StringOf("Cluster.Hsms[i].ClusterId")
$sEniId = $oJResp.StringOf("Cluster.Hsms[i].EniId")
$sEniIp = $oJResp.StringOf("Cluster.Hsms[i].EniIp")
$sHsmId = $oJResp.StringOf("Cluster.Hsms[i].HsmId")
$sState = $oJResp.StringOf("Cluster.Hsms[i].State")
$sStateMessage = $oJResp.StringOf("Cluster.Hsms[i].StateMessage")
$sSubnetId = $oJResp.StringOf("Cluster.Hsms[i].SubnetId")
$i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("Cluster.TagList")
While $i < $iCount_i
$oJResp.I = $i
$sKey = $oJResp.StringOf("Cluster.TagList[i].Key")
$sValue = $oJResp.StringOf("Cluster.TagList[i].Value")
$i = $i + 1
Wend
; A sample JSON response body parsed by the above code:
; {
; "Cluster": {
; "BackupPolicy": "string",
; "BackupRetentionPolicy": {
; "Type": "string",
; "Value": "string"
; },
; "Certificates": {
; "AwsHardwareCertificate": "string",
; "ClusterCertificate": "string",
; "ClusterCsr": "string",
; "HsmCertificate": "string",
; "ManufacturerHardwareCertificate": "string"
; },
; "ClusterId": "string",
; "CreateTimestamp": number,
; "Hsms": [
; {
; "AvailabilityZone": "string",
; "ClusterId": "string",
; "EniId": "string",
; "EniIp": "string",
; "HsmId": "string",
; "State": "string",
; "StateMessage": "string",
; "SubnetId": "string"
; }
; ],
; "HsmType": "string",
; "PreCoPassword": "string",
; "SecurityGroup": "string",
; "SourceBackupId": "string",
; "State": "string",
; "StateMessage": "string",
; "SubnetMapping": {
; "string": "string"
; },
; "TagList": [
; {
; "Key": "string",
; "Value": "string"
; }
; ],
; "VpcId": "string"
; }
; }
