Chilkat Online Tools

DeleteImageBuilder TCL Example

Amazon AppStream

load ./chilkat.dll

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

set rest [new_CkRest]

set authAws [new_CkAuthAws]

CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "appstream"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws

# URL: https://appstream2.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "appstream2.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
    puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
    puts [CkRest_lastErrorText $rest]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    exit
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

set json [new_CkJsonObject]

CkJsonObject_UpdateString $json "Name" "string"

# The JSON request body created by the above code:

# {
#   "Name": "string"
# }

CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "PhotonAdminProxyService.DeleteImageBuilder"

set sbRequestBody [new_CkStringBuilder]

CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]

set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
    puts [CkRest_lastErrorText $rest]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    delete_CkJsonObject $json
    delete_CkStringBuilder $sbRequestBody
    delete_CkStringBuilder $sbResponseBody
    exit
}

set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
    puts "Response Header:"
    puts [CkRest_responseHeader $rest]
    puts "Response Body:"
    puts [CkStringBuilder_getAsString $sbResponseBody]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    delete_CkJsonObject $json
    delete_CkStringBuilder $sbRequestBody
    delete_CkStringBuilder $sbResponseBody
    exit
}

set jResp [new_CkJsonObject]

CkJsonObject_LoadSb $jResp $sbResponseBody

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

set AppstreamAgentVersion [CkJsonObject_stringOf $jResp "ImageBuilder.AppstreamAgentVersion"]
set Arn [CkJsonObject_stringOf $jResp "ImageBuilder.Arn"]
set CreatedTime [CkJsonObject_IntOf $jResp "ImageBuilder.CreatedTime"]
set Description [CkJsonObject_stringOf $jResp "ImageBuilder.Description"]
set DisplayName [CkJsonObject_stringOf $jResp "ImageBuilder.DisplayName"]
set DirectoryName [CkJsonObject_stringOf $jResp "ImageBuilder.DomainJoinInfo.DirectoryName"]
set OrganizationalUnitDistinguishedName [CkJsonObject_stringOf $jResp "ImageBuilder.DomainJoinInfo.OrganizationalUnitDistinguishedName"]
set EnableDefaultInternetAccess [CkJsonObject_IntOf $jResp "ImageBuilder.EnableDefaultInternetAccess"]
set IamRoleArn [CkJsonObject_stringOf $jResp "ImageBuilder.IamRoleArn"]
set ImageArn [CkJsonObject_stringOf $jResp "ImageBuilder.ImageArn"]
set InstanceType [CkJsonObject_stringOf $jResp "ImageBuilder.InstanceType"]
set Name [CkJsonObject_stringOf $jResp "ImageBuilder.Name"]
set EniId [CkJsonObject_stringOf $jResp "ImageBuilder.NetworkAccessConfiguration.EniId"]
set EniPrivateIpAddress [CkJsonObject_stringOf $jResp "ImageBuilder.NetworkAccessConfiguration.EniPrivateIpAddress"]
set Platform [CkJsonObject_stringOf $jResp "ImageBuilder.Platform"]
set State [CkJsonObject_stringOf $jResp "ImageBuilder.State"]
set Code [CkJsonObject_stringOf $jResp "ImageBuilder.StateChangeReason.Code"]
set Message [CkJsonObject_stringOf $jResp "ImageBuilder.StateChangeReason.Message"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ImageBuilder.AccessEndpoints"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set EndpointType [CkJsonObject_stringOf $jResp "ImageBuilder.AccessEndpoints[i].EndpointType"]
    set VpceId [CkJsonObject_stringOf $jResp "ImageBuilder.AccessEndpoints[i].VpceId"]
    set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ImageBuilder.ImageBuilderErrors"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set ErrorCode [CkJsonObject_stringOf $jResp "ImageBuilder.ImageBuilderErrors[i].ErrorCode"]
    set ErrorMessage [CkJsonObject_stringOf $jResp "ImageBuilder.ImageBuilderErrors[i].ErrorMessage"]
    set ErrorTimestamp [CkJsonObject_IntOf $jResp "ImageBuilder.ImageBuilderErrors[i].ErrorTimestamp"]
    set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ImageBuilder.VpcConfig.SecurityGroupIds"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set strVal [CkJsonObject_stringOf $jResp "ImageBuilder.VpcConfig.SecurityGroupIds[i]"]
    set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ImageBuilder.VpcConfig.SubnetIds"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set strVal [CkJsonObject_stringOf $jResp "ImageBuilder.VpcConfig.SubnetIds[i]"]
    set i [expr $i + 1]
}

# A sample JSON response body parsed by the above code:

# {
#   "ImageBuilder": {
#     "AccessEndpoints": [
#       {
#         "EndpointType": "string",
#         "VpceId": "string"
#       }
#     ],
#     "AppstreamAgentVersion": "string",
#     "Arn": "string",
#     "CreatedTime": number,
#     "Description": "string",
#     "DisplayName": "string",
#     "DomainJoinInfo": {
#       "DirectoryName": "string",
#       "OrganizationalUnitDistinguishedName": "string"
#     },
#     "EnableDefaultInternetAccess": boolean,
#     "IamRoleArn": "string",
#     "ImageArn": "string",
#     "ImageBuilderErrors": [
#       {
#         "ErrorCode": "string",
#         "ErrorMessage": "string",
#         "ErrorTimestamp": number
#       }
#     ],
#     "InstanceType": "string",
#     "Name": "string",
#     "NetworkAccessConfiguration": {
#       "EniId": "string",
#       "EniPrivateIpAddress": "string"
#     },
#     "Platform": "string",
#     "State": "string",
#     "StateChangeReason": {
#       "Code": "string",
#       "Message": "string"
#     },
#     "VpcConfig": {
#       "SecurityGroupIds": [
#         "string"
#       ],
#       "SubnetIds": [
#         "string"
#       ]
#     }
#   }
# }

delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp