ReplicateKey TCL Example
load ./chilkat.dll
# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.
set rest [new_CkRest]
set authAws [new_CkAuthAws]
CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"
# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "kms"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws
# URL: https://kms.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "kms.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
exit
}
# The following code creates the JSON request body.
# The JSON created by this code is shown below.
# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON
set json [new_CkJsonObject]
CkJsonObject_UpdateInt $json "BypassPolicyLockoutSafetyCheck" 123
CkJsonObject_UpdateString $json "Description" "string"
CkJsonObject_UpdateString $json "KeyId" "string"
CkJsonObject_UpdateString $json "Policy" "string"
CkJsonObject_UpdateString $json "ReplicaRegion" "string"
CkJsonObject_UpdateString $json "Tags[0].TagKey" "string"
CkJsonObject_UpdateString $json "Tags[0].TagValue" "string"
# The JSON request body created by the above code:
# {
# "BypassPolicyLockoutSafetyCheck": boolean,
# "Description": "string",
# "KeyId": "string",
# "Policy": "string",
# "ReplicaRegion": "string",
# "Tags": [
# {
# "TagKey": "string",
# "TagValue": "string"
# }
# ]
# }
CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "TrentService.ReplicateKey"
set sbRequestBody [new_CkStringBuilder]
CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]
set success [CkRest_FullRequestSb $rest "POST" "/" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
puts [CkRest_lastErrorText $rest]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
puts "Response Header:"
puts [CkRest_responseHeader $rest]
puts "Response Body:"
puts [CkStringBuilder_getAsString $sbResponseBody]
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
exit
}
set jResp [new_CkJsonObject]
CkJsonObject_LoadSb $jResp $sbResponseBody
# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.
# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON
set Arn [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.Arn"]
set AWSAccountId [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.AWSAccountId"]
set CloudHsmClusterId [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.CloudHsmClusterId"]
set CreationDate [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.CreationDate"]
set CustomerMasterKeySpec [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.CustomerMasterKeySpec"]
set CustomKeyStoreId [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.CustomKeyStoreId"]
set DeletionDate [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.DeletionDate"]
set Description [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.Description"]
set Enabled [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.Enabled"]
set ExpirationModel [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.ExpirationModel"]
set KeyId [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.KeyId"]
set KeyManager [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.KeyManager"]
set KeySpec [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.KeySpec"]
set KeyState [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.KeyState"]
set KeyUsage [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.KeyUsage"]
set MultiRegion [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.MultiRegion"]
set MultiRegionKeyType [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.MultiRegionKeyType"]
set PrimaryKeyArn [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.PrimaryKey.Arn"]
set Region [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.PrimaryKey.Region"]
set Origin [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.Origin"]
set PendingDeletionWindowInDays [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.PendingDeletionWindowInDays"]
set ValidTo [CkJsonObject_IntOf $jResp "ReplicaKeyMetadata.ValidTo"]
set ReplicaPolicy [CkJsonObject_stringOf $jResp "ReplicaPolicy"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ReplicaKeyMetadata.EncryptionAlgorithms"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.EncryptionAlgorithms[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ReplicaKeyMetadata.MacAlgorithms"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MacAlgorithms[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.ReplicaKeys"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set Arn [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.ReplicaKeys[i].Arn"]
set Region [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.MultiRegionConfiguration.ReplicaKeys[i].Region"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ReplicaKeyMetadata.SigningAlgorithms"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set strVal [CkJsonObject_stringOf $jResp "ReplicaKeyMetadata.SigningAlgorithms[i]"]
set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "ReplicaTags"]
while {$i < $count_i} {
CkJsonObject_put_I $jResp $i
set TagKey [CkJsonObject_stringOf $jResp "ReplicaTags[i].TagKey"]
set TagValue [CkJsonObject_stringOf $jResp "ReplicaTags[i].TagValue"]
set i [expr $i + 1]
}
# A sample JSON response body parsed by the above code:
# {
# "ReplicaKeyMetadata": {
# "Arn": "string",
# "AWSAccountId": "string",
# "CloudHsmClusterId": "string",
# "CreationDate": number,
# "CustomerMasterKeySpec": "string",
# "CustomKeyStoreId": "string",
# "DeletionDate": number,
# "Description": "string",
# "Enabled": boolean,
# "EncryptionAlgorithms": [
# "string"
# ],
# "ExpirationModel": "string",
# "KeyId": "string",
# "KeyManager": "string",
# "KeySpec": "string",
# "KeyState": "string",
# "KeyUsage": "string",
# "MacAlgorithms": [
# "string"
# ],
# "MultiRegion": boolean,
# "MultiRegionConfiguration": {
# "MultiRegionKeyType": "string",
# "PrimaryKey": {
# "Arn": "string",
# "Region": "string"
# },
# "ReplicaKeys": [
# {
# "Arn": "string",
# "Region": "string"
# }
# ]
# },
# "Origin": "string",
# "PendingDeletionWindowInDays": number,
# "SigningAlgorithms": [
# "string"
# ],
# "ValidTo": number
# },
# "ReplicaPolicy": "string",
# "ReplicaTags": [
# {
# "TagKey": "string",
# "TagValue": "string"
# }
# ]
# }
delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp
