Chilkat Online Tools

UpdateReplicationConfigurationTemplate TCL Example

AWS Elastic Disaster Recovery

load ./chilkat.dll

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

set rest [new_CkRest]

set authAws [new_CkAuthAws]

CkAuthAws_put_AccessKey $authAws "AWS_ACCESS_KEY"
CkAuthAws_put_SecretKey $authAws "AWS_SECRET_KEY"

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
CkAuthAws_put_Region $authAws "us-west-2"
CkAuthAws_put_ServiceName $authAws "drs"
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
CkRest_SetAuthAws $rest $authAws

# URL: https://drs.us-west-2.amazonaws.com/
# Use the same region as specified above.
set success [CkRest_Connect $rest "drs.us-west-2.amazonaws.com" 443 1 1]
if {$success != 1} then {
    puts "ConnectFailReason: [CkRest_get_ConnectFailReason $rest]"
    puts [CkRest_lastErrorText $rest]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    exit
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

set json [new_CkJsonObject]

CkJsonObject_UpdateString $json "arn" "string"
CkJsonObject_UpdateInt $json "associateDefaultSecurityGroup" 123
CkJsonObject_UpdateInt $json "bandwidthThrottling" 123
CkJsonObject_UpdateInt $json "createPublicIP" 123
CkJsonObject_UpdateString $json "dataPlaneRouting" "string"
CkJsonObject_UpdateString $json "defaultLargeStagingDiskType" "string"
CkJsonObject_UpdateString $json "ebsEncryption" "string"
CkJsonObject_UpdateString $json "ebsEncryptionKeyArn" "string"
CkJsonObject_UpdateInt $json "pitPolicy[0].enabled" 123
CkJsonObject_UpdateInt $json "pitPolicy[0].interval" 123
CkJsonObject_UpdateInt $json "pitPolicy[0].retentionDuration" 123
CkJsonObject_UpdateInt $json "pitPolicy[0].ruleID" 123
CkJsonObject_UpdateString $json "pitPolicy[0].units" "string"
CkJsonObject_UpdateString $json "replicationConfigurationTemplateID" "string"
CkJsonObject_UpdateString $json "replicationServerInstanceType" "string"
CkJsonObject_UpdateString $json "replicationServersSecurityGroupsIDs[0]" "string"
CkJsonObject_UpdateString $json "stagingAreaSubnetId" "string"
CkJsonObject_UpdateString $json "stagingAreaTags.string" "string"
CkJsonObject_UpdateInt $json "useDedicatedReplicationServer" 123

# The JSON request body created by the above code:

# {
#   "arn": "string",
#   "associateDefaultSecurityGroup": boolean,
#   "bandwidthThrottling": number,
#   "createPublicIP": boolean,
#   "dataPlaneRouting": "string",
#   "defaultLargeStagingDiskType": "string",
#   "ebsEncryption": "string",
#   "ebsEncryptionKeyArn": "string",
#   "pitPolicy": [
#     {
#       "enabled": boolean,
#       "interval": number,
#       "retentionDuration": number,
#       "ruleID": number,
#       "units": "string"
#     }
#   ],
#   "replicationConfigurationTemplateID": "string",
#   "replicationServerInstanceType": "string",
#   "replicationServersSecurityGroupsIDs": [
#     "string"
#   ],
#   "stagingAreaSubnetId": "string",
#   "stagingAreaTags": {
#     "string": "string"
#   },
#   "useDedicatedReplicationServer": boolean
# }

CkRest_AddHeader $rest "Content-Type" "application/x-amz-json-1.1"
CkRest_AddHeader $rest "X-Amz-Target" "UpdateReplicationConfigurationTemplate"

set sbRequestBody [new_CkStringBuilder]

CkJsonObject_EmitSb $json $sbRequestBody
set sbResponseBody [new_CkStringBuilder]

set success [CkRest_FullRequestSb $rest "POST" "/UpdateReplicationConfigurationTemplate" $sbRequestBody $sbResponseBody]
if {$success != 1} then {
    puts [CkRest_lastErrorText $rest]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    delete_CkJsonObject $json
    delete_CkStringBuilder $sbRequestBody
    delete_CkStringBuilder $sbResponseBody
    exit
}

set respStatusCode [CkRest_get_ResponseStatusCode $rest]
puts "response status code = $respStatusCode"
if {$respStatusCode != 200} then {
    puts "Response Header:"
    puts [CkRest_responseHeader $rest]
    puts "Response Body:"
    puts [CkStringBuilder_getAsString $sbResponseBody]
    delete_CkRest $rest
    delete_CkAuthAws $authAws
    delete_CkJsonObject $json
    delete_CkStringBuilder $sbRequestBody
    delete_CkStringBuilder $sbResponseBody
    exit
}

set jResp [new_CkJsonObject]

CkJsonObject_LoadSb $jResp $sbResponseBody

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

set arn [CkJsonObject_stringOf $jResp "arn"]
set associateDefaultSecurityGroup [CkJsonObject_IntOf $jResp "associateDefaultSecurityGroup"]
set bandwidthThrottling [CkJsonObject_IntOf $jResp "bandwidthThrottling"]
set createPublicIP [CkJsonObject_IntOf $jResp "createPublicIP"]
set dataPlaneRouting [CkJsonObject_stringOf $jResp "dataPlaneRouting"]
set defaultLargeStagingDiskType [CkJsonObject_stringOf $jResp "defaultLargeStagingDiskType"]
set ebsEncryption [CkJsonObject_stringOf $jResp "ebsEncryption"]
set ebsEncryptionKeyArn [CkJsonObject_stringOf $jResp "ebsEncryptionKeyArn"]
set replicationConfigurationTemplateID [CkJsonObject_stringOf $jResp "replicationConfigurationTemplateID"]
set replicationServerInstanceType [CkJsonObject_stringOf $jResp "replicationServerInstanceType"]
set stagingAreaSubnetId [CkJsonObject_stringOf $jResp "stagingAreaSubnetId"]
set v_String [CkJsonObject_stringOf $jResp "stagingAreaTags.string"]
set tagsString [CkJsonObject_stringOf $jResp "tags.string"]
set useDedicatedReplicationServer [CkJsonObject_IntOf $jResp "useDedicatedReplicationServer"]
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "pitPolicy"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set enabled [CkJsonObject_IntOf $jResp "pitPolicy[i].enabled"]
    set interval [CkJsonObject_IntOf $jResp "pitPolicy[i].interval"]
    set retentionDuration [CkJsonObject_IntOf $jResp "pitPolicy[i].retentionDuration"]
    set ruleID [CkJsonObject_IntOf $jResp "pitPolicy[i].ruleID"]
    set units [CkJsonObject_stringOf $jResp "pitPolicy[i].units"]
    set i [expr $i + 1]
}
set i 0
set count_i [CkJsonObject_SizeOfArray $jResp "replicationServersSecurityGroupsIDs"]
while {$i < $count_i} {
    CkJsonObject_put_I $jResp $i
    set strVal [CkJsonObject_stringOf $jResp "replicationServersSecurityGroupsIDs[i]"]
    set i [expr $i + 1]
}

# A sample JSON response body parsed by the above code:

# {
#   "arn": "string",
#   "associateDefaultSecurityGroup": boolean,
#   "bandwidthThrottling": number,
#   "createPublicIP": boolean,
#   "dataPlaneRouting": "string",
#   "defaultLargeStagingDiskType": "string",
#   "ebsEncryption": "string",
#   "ebsEncryptionKeyArn": "string",
#   "pitPolicy": [
#     {
#       "enabled": boolean,
#       "interval": number,
#       "retentionDuration": number,
#       "ruleID": number,
#       "units": "string"
#     }
#   ],
#   "replicationConfigurationTemplateID": "string",
#   "replicationServerInstanceType": "string",
#   "replicationServersSecurityGroupsIDs": [
#     "string"
#   ],
#   "stagingAreaSubnetId": "string",
#   "stagingAreaTags": {
#     "string": "string"
#   },
#   "tags": {
#     "string": "string"
#   },
#   "useDedicatedReplicationServer": boolean
# }

delete_CkRest $rest
delete_CkAuthAws $authAws
delete_CkJsonObject $json
delete_CkStringBuilder $sbRequestBody
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp